Abstract
In the present article, the flow field and passive gaseous pollutant dispersion in a naturally cross-ventilated isolated single-zone model building have been investigated. The large eddy simulation (LES) approach has been applied together with three different sub-grid scale (SGS) models, namely, wall-adapting local eddy-viscosity (WALE), dynamic Smagorinsky-Lilly model (DSLM), and standard Smagorinsky-Lilly model (SSLM). The flow and passive scalar concentration fields have been compared with available experimental data. It is demonstrated that the three SGS models predict similar flow field. Also, it can be observed that the mean concentration field results obtained from the WALE sub-grid scale (SGS) model are in better agreement with the experimental data than those of DSLM and SSLM by about 8% and 5%, respectively. Moreover, the CPU time required for the computations by the WALE and SSLM models was almost 20% less than that of DSLM, making WALE a more suitable SGS model than the other two models for the prediction of flow and concentration fields in an isolated building. Furthermore, contributions of convective flux and turbulent diffusion flux to the pollutant transportation have been studied. It has been shown that although the convective flux is the main mechanism, the two fluxes have a significant influence on pollutant transportation and distribution.
Similar content being viewed by others
References
Ai ZT, Mak CM (2015). Large-eddy Simulation of flow and dispersion around an isolated building: Analysis of influencing factors. Computers and Fluids, 118: 89–100.
Bazdidi-Tehrani F, Ghafouri A, Jadidi M (2013). Grid resolution assessment in large eddy simulation of dispersion around an isolated cubic building. Journal of Wind Engineering and Industrial Aerodynamics, 121: 1–15.
Bazdidi-Tehrani F, Jadidi M (2014). Large eddy simulation of dispersion around an isolated cubic building: Evaluation of localized dynamic kSGS-equation sub-grid scale model. Environmental Fluid Mechanics, 14: 565–589.
Bazdidi-Tehrani F, Mohammadi-Ahmar A, Kiamansouri M (2014). Analysis of various non-linear k-e models accuracy to predict flow field and pollutant dispersion around a model building. Modares Mechanical Engineering, 14 (6): 165–174.
Bazdidi-Tehrani F, Mohammadi-Ahmar A, Kiamansouri M, Jadidi M (2015). Investigation of various non-linear eddy viscosity turbulence models for simulating flow and pollutant dispersion on and around a cubical model building. Building Simulation, 8: 149–166.
Bazdidi-Tehrani F, Kiamansouri M, Jadidi M (2016). Inflow turbulence generation techniques for large eddy simulation of flow and dispersion around a model building in a turbulent atmospheric boundary layer. Journal of Building Performance Simulation, 9: 680–698.
Bazdidi-Tehrani F, Badaghi D, Kiamansouri M, Jadidi M (2017). Analysis of various inflow turbulence generation methods in large eddy simulation approach for prediction of pollutant dispersion around model buildings. Journal of Computational Methods in Engineering, 35: 85–112.
Bazdidi-Tehrani F, Gholamalipour P, Kiamansouri M, Jadidi M (2019). Large eddy simulation of thermal stratification effect on convective and turbulent diffusion fluxes concerning gaseous pollutant dispersion around a high-rise model building. Journal of Building Performance Simulation, 12: 97–116.
Ben-Nasr O, Hadjadj A, Chaudhuri A, Shadloo MS (2017). Assessment of subgrid-scale modeling for large-eddy simulation of a spatially-evolving compressible turbulent boundary layer. Computers and Fluids, 151: 144–158.
Blocken B (2014). 50 years of Computational Wind Engineering: Past, present and future. Journal of Wind Engineering and Industrial Aerodynamics, 129: 69–102.
Blocken B (2015). Computational Fluid Dynamics for urban physics: Importance, scales, possibilities, limitations and ten tips and tricks towards accurate and reliable simulations. Building and Environment, 91: 219–245.
Blocken B (2018). LES over RANS in building simulation for outdoor and indoor applications: A foregone conclusion? Building Simulation, 11: 821–870.
