Skip to main content
SpringerLink
Log in

Thermal interaction of a circular plate-ring structure using digital image correlation technique and infrared heating system

  • Published:
Journal of Mechanical Science and Technology Aims and scope Submit manuscript

Abstract

During the high speed flight of vehicles, the thermal behavior and interactions of structures in a high-temperature environment are important for thermal-structural design. In this research, the thermal interaction behavior of a circular aluminum plate inside a stainless steel ring was investigated at temperature up to 550°C using a non-contact and full-field high-temperature deformation measurement method. This study uses an infrared radiation heating system to create a high-temperature operation environment. The techniques were developed and implemented in a radiation heating facility, enabling non-contact displacement, strain measurements through Digital image correlation (DIC) technique. The images of the structure surface due to thermal load at various temperatures were recorded with Chargedcoupled device cameras. Afterwards, full-field thermal deformation of the sample was determined with DIC technique. Finally, finite element analysis was used to calculate high-temperature deformation of the circular plate-ring structure. The results of the experiment were close to the simulation results. In addition, the process of both heating-up and cooling-down was also considered to examine the recoverable characteristic of the structure. The results show the efficacy of DIC in achieving such measurements at high-temperatures.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. E. A. Thornton, Thermal Structures for Aerospace Application, American Institute of Aeronautics and Astronautics (1996).

    Book  Google Scholar 

  2. M. Anwander, B. G. Zagar, B. Weiss and H. Weiss, Noncontacting strain measurements at high temperatures by the digital laser speckle technique, Experimental Mechanics, 40 (1) (2000) 98–105.

    Article  Google Scholar 

  3. R. Völkl, B. Fischer, M. Beschliesser and U. Glatzel, Evaluating strength at ultra-high temperatures—Methods and results, Materials Science and Engineering: A, 483-484 (2008) 587–589.

    Article  Google Scholar 

  4. W. Bian, Z. Wang, J. Yuan and W. Xu, Thermo-mechanical analysis of angular contact ball bearing, J. of Mechanical Science and Technology, 30 (1) (2016) 297–306.

    Article  Google Scholar 

  5. C. S. Vikram and H. A. McKinstry, A laser speckle method for measuring ultra-low thermal expansion, Optics and Lasers in Engineering, 6 (2) (1985) 91–100.

    Article  Google Scholar 

  6. V. L. Solozhenko and T. Peun, Compression and thermal expansion of hexagonal graphite-like boron nitride up to 7 GPa and 1800 K, J. of Physics and Chemistry of Solids, 58 (9) (1997) 1321–1323.

    Article  Google Scholar 

  7. C. Dudescu, J. Naumann, M. Stockmann and S. Nebel, Characterisation of thermal expansion coefficient of anisotropic materials by electronic speckle pattern interferometry, Strain, 42 (3) (2006) 197–205.

    Article  Google Scholar 

  8. X. Chen, N. Xu, L. Yang and D. Xiang, High temperature displacement and strain measurement using a monochromatic light illuminated stereo digital image correlation system, Measurement Science and Technology, 23 (12) (2012) 125603.

    Article  Google Scholar 

  9. J. S. Lyons, J. Liu and M. A. Sutton, High-temperature deformation measurements using digital-image correlation, Experimental Mechanics, 36 (1) (1996) 64–70.

    Article  Google Scholar 

  10. B. Pan, D. Wu and J. Gao, High-temperature strain measurement using active imaging digital image correlation and infrared radiation heating, Journal of Strain Analysis for Engineering Design (2013).

    Google Scholar 

  11. T. Jin, N. S. Ha, V. T. Le, N. S. Goo and H. C. Jeon, Thermal buckling measurement of a laminated composite plate under a uniform temperature distribution using the digital image correlation method, Composite Structures, 123 (2015) 420–429.

    Article  Google Scholar 

  12. T. L. Jin, N. S. Ha and N. S. Goo, A study of the thermal buckling behavior of a circular aluminum plate using the digital image correlation technique and finite element analysis, Thin-Walled Structures, 77 (2014) 187–197.

    Article  Google Scholar 

  13. T. L. Jin, S. H. Lee and N. S. Goo, Thermal stress measurement of a double ring structure using digital image correlation method, Experimental Techniques (2013).

    Google Scholar 

  14. R. Montanini and F. Freni, Non-contact measurement of linear thermal expansion coefficients of solid materials by infrared image correlation, Measurement Science and Technology, 25 (1) (2014) 015013.

