Skip to main content
Log in

Preparation of double-sided biaxially textured magnesium oxide thin films

  • Published:
Rare Metals Aims and scope Submit manuscript

Abstract

A high-efficiency system was designed as an improvement in conventional reel-to-reel system for ion beam-assisted deposition (IBAD) and homo-epitaxy of double-sided biaxially textured MgO thin films. This system enables Hastelloy tape to flip automatically and go through the deposition area twice in order to deposit MgO on its both sides. With this system, the output of double-sided IBAD-MgO is elevated to be 30 m·h−1. A 30-m tapes with 10-nm-thick double-sided biaxially textured MgO thin films was successfully made. X-ray diffraction (XRD) and atomic force microscope (AFM) show identical quality of MgO thin films on both sides. The yield full width at half maximum values of out-of-plane texture and in-plane texture on both sides are approximately 3.1° and 5.3°, respectively. Moreover, the influence of ion beam flux and deposition rate on the texture of thin film was investigated. A process window in which biaxial texture can be obtained is found for large-scale production.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  1. Thomas H, Marian A, Chervyakov A, Stückrad S, Salmieri D, Rubbia C. Superconducting transmission lines—sustainable electric energy transfer with higher public acceptance. Renew Sustain Energy Rev. 2016;55:59.

    Article  CAS  Google Scholar 

  2. Rupich MW, Schoop U, Verebelyi DT, Thieme CLH, Buczek D, Li X, Zhang W, Kodenkandath T, Huang Y, Siegal E, Carter W, Nguyen N, Schreiber J, Prasova M, Lynch J, Tucker D, Harnois R, King C, Aized D. The development of second generation HTS wire at American superconductor. IEEE Trans Appl Supercond. 2007;17(2):3379.

    Article  CAS  Google Scholar 

  3. Yanagisawa Y, Piao R, Iguchi S, Nakagome H, Takao T, Kominato K, Hamada M, Matsumoto S, Suematsu H, Jin X, Takahashi M, Yamazaki T, Maeda H. Operation of a 400 MHz NMR magnet using a (RE: rare earth) Ba2Cu3O7−x high-temperature superconducting coil: towards an ultra-compact super-high field NMR spectrometer operated beyond 1 GHz. J Magn Reson. 2014;249:38.

    Article  CAS  Google Scholar 

  4. Bascunan J, Hahn S, Kim Y, Iwasa Y. A new high-temperature superconducting (HTS) 700-MHz insert magnet for a 1.3-GHz LTS/HTS NMR magnet. IEEE Trans Appl Supercond. 2013;23(3):4400304.

    Article  Google Scholar 

  5. Barnes PN, Sumption MD, Rhoads GL. Review of high power density superconducting generators: present state and prospects for incorporating YBCO windings. Cryogenics. 2005;45(10):670.

    Article  CAS  Google Scholar 

  6. Goyal A, Norton DP, Budai JD, Paranthaman M, Specht ED, Kroeger DM, Lee DF. High critical current density superconducting tapes by epitaxial deposition of YBa2Cu3O7-x thick films on biaxially textured metals. Appl Phys Lett. 1996;69(12):1795.

    Article  CAS  Google Scholar 

  7. Usoskin A, Dzick J, Issaev A, Knoke J, Moreno FG, Sturm K, Freyhardt HC. Critical currents in long-length YBCO-coated conductors. Supercond Sci Technol. 2001;14(9):676.

    Article  CAS  Google Scholar 

  8. Majkic G, Mensah RJ, Selvamanickam V, Xie YY, Salama K. Electromechanical behavior of IBAD/MOCVD YBCO coated conductors subjected to torsion and tension loading. IEEE Trans Appl Supercond. 2009;19(3):3003.

    Article  CAS  Google Scholar 

  9. Oomen MP, Herkert W, Bayer D, Kummeth P, Nick W, Arndt T. Manufacturing and test of 2G-HTS coils for rotating machines: challenges, conductor requirements, realization. Phys C: Supercond Appl. 2012;482:111.

    Article  CAS  Google Scholar 

  10. Mendoza E, Puig T, Varesi E, Carrillo A, Plain J, Obradors X. Critical current enhancement in YBCO–Ag melt-textured composites: influence of microcrack density. Phys C: Supercond Appl. 2000;334(1):7.

    Article  CAS  Google Scholar 

  11. Van der Laan DC, Ekin JW, Clickner CC, Stauffer TC. Delamination strength of YBCO coated conductors under transverse tensile stress. Supercond Sci Technol. 2007;20(8):765.

    Article  CAS  Google Scholar 

  12. Ibi A, Iwai H, Takahashi K, Muroga T, Miyata S, Watanabe T, Yamada Y, Shiohara Y. Investigations of thick YBCO coated conductor with high critical current using IBAD-PLD method. Physica C (Amsterdam, Neth). 2005;426:910.

    Article  Google Scholar 

  13. Durrell JH, Rutter NA. Importance of low-angle grain boundaries in YBa2Cu3O7−δ coated conductors. Supercond Sci Technol. 2008;22(1):013001.

    Article  Google Scholar 

  14. Shin HS, Kim KH, Dizon JRC, Kim TY, Ko RK, Oh SS. The strain effect on critical current in YBCO coated conductors with different stabilizing layers. Supercond Sci Technol. 2005;18(12):S364.