Chang TJ (2002). Numerical evaluation of the effect of traffic pollution on indoor air quality of a naturally ventilated building. Journal of the Air and Waste Management Association, 52: 1043–1053.
Cheung JOP, Liu CH (2011). CFD simulations of natural ventilation behaviour in high-rise buildings in regular and staggered arrangements at various spacings. Energy and Buildings, 43: 1149–1158.
Dai Y, Mak CM, Ai Z, Hang J (2018). Evaluation of computational and physical parameters influencing CFD simulations of pollutant dispersion in building arrays. Building and Environment, 137: 90–107.
Davidson L (2018). Fluid Mechanics, Turbulent Flow and Turbulence Modeling. Goteborg, Sweden: Chalmers University of Technology.
Davidson L (2011). How to estimate the resolution of an LES of recirculating flow. In: Salvetti M, Geurts B, Meyers J, Sagaut P (eds), Quality and Reliability of Large-Eddy Simulations II. Dordrecht, Netherlands: Springer. vol 16, pp. 269–286.
Deng X, Cooper P, Ma Z, Kokogiannakis G (2017). Numerical analysis of indoor thermal comfort in a cross-ventilated space with top-hung windows. Energy Procedia, 121: 222–229.
Ducros F, Nicoud F, Poinsot T (1998). Wall-adapting local eddy-viscosity models for simulations in complex geometries. Paper presented at the 16th Conference on Numerical Methods in Fluid Dynamics, Arcachon, France.
Emmerich S, Dols W, Axley J (2001). Natural Ventilation Review and Plan for Design and Analysis Tools. National Institute of Standards and Technology, US Department of Commerce.
Franke J, Hellsten A, Schlünzen KH, Carissimo B (2011). The COST 732 Best Practice Guideline for CFD simulation of flows in the urban environment: A suggary. International Journal of Environment and Pollution, 44: 419–427.
Germano M, Piomelli U, Moin P, Cabot WH (1991). A dynamic subgrid-scale eddy viscosity model. Physics of Fluids A: Fluid Dynamics, 3: 1760–1765.
Gousseau P, Blocken B, Van Heijst GJF (2013). Quality assessment of Large-Eddy Simulation of wind flow around a high-rise building: Validation and solution verification. Computers and Fluids, 79: 120–133.
Gousseau P, Blocken B, Stathopoulos T, van Heijst GJF (2015). Nearfield pollutant dispersion in an actual urban area: Analysis of the mass transport mechanism by high-resolution Large Eddy Simulations. Computers and Fluids, 114: 151–162.
Hawendi S, Gao S (2017a). Impact of an external boundary wall on indoor flow field and natural cross-ventilation in an isolated family house using numerical simulations. Journal of Building Engineering, 10: 109–123.
Hawendi S, Gao S (2017b). Impact of windward inlet-opening positions on fluctuation characteristics of wind-driven natural cross ventilation in an isolated house using LES. International Journal of Ventilation, 17: 93–119.
Hinze JO (1975). Turbulence. New York: McGraw-Hill.
Jadidi M, Bazdidi-Tehrani F, Kiamansouri M (2016a). Embedded large eddy simulation approach for pollutant dispersion around a model building in atmospheric boundary layer. Environmental Fluid Mechanics, 16: 575–601.
Jadidi M, Bazdidi-Tehrani F, Kiamansouri M (2016b). Dynamic sub-grid scale turbulent Schmidt number approach in large eddy simulation of dispersion around an isolated cubical building. Building Simulation, 9: 183–200.
Jadidi M, Bazdidi-Tehrani F, Kiamansouri M (2018). Scale-adaptive simulation of unsteady flow and dispersion around a model building: spectral and POD analyses. Journal of Building Performance Simulation, 11: 241–260.
Ji L, Tan H, Kato S, Bu Z, Takahashi T (2011). Wind tunnel investigation on influence of fluctuating wind direction on cross natural ventilation. Building and Environment, 46: 2490–2499.
Jiang G, Yoshie R, Shirasawa T, Jin X (2012). Inflow turbulence generation for large eddy simulation in non-isothermal boundary layers. Journal of Wind Engineering and Industrial Aerodynamics, 104–106: 369–378.
