Skip to main content
SpringerLink
Log in

A correlation between P-wave velocity and Schmidt hardness with mechanical properties of travertine building stones

  • Original Paper
  • Published:
Arabian Journal of Geosciences Aims and scope Submit manuscript

Abstract

As known, P-wave velocity and Schmidt hardness are non-destructive tests, which have been used for many years in geological, geotechnical, and civil engineering as an index tests for a quick assessment of rocks mechanical properties due to its rapidity and easiness, and non-destructiveness. The purpose of this study is to investigate the correlation between P-wave velocity and Schmidt hardness with some of mechanical properties of travertine building stones by empirical equations. Moreover, we have compared the accuracy of P-wave velocity and Schmidt hardness to estimate the mechanical properties of rocks. For this purpose, 15 types of travertine have been collected from various quarries of Iran and tested. The tests include the determination of P-wave velocity and Schmidt hardness, and mechanical properties include the unconfined compressive strength, Brazilian tensile strength, and point load strength. Using data analysis, empirical equations have been developed for estimating the mechanical properties from P-wave velocity and Schmidt hardness. To check the validity of the empirical equations, a t test was performed, which confirmed the validity of the proposed empirical equations. Moreover, the results show that P-wave velocity appears to be more reliable than the Schmidt hardness for estimating the mechanical properties. Consequently, we propose empirical equations avoiding from cumbersome and time consuming tests for determining the mechanical properties of rocks.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13

Similar content being viewed by others

References

  • ASTM (1983) Test methods for ultra violet velocities determination. Designation D2845

  • Andrea DV, Fisher RL, Fogelson DE (1964) Prediction of compression strength from other rock properties. Colo Sch Mines Q 59:623–640

    Google Scholar 

  • Aufmuth RE (1973) A systematic determination of engineering criteria for rock. Bull Assoc Eng Geol 11:235–245

    Google Scholar 

  • Bell FG (1978) The physical and mechanical properties of the fell sandstones, Northumberland, England. Eng Geol 12:1–29

    Article  Google Scholar 

  • Bell FG (1994) A survey of the engineering properties of some anhydrite and gypsum from the north and midlands of England. Eng Geol 38:1–23

    Article  Google Scholar 

  • Bell FG, Lindsay P (1999) The petrographic and geotechnical properties of some sandstone from the newspaper member of the Natal Group near Durban, South Africa. Eng Geol 53:57–81

    Article  Google Scholar 

  • Bieniawski ZT (1975) Point load test in geotechnical practice. Eng Geol 91:1–11

    Article  Google Scholar 

  • Broch E, Franklin JA (1972) Point-load strength test. Int J Rock Mech Min Sci 6:669–697

    Article  Google Scholar 

  • Cargill JS, Shakoor A (1990) Evaluation of empirical methods for measuring the uniaxial compressive strength of rock. Int J Rock Mech Min Sci 27:495–503

    Article  Google Scholar 

  • Cobanoglu I, Celik SB (2008) Estimation of uniaxial compressive strength from point load strength, Schmidt hardness and P-wave velocity. Bull Eng Geol Environ 67:491–498

    Article  Google Scholar 

  • Diamantis K, Bellas S, Migiros G, Gartzos E (2011) Correlating wave velocities with physical, mechanical properties and petrographic characteristics of peridotites from the Central Greece. Geotech Geol Eng 29:1049–1062

    Article  Google Scholar 

  • Haramy KY, DeMarco MJ )1985( Use of Schmidt hammer for rock and coal testing. 26th US Symp. on Rock Mechanics, 26–28 June, pp. 549–555.