    Article  CAS  Google Scholar 

  15. Takematsu T, Hu R, Takao T, Yanagisawa Y, Nakagome H, Uglietti D, Kiyoshi T, Takahashi M, Maeda H. Degradation of the performance of a YBCO-coated conductor double pancake coil due to epoxy impregnation. Phys C: Supercond Appl. 2010;470(17):674.

    Article  CAS  Google Scholar 

  16. Iijima Y, Tanabe N, Ikeno Y, Kohno O. Biaxially aligned YBa2Cu3O7−x thin film tapes. Phys C: Supercond Appl. 1991;185:1959.

    Article  Google Scholar 

  17. Ko KP, Moon SH, Park C, Yoo SI. High Jc GdBa2Cu3O7-xcoated conductors on CeO2-buffered IBAD MgO template fabricated by pulsed laser deposition. IEEE Trans Appl Supercond. 2011;21:2965.

    Article  CAS  Google Scholar 

  18. Groves JR, Arendt PN, Kung H, Foltyn SR, Depaula RF, Emmert LA. Texture development in IBAD MgO films as a function of deposition thickness and rate. IEEE Trans Appl Supercond. 2001;11(1):2822.

    Article  Google Scholar 

  19. Dong YB, Du M, Liu XP, Hao L. Thermal stability of AlON/TiAlOND/TiAlONM/Cu solar selective coating at high temperature under vacuum. Chin J Rare Met. 2016;40(9):896.

    Google Scholar 

  20. Wang CP, Do KB, Beasley MR, Geballe TH, Hammond RH. Deposition of in-plane textured MgO on amorphous Si3N4 substrates by ion-beam-assisted deposition and comparisons with ion-beam-assisted deposited yttria-stabilized-zirconia. Appl Phys Lett. 1997;71(20):2955.

    Article  CAS  Google Scholar 

  21. Arendt PN, Foltyn SR. Biaxially textured IBAD-MgO templates for YBCO-coated conductors. MRS Bull. 2004;29(8):543.

    Article  CAS  Google Scholar 

  22. Paranthaman MP, Aytug T, Stan L, Jia Q, Cantoni C, Wee SH. Chemical solution derived planarization layers for highly aligned IBAD-MgO templates. Supercond Sci Technol. 2014;27(2):022002.

    Article  CAS  Google Scholar 

  23. Sheehan C, Jung Y, Holesinger T, Feldmann DM, Edney C, Ihlefeld JF, Clem PG, Matias V. Solution deposition planarization of long-length flexible substrates. Appl Phys Lett. 2011;98(7):071907.

    Article  Google Scholar 

  24. Feng ZP, Wei F, Zhao HB, Yang ZM. Electrochromic behavior of WO3 thin films prepared by radio frequency magnetron sputtering. Chin J Rare Met. 2016;40(9):902.

    Google Scholar 

  25. Xue Y, Zhang YH, Zhang F, Zhao RP, Wang H, Xiong J. Growth of simplified buffer template on flexible metallic substrates for YBa2Cu3O7−δ coated conductors. J Alloy Compd. 2016;673:47.

    Article  CAS  Google Scholar 

  26. Xue Y, Xiong J, Zhang Y, Zhang F, Zhao RP, Hui W, Wang Q, Cheng G, Zhao XH, Tao BW. Reel-to-reel deposition of epitaxial double-sided MgO buffer layers for coated conductors. Phys C: Supercond Appl. 2016;525:5.

    Article  Google Scholar 

  27. Hartman JW, Brewer RT, Atwater HA. Reflection high-energy electron diffraction experimental analysis of polycrystalline MgO films with grain size and orientation distributions. J Appl Phys. 2003;93(1):205.

    Article  Google Scholar 

  28. Usov IO, Arendt PN, Sickafus KE. Relationship between radiation damage anisotropy in MgO and YSZ single crystals and the Ion/Atom ratio deposition parameter in biaxially-textured MgO and YSZ thin films fabricated by ion beam assisted deposition. Nucl Instrum Methods Phys Res, Sect B. 2010;268(6):622.

    Article  CAS  Google Scholar 

  29. Luo Q, Liu LF, Xiao GN, Li YJ. Effect of the O2/Ar pressure ratio on the microstructure and surface morphology of Epi-MgO/IBAD-MgO templates for GdBa2Cu3O7−δ coated conductors. Chin Phys Lett. 2014;31(3):037402.

    Article  Google Scholar 

  30. Xiao G, Liu L, Xu D, Wu X, Luo Q, Li Y. Influence of assisting ion beam current on the microstructure and surface morphology of IBAD-MgO thin films for YBCO coated conductors. Surf Coat Technol. 2014;252:108.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This study was financially supported by the National High Technology Research and Development Program of China (No. 2014AA032702).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Bo-Wan Tao.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Tang, H., Ma, YC., Zhao, RP. et al. Preparation of double-sided biaxially textured magnesium oxide thin films. Rare Met. 42, 2075–2080 (2023). https://doi.org/10.1007/s12598-018-1155-2

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12598-018-1155-2

Keywords

Navigation