Abstract
The mechanical properties and microstructure of warm forged 27MnSiVS6 steel was evaluated at temperatures between 850 and 760 °C. The strength values showed enhancement by about 50 MPa, while the impact toughness was almost doubled. The microstructure showed increase in ferrite content with decreasing warm forging temperature, and the ferritic grains showed finer grain structure. While the increased ferrite content resulted in limiting the strength enhancement, the fineness of the grain structure led to a significant enhancement in impact toughness. The ductile-to-brittle transition temperature was pushed to a significantly low temperature in the warm forged steel compared to the hot-rolled steel. The microstructure evolution at various stages of processing was brought out.
Similar content being viewed by others
References
Fisher K, Schweiger H, Hasenberger J, and Dremel H, New Tool Steel for Warm and Hot Forging, 6th International Tooling Conference, Karlstad, Sweden, September (2002) p 10.
Jahazi M, and Eghbali B, J Mater Process Technol 113 (2001) 594.
Zhang X, Cai Q, Zhou G, Chen Q, and Xiong Y, J Mater Sci 46 (2011) 1789.
Zajac S, Siwecki T, Hutchinso W B, and Lagnebo R, ISIJ Int 38 (1998) 1130.
Majta J, and Bator A, J Mater Process Technol 125–126 (2002) 77.
Songa R, Ponge D, Raabe D, Speer J G, and Matlock D K, Mater Sci Eng A 441 (2006) 1.
Zhao P, and Boyd J D, Mater Sci Technol 23 (2007) 1186.
Eghbali B, Mater Sci Eng A 527 (2010) 3407.
Spena P R, and Firrao D, Mater Sci Eng A 560 (2013) 208.
Sas J, Kvackaj T, Milkovic O, and Zemko M, Material 9 (2016) 971.
Shena X J, Tanga S, Wua Y J, Yanga X L, Chena J, Liua X Y, Misra R D K, and Wang G D, Mater Sci Eng A 685 (2017) 194.
Caminagaa C, Botta Filhob W J, Silvaa M L N, and Buttona S T, Proc Eng 10 (2011) 512.
Acknowledgements
The authors wish to thank Ms. V Madhuri for the SEM support and the colleagues in QAD for the support in steel characterization.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Raghu, K., Balachandran, G. & Ravichandar, D. Microstructure and Mechanical Properties in Warm Forged 27MnSiVS6 Microalloyed Steel. Trans Indian Inst Met 72, 411–421 (2019). https://doi.org/10.1007/s12666-018-1492-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-018-1492-8