    Article  Google Scholar 

  15. B. Pan, D. Wu and Z. Wang, Internal displacement and strain measurement using digital volume correlation: a least-squares framework, Measurement Science and Technology, 23 (4) (2012) 045002.

    Article  MathSciNet  Google Scholar 

  16. X. Yang, Z. Liu and H. Xie, A real time deformation evaluation method for surface and interface of thermal barrier coatings during 1100°C thermal shock, Measurement Science and Technology, 23 (2012) 105604.

    Article  Google Scholar 

  17. B. M. B. Grant, H. J. Stone, P. J. Withers and M. Preuss, High-temperature strain field measurement using digital image correlation, J. of Strain Analysis for Engineering Design, 44 (4) (2009) 263–271.

    Article  Google Scholar 

  18. R. B. Berke and J. Lambros, Ultraviolet digital image correlation (UV-DIC) for high temperature applications, Review of Scientific Instruments, 85 (4) (2014) 045121.

    Article  Google Scholar 

  19. S.-F. Hwang and W.-J. Wu, Deformation measurement around a high strain-gradient region using a digital image correlation method, J. of Mechanical Science and Technology, 26 (10) (2012) 3169–3175.

    Article  Google Scholar 

  20. S.-F. Hwang, M.-C. Shen and B.-B. Hsu, Strain measurement of polymer materials by digital image correlation combined with finite-element analysis, J. of Mechanical Science and Technology, 29 (10) (2015) 4189–4195.

    Article  Google Scholar 

  21. N. S. Ha, T. L. Jin, N. S. Goo and H. C. Park, Anisotropy and non-homogeneity of an Allomyrina Dichotoma beetle hind wing membrane, Bioinspiration & Biomimetics, 6 (4) (2011) 046003.

    Article  Google Scholar 

  22. N. S. Ha, T. Jin and N. S. Goo, Modal analysis of an artificial wing mimicking an Allomyrina dichotoma beetle’s hind wing for flapping-wing micro air vehicles by noncontact measurement techniques, Optics and Lasers in Engineering, 51 (5) (2013) 560–570.

    Article  Google Scholar 

  23. N. Ha, H. Vang and N. Goo, Modal analysis using digital image correlation technique: An application to artificial wing mimicking Beetle’s hind wing, Experimental Mechanics, 55 (5) (2015) 989–998.

    Article  Google Scholar 

  24. K. Hayat and S. K. Ha, Non-contact measurement of the coefficient of thermal expansion of Al 6061-T6 with fiber Bragg grating sensors, J. of Mechanical Science and Technology, 28 (2) (2014) 621–626.

    Article  Google Scholar 

  25. ARAMIS User Manual-Software: ARAMIS v6.3 and higher, GOM-Optical Measuring Techniques, Germany (2011).

  26. B. Swaminathan, J. Lambros and H. Sehitoglu, Digital image correlation study of mechanical response of nickel superalloy Hastelloy X under thermal and mechanical cycling: Uniaxial and biaxial stress states, J. of Strain Analysis for Engineering Design, 49 (4) (2014) 233–243.

    Article  Google Scholar 

  27. B. Swaminathan, W. Abuzaid, H. Sehitoglu and J. Lambros, Investigation using digital image correlation of Portevin-Le Chatelier Effect in Hastelloy X under thermomechanical loading, International J. of Plasticity, 64 (2015) 177–192.

    Article  Google Scholar 

  28. Y. Dong, H. Kakisawa and Y. Kagawa, Development of microscale pattern for digital image correlation up to 1400°C, Optics and Lasers in Engineering, 68 (2015) 7–15.

    Article  Google Scholar 

  29. A. Nyilas, Thermal contraction measurements of various materials using high resolution extensometers between 290 K and 7 K, AIP Conference Proceedings, 711 (1) (2004) 151–158.

    Article  Google Scholar 

  30. G. Isgrò, C. J. Kleverlaan, H. Wang and A. J. Feilzer, The influence of multiple firing on thermal contraction of ceramic materials used for the fabrication of layered allceramic dental restorations, Dental Materials, 21 (6) (2005) 557–564.

    Article  Google Scholar 

  31. S. Nakahara, S. Nishida, S. Hisada and T. Fujita, Thermal contraction coefficient measurement technique of several materials at low temperatures using electronic speckle pattern interferometry, Advances in Cryogenic Engineering Materials, U. B. Balachandran, D. Gubser, K. T. Hartwig, R. Reed, W. Warnes and V. Bardos (Eds), Springer US (1998) 359–366.

