Abstract
As the weak part in shale formations, the bedding plane is an important element affecting the stability of boreholes and the formation of hydraulic fracture networks. To study the influence of bedding plane on the progressive failure process of rock, a series of uniaxial compressive tests were conducted on shale samples with bedding plane orientations (θ) of 0–90° with respect to the axial stress directions. The pre-peak failure process of shale observed during the tests is divided into three stages: the elastic deformation stage during which axial strains mainly occur, the stable crack growth stage during which the axial strains equal the lateral strains except for θ = 0° and 15°, and the unstable crack growth stage during which lateral strains are dominant. The peak strengths, crack damage stresses, and the corresponding strains are greatly influenced by the initial anisotropy; however, the crack initiation stresses and corresponding strain thresholds change only slightly. While the normalized lateral strain (ε 3cd/ε 3ucs) for the crack damage stress is strongly affected by the bedding structure, the other normalized stress and strain quantities can be used to predict the failure process of anisotropic rocks. The newly developed measure of brittleness index m, determined by the peak strength, peak axial strain, and elastic modulus, reflects the whole progressive failure process and was verified in the tests as a reasonable and accurate index.
Similar content being viewed by others
References
Amann F, Button EA, Evans KF, Gischig VS, Blümel M (2011) Experimental study of the brittle behavior of clay shale in rapid unconfined compression. Rock Mech Rock Eng 44(4):415–430
Bieniawski ZT (1968) Fracture dynamics of rock. Int J Fract Mech 4(4):415–430
Chen ZH, Tham LG, Yeung MR, Xie H (2006) Confinement effects for damage and failure of brittle rocks. Int J Rock Mech Min Sci 43(8):1262–1269
Chen WL, Zhou W, Luo P, Deng HC, Li Q, Shan R, Qi MH (2013) Analysis of the shale gas reservoir in the lower Silurian Longmaxi formation, Changxin 1 well, southeast Sichuan basin, China. Acta Petrol Sin 29(03):1073–1086 (in Chinese)
Eberhardt E, Stead D, Stimpson B, Read RS (1998) Identifying crack initiation and propagation thresholds in brittle rock. Can Geotech J 35(2):222–233
Hajiabdolmajid V, Kaiser P (2003) Brittleness of rock and stability assessment in hard rock tunneling. Tunn Undergr Space Technol 18(1):35–48
Jia CG, Chen JH, Guo YT, Yang CH, Xu JB, Wang L (2013) Research on mechanical behaviors and failure modes of layer shale. Rock Soil Mech 34(S2):57–61 (in Chinese)
Martin CD, Chandler NA (1994) The progressive fracture of Lac du Bonnet granite. Int J Rock Mech Min Sci 31(6):643–659
Qin SQ, Wang YY, Ma P (2010) Exponential laws of critical displacement evolution for landslides and avalances. Chin J Rock Mech Eng 29(05):873–880 (in Chinese)
Wang YM, Dong DZ, Li JZ, Wang SJ, Li XJ, Wang L, Cheng KM, Huang JL (2012) Reservoir characteristics of shale gas in Longmaxi formation of the lower Silurian, southern Sichuan. Acta Petrol Sin 04:551–561 (in Chinese)
Wang P, Ji Y, Pan R, Wang Z, Wu Y (2013) A comprehensive evaluation methodology of shale brittleness: a case study from the lower Silurian Longmaxi Fm in Block W, Sichuan Basin. Nat Gas Ind 33(12):48–53 (in Chinese)
Xue L (2011) Renormalization study on rock failure and its application to strong earthquake prediction. Dissertation, Institute of Geology and Geophysics Chinese Academy of Sciences (in Chinese)
Xue L, Qin SQ, Sun Q, Wang YY, Lee LM, Li WC (2014) A study on crack damage stress thresholds of different rock types based on uniaxial compression tests. Rock Mech Rock Eng 47(4):1183–1195
Xue L, Qi M, Qin SQ, Li GL, Li P, Wang MM (2015) A potential strain indicator for brittle failure prediction of low-porosity rock: Part I—experimental studies based on the uniaxial compression test. Rock Mech Rock Eng 48(5):1763–1772
Yang J, Fu Y, Chen H, Zeng L, Li J (2012) Rock mechanical characteristics of shale reservoirs. Nat Gas Ind 32(07):12–14+100. (in Chinese)
Yao GH, Chen Q, Liu H, Tan YH, Wang LS, Du HY (2015) Experimental study on mechanical properties of bedding shale in lower Silurian Longmaxi shale southeast Chongqing. Chin J Rock Mech Eng 34(S1):3313–3319 (in Chinese)
Zhou H, Meng F, Zhang C, Xu R, Lu J (2014) Quantitative evaluation of rock brittleness based on stress–strain curve. Chin J Rock Mech Eng 33(06):1114–1122 (in Chinese)
Acknowledgments
This work was supported by the Strategic Priority Research Program of the Chinese Academy of Sciences, Grant No. XDB10030302, the National Natural Science Foundation of China (No. 41302233), and the Project funded by China Postdoctoral Science Foundation (No. 2014T70121).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, M., Li, P., Wu, X. et al. A study on the brittleness and progressive failure process of anisotropic shale. Environ Earth Sci 75, 886 (2016). https://doi.org/10.1007/s12665-016-5700-8
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12665-016-5700-8