Abstract
In the present investigation, microstructure of the modified 9Cr–1Mo (T91) steel was refined through thermo-mechanical treatment (TMT). The finer precipitation of M23C6 and MX precipitates were observed in the TMT processed T91 steel. Creep deformation behaviour of T91 steel and TMT processed T91 steel was carried out at 923 K. The minimum creep rate of the TMT processed steel was significantly lowered as compared to T91 steel. The TMT processing of modified 9Cr–1Mo steel resulted in enhancement of creep strength due to presence of finer precipitates which relatively delayed the recovery of dislocation structure and coarsening of sub-boundaries than the steel in the normalized and tempered condition.
Similar content being viewed by others
References
Fujio Abe, Adv Sci Technol, 72 (2010), 12.
Laha K, Chandravathi K S, Parameswaran P, Bhanu Sankara Rao K, and Mannan S L, Metall Mater Trans A, 38A (2007), 58.
Sakthivel T, Panneer Selvi S, and Laha K, Mater Sci Eng A, 640 (2015), 61.
Fedorova I, Kipelova A, Belyakov A, and Kaibyshev R, Metall Mater Trans A, 44A, (2013), 128.
Klueh R L, Hashimoto N, and Maziasz P J, J Nucl Mater 367–370 (2007), 48.
Tan L, Busby J T, Maziasz P J, and Yamamoto Y, J Nucl Mater 441 (2013), 713.
Li S, Eliniyaz Z, Sun F, Shen Y, Zhang L, and Shan A, Mater Sci Eng A, 559 (2013), 882.
Tan L, Yang Y, and Busby J T, J Nucl Mater 442 (2013), S13.
Kunimitsu S, You Y, Kasuya N, Sasaki Y, and Hosoi Y, J Nucl Mater 179–181 (1991), 689.
Hollner S, Fournier B, Le Pendu J, Cozzika T, Tournié I, Brachet J-C, and Pineau A, J Nucl Mater 405 (2010), 101.
ByunT S, Yoon J H, Hoelzer D T, Lee Y B, Kang S H, and Maloy S A, J Nucl Mater 449 (2014), 290.
Oksiuta Z, Mueller P, Spätig P, and Baluc N, J Nucl Mater 412 (2011), 221.
Acknowledgments
Authors acknowledge Board of Research in Nuclear Sciences (BRNS) for providing financial support to carry out this work.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sakthivel, T., Shruti, P., Parameswaran, P. et al. Enhancement in Creep Strength of Modified 9CR–1MO Steel Through Thermo-Mechanical Treatment. Trans Indian Inst Met 70, 1177–1182 (2017). https://doi.org/10.1007/s12666-016-0902-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-016-0902-z