Jiang G, Yoshie R (2018). Large-eddy simulation of flow and pollutant dispersion in a 3D urban street model located in an unstable boundary layer. Building and Environment, 142: 47–57.
Karava P, Stathopoulos T, Athienitis AK (2011). Airflow assessment in cross-ventilated buildings with operable façade elements. Building and Environment, 46: 266–279.
Kikumoto H, Ooka R (2018). Large-eddy simulation of pollutant dispersion in a cavity at fine grid resolutions. Building and Environment, 127: 127–137.
Li XX, Liu CH, Leung DYC, Lam KM (2006). Recent progress in CFD modelling of wind field and pollutant transport in street canyons. Atmospheric Environment, 40: 5640–5658.
Lilly DK (1992). A proposed modification of the Germano subgrid-scale closure method. Physics of Fluids A: Fluid Dynamics, 4: 633–635.
Lo LJ, Novoselac A (2013). Effect of indoor buoyancy flow on wind-driven cross ventilation. Building Simulation, 6: 69–79.
Ma XY, Peng Y, Zhao FY, Liu CW, Mei SJ (2017). Full numerical investigations on the wind driven natural ventilation: Cross ventilation and single-sided ventilation. Procedia Engineering, 205: 3797–3803.
Merlier L, Jacob J, Sagaut P (2018). Lattice-Boltzmann Large-Eddy Simulation of pollutant dispersion in street canyons including tree planting effects. Atmospheric Environment, 195: 89–103.
Meroney RN, Leitl BM, Rafailidis S, Schatzmann M (1999). Windtunnel and numerical modeling of flow and dispersion about several building shapes. Journal of Wind Engineering and Industrial Aerodynamics, 81: 333–345.
Meroney RN (2009). CFD prediction of airflow in buildings for natural ventilation. Paper presented at the 11th Americas Conference on Wind Engineering, San Juan, Puerto Rico.
Mohammadi-Ahmar A, Bazdidi-Tehrani F, Solati A, Kiamansouri M, Jadidi M (2017). Flow and contaminant dispersion analysis around a model building using non-linear eddy viscosity model and large eddy simulation. International Journal of Environmental Science and Technology, 14: 957–972.
Montazeri H, Montazeri F (2018). CFD simulation of cross-ventilation in buildings using rooftop wind-catchers: Impact of outlet openings. Renewable Energy, 118: 502–520.
Nicoud F, Ducros F (1999). Subgrid-scale stress modelling based on the square of the velocity gradient tensor. Flow, Turbulence and Combustion, 62: 183–200.
Perén JI, van Hooff T, Leite BCC, Blocken B (2015). CFD analysis of cross-ventilation of a generic isolated building with asymmetric opening positions: Impact of roof angle and opening location. Building and Environment, 85: 263–276.
Pope SB (2000). Turbulent Flows. Cambridge, UK: Cambridge University Press.
Ramponi R, Blocken B (2012). CFD simulation of cross-ventilation flow for different isolated building configurations: Validation with wind tunnel measurements and analysis of physical and numerical diffusion effects. Journal of Wind Engineering and Industrial Aerodynamics, 104–106: 408–418.
Sagaut P (2006). Large Eddy Simulation for Incompressible Flows: An Introduction. Berlin: Springer.
Shirzadi M, Mirzaei PA, Naghashzadegan M, Tominaga Y (2018). Modelling enhancement of cross-ventilation in sheltered buildings using stochastic optimization. International Journal of Heat and Mass Transfer, 118: 758–772.
Sini JF, Anquetin S, Mestayer PG (1996). Pollutant dispersion and thermal effects in urban street canyons. Atmospheric Environment, 30: 2659–2677.
Smagorinsky J (1963). General circulation experiments with the primitive equations. Monthly Weather Review, 91: 99–164.
Stoll R, Porté-Agel F (2006). Dynamic subgrid-scale models for momentum and scalar fluxes in large-eddy simulations of neutrally stratified atmospheric boundary layers over heterogeneous terrain. Water Resources Research, 42: 1–18.