  • ISRM (1981) Rock characterization testing and monitoring. In: Brown ET (ed) ISRM suggested methods. Pergamon Press, Oxford

    Google Scholar 

  • Kahraman S (2001) Evaluation of simple methods for assessing the uniaxial compressive strength of rock. Int J Rock Mech Min Sci 38:981–994

    Article  Google Scholar 

  • Kilic A, Teymen A (2008) Determination of mechanical properties of rocks using simple methods. Bull Eng Geol Environ 67:237–244

    Article  Google Scholar 

  • Kurtulus C, Bozkurt A, Endes H (2012) Physical and mechanical properties of serpentinized ultrabasic rocks in NW Turkey. Pure Appl Geophys 169:1205–1215

    Article  Google Scholar 

  • Kurtulus C, Irmak TS, Sertcelik I (2010) Physical and mechanical properties of Gokceada: Imbros (NE Aegean Sea) island andesites. Bull Eng Geol Environ 69:321–324

    Article  Google Scholar 

  • Matula M, Dearman WR, Golodkovskaja GA, Pahl A, Radbruch–Hall DH, Sanejouand R (1979) Classification of rocks and soils for engineering geological mapping. Part 1: rock and soil materials. Bull Eng Geol Environ 19:364–371

    Google Scholar 

  • Reichmuth DR )1968( Point load testing of brittle materials to determine tensile strength, relative brittleness. In: Proceedings of the 9th US Symposium on Rock Mechanics, Golden, pp 134–159

  • Sarkar K, Singh TN (2008) Slope stability study of Himalayan rock—a numerical approach. Int J Earth Sci Eng 1:7–16

    Google Scholar 

  • Sarkar K, Vishal V, Singh TN (2012) An empirical correlation of index geomechanical parameters with the compressional wave velocity. Geotech Geol Eng 30:469–479

    Article  Google Scholar 

  • Sharma PK, Singh TN (2008) A correlation between P-wave velocity, impact strength index, slake durability index and uniaxial compressive strength. Bull Eng Geol Environ 67:17–22

    Article  Google Scholar 

  • Singh RN, Hassani FP, Elkington PAS )1983( The application of strength and deformation index testing to the stability assessment of coal measures excavations. Proceedings of 24th US symposium on rock mechanics, Texas A & M Univ, AEG, pp 599–609

  • Singh TN, Pradhan SP, Vishal V (2011) Stability of slopes in a fire-prone mine in Jharia coalfield, India. Arab J Geosci 6:419–427

    Article  Google Scholar 

  • SPSS 21.0 (2012) Statistical analysis software (Standard Version). SPSS Inc

  • Tugrul A, Zarif IH (1999) Correlation of mineralogical and textural characteristics with engineering properties of selected granitic rocks from Turkey. Eng Geol 51:303–317

    Article  Google Scholar 

  • Yagiz S (2011) P-wave velocity test for the assessment of some geotechnical properties of rock materials. Bull Mater Sci 34:943–957

    Article  Google Scholar 

  • Yasar E, Erdogan Y (2004a) Correlating sound velocity with the density, compressive strength and Young’s modulus of carbonate rocks. Int J Rock Mech Min Sci 41:871–875

    Article  Google Scholar 

  • Yasar E, Erdogan Y (2004b) Estimation of rock physicomechanical properties using hardness methods. Eng Geol 71:281–288

    Article  Google Scholar 

  • Yilmaz I, Sendir H (2002) Correlation of Schmidt hammer rebound number with unconfined compressive strength and Young’s modulus in gypsum from Sivas (Turkey). Eng Geol 66:211–219

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Lorestan University, Khorramabad, Iran

    Amin Jamshidi, Reza Zarei Sahamieh & Yasin Abdi

  2. Tarbiat Modares University, Tehran, Iran

    Mohammad Reza Nikudel & Mashallah Khamehchiyan

Authors
  1. Amin Jamshidi
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Mohammad Reza Nikudel
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Mashallah Khamehchiyan
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Reza Zarei Sahamieh
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Yasin Abdi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Mohammad Reza Nikudel.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Jamshidi, A., Nikudel, M.R., Khamehchiyan, M. et al. A correlation between P-wave velocity and Schmidt hardness with mechanical properties of travertine building stones. Arab J Geosci 9, 568 (2016). https://doi.org/10.1007/s12517-016-2542-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s12517-016-2542-3

Keywords

Search

Navigation