    Chapter  Google Scholar 

  32. H. Mehrara, D. Eskin, R. Petrov, M. Lalpoor and L. Katgerman, Linear contraction behavior of low-carbon, lowalloy steels during and after solidification using real-time measurements, Metallurgical and Materials Transactions A, 45 (3) (2014) 1445–1456.

    Article  Google Scholar 

  33. T. Becker, K. Splitthof, T. Siebert and P. Kletting, Error estimations of 3D digital image correlation measurements dantec dynamics GmbH, Germany (2006).

    Google Scholar 

  34. T. Schmidt, J. Tyson and K. Galanulis, Full-field dynamic displacement and strain measurement using advanced 3D image correlation photogrammetry: Part 1, Experimental Techniques, 27 (3) (2003) 47–50.

    Article  Google Scholar 

  35. J. J. L. R. C. Rice, J. Bakuckas and S. Thompson, Metallic Materials Properties Development And Standardization (MMPDS), U.S. Department of Transportation Federal Aviation Administration Office of Aviation Research, WS 20591, USA (2003).

    Google Scholar 

  36. Volume 2 Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM International, ASM Committee (1990).

  37. Elevated temperature physical properties of stainless steels, http://www.bssa.org.uk/topics.php?article=139.

  38. High-Temperature characteristics of stainless steels, American Iron and Steel Institute, Nikel Development Institute, USA.

  39. Product Data Sheet: 304/304L Stainless Steel, http://www.aksteel.com/pdf/markets_products/stainless/austenitic/304_304l _data_sheet.pdf, 2007.

Download references

Author information

Authors and Affiliations

  1. Smart Microsystem Research Laboratory, Department of Advanced Technology Fusion, Division of Interdisciplinary Studies, Konkuk University, 120 Neungdong-ro, Gwangjin-gu, Seoul, 143-701, Korea

    Vinh Tung Le, Ngoc San Ha, Tailie Jin & Nam Seo Goo

  2. Agency for Defense Development, The 1st R&D institute-2, Yuseong P.O. Box 35, Daejeon, 305-600, Korea

    Jae Young Kim

Authors
  1. Vinh Tung Le
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ngoc San Ha
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Tailie Jin
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Nam Seo Goo
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Jae Young Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Nam Seo Goo.

Additional information

Recommended by Associate Editor Chang Yong Park

Vinh Tung Le received his B.S. in Aeronautics from Department of Aerospace Engineering of Ho Chi Minh City University of Technology, Vietnam in 2013, and M.S. in Department of Advanced Technology Fusion, Konkuk University, South Korea in 2015. He is currently a Ph.D. student at Konkuk University. He is researching heat transfer phenomena in thermal protection systems.

Ngoc San Ha graduated from Aeronautical Engineering of Ho Chi Minh City University of Technology, Viet Nam, 2008, and got the Ph.D. from Department of Advanced Technology Fusion, Konkuk University, Korea, 2014. Currently, he is a Research Professor at the Department of Advanced Technology Fusion, Konkuk University, Korea. His topics of interest primarily focus on bioinspired composite material, structural dynamics of small systems, material characterization and digital image correlation application.

Tailie Jin received his B.S. in Mechanical Engineering from Yanbian University of Science in 2007. Then, M.S. and Ph.D. in the Department of Advanced Technology Fusion at Konkuk University in 2009 and 2014, respectively. Currently, he is working at OMA Co., Daejeon, Korea. His research interests are thermal deformation measurement using digital image correlation and motion analysis of structures using 3D cameras.

Nam Seo Goo graduated from Department of Aeronautics Engineering of Seoul National University with honors in 1990, and earned M.S. and Ph.D. in Aerospace Engineering at the same university in 1992 and 1996, respectively. He is a Professor in the Department of Advanced Technology Fusion at Konkuk University, Seoul, Korea. His current research interests are structural dynamics of small systems, smart structures and materials and opto-mechanics.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Le, V.T., Ha, N.S., Jin, T. et al. Thermal interaction of a circular plate-ring structure using digital image correlation technique and infrared heating system. J Mech Sci Technol 30, 4363–4372 (2016). https://doi.org/10.1007/s12206-016-0750-0

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12206-016-0750-0

Keywords

Search

Navigation