Tominaga Y, Mochida A, Murakami S, Sawaki S (2008a). Comparison of various revised k-e models and LES applied to flow around a high-rise building model with 1:1:2 shape placed within the surface boundary layer. Journal of Wind Engineering and Industrial Aerodynamics, 96: 389–411.
Tominaga Y, Mochida A, Yoshie R, Kataoka H, Nozu T, Yoshikawa M, Shirasawa T (2008b). AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings. Journal of Wind Engineering and Industrial Aerodynamics, 96: 1749–1761.
Tominaga Y, Stathopoulos T (2010). Numerical simulation of dispersion around an isolated cubic building: Model evaluation of RANS and LES. Building and Environment, 45: 2231–2239.
Tominaga Y, Stathopoulos T (2011). CFD modeling of pollution dispersion in a street canyon: Comparison between LES and RANS. Journal of Wind Engineering and Industrial Aerodynamics, 99: 340–348.
Tominaga Y, Stathopoulos T (2012). CFD Modeling of pollution dispersion in building array: Evaluation of turbulent scalar flux modeling in RANS model using LES results. Journal of Wind Engineering and Industrial Aerodynamics, 104–106: 484–491.
Tominaga Y, Blocken B (2016). Wind tunnel analysis of flow and dispersion in cross-ventilated isolated buildings: Impact of opening positions. Journal of Wind Engineering and Industrial Aerodynamics, 155: 74–88.
Tominaga Y, Stathopoulos T (2017). Steady and unsteady RANS simulations of pollutant dispersion around isolated cubical buildings: Effect of large-scale fluctuations on the concentration field. Journal of Wind Engineering and Industrial Aerodynamics, 165: 23–33.
Tominaga Y, Stathopoulos T (2018). CFD simulations of near-field pollutant dispersion with different plume buoyancies. Building and Environment, 131: 128–139.
van Hooff T, Blocken B (2010). Coupled urban wind flow and indoor natural ventilation modelling on a high-resolution grid: A case study for the Amsterdam ArenA stadium. Environmental Modelling and Software, 25: 51–65.
van Hooff T, Blocken B (2013). CFD evaluation of natural ventilation of indoor environments by the concentration decay method: CO2 gas dispersion from a semi-enclosed stadium. Building and Environment, 61: 1–17.
van Hooff T, Blocken B, Tominaga Y (2017). On the accuracy of CFD simulations of cross-ventilation flows for a generic isolated building: Comparison of RANS, LES and experiments. Building and Environment, 114: 148–165.
Vasaturo R, Kalkman I, Blocken B, van Wesemael PJV (2018). Large eddy simulation of the neutral atmospheric boundary layer: performance evaluation of three inflow methods for terrains with different roughness. Journal of Wind Engineering and Industrial Aerodynamics, 173: 241–261.
Versteeg HK, Malalasekera W (2007). An Introduction to Computational Fluid Dynamics: The Finite Volume MethodHarlow, UK: Pearson Education.
Werner H, Wengle H (1993). Large-eddy simulation of turbulent flow over and around a cube in a plate channel. In: Durst F, Friedrich R, Launder BE, Schmidt FW, Schumann U, Whitelaw JH (eds), Turbulent Shear Flows 8. Berlin: Springer.
Xia Q, Niu J, Liu X (2014). Dispersion of air pollutants around buildings: A review of past studies and their methodologies. Indoor and Built Environment, 23: 201–224.
Yoshie R, Jiang G, Shirasawa T, Chung J (2011). CFD simulations of gas dispersion around high-rise building in non-isothermal boundary layer. Journal of Wind Engineering and Industrial Aerodynamics, 99: 279–288.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bazdidi-Tehrani, F., Masoumi-Verki, S., Gholamalipour, P. et al. Large eddy simulation of pollutant dispersion in a naturally cross-ventilated model building: Comparison between sub-grid scale models. Build. Simul. 12, 921–941 (2019). https://doi.org/10.1007/s12273-019-0525-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12273-019-0525-5