Skip to main content
Log in

Fabrication of Schiff’s base-functionalized porous carbon materials for the effective removal of toxic metals from wastewater

  • Original Paper
  • Published:
Arabian Journal of Geosciences Aims and scope Submit manuscript

Abstract

The development of adsorbents for water treatment applications is an important strategy for removing hazardous materials from wastewater effluent. In this regard, an efficient adsorbent was prepared based on a combination of N′-(2-phenylacetyl) thiophene-2-carbohydrazide and low-cost porous activated carbon with 5 and 10% Schiff’s base with the aim of enhancing the efficiency of metal adsorption by the carbon. The Schiff’s base-modified carbon was characterized by SEM, EDS, XRD surface area, and FTIR. In addition, the Schiff base-modified carbon was applied for water treatment. The water samples were collected from Riyadh, Dammam, and places near industrial zones. SEM showed the porous structure of the prepared adsorbent even after modification with Schiff’s base at the two tested ratios (5% and 10%). The removal of mercury(II), lead(II), cadmium(II), and aluminum(III) from aqueous solution was evaluated. In addition, the effects of pH and contact time were investigated. Furthermore, kinetic models were applied. The optimal conditions for the removal of mercury(II), lead(II), cadmium(II), and aluminum(III) by N′-(2-phenylacetyl) thiophene-2-carbohydrazide-modified carbon were pH 6 and a contact time of 60 min. The adsorption capacities were 86.7, 70.3, 71.36, and 88.5 mg/g for mercury(II), lead(II), cadmium(II), and aluminum(III), respectively. Based on the adsorption kinetic models, the process followed a second-order kinetic model, which confirms the fast uptake of metals from the solutions. The removal efficiencies of mercury(II), lead(II), cadmium(II), and aluminum(III) from real wastewater samples were at least 90% in most of the tested real wastewater samples.

Graphical abstract

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Figure 6.
Fig. 7
Fig. 8

Similar content being viewed by others

References

Download references

Acknowledgments

The authors acknowledge King AbdulAziz City for Science and Technology for supporting this research work through the small grant program “Project Grant No. 37 – 163”.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Mohamed Habila.

Ethics declarations

Conflict of Interest

The author(s) declare that there is no conflict of interest.

Additional information

Responsible Editor: Amjad Kallel

Supplementary Information

ESM 1

(PDF 696 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Al-Marghany, A., Badjah Hadj Ahmed, A.Y., AlOthman, Z.A. et al. Fabrication of Schiff’s base-functionalized porous carbon materials for the effective removal of toxic metals from wastewater. Arab J Geosci 14, 336 (2021). https://doi.org/10.1007/s12517-021-06667-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s12517-021-06667-6

Keywords

Navigation