Abstract
A method for the optimal fiber input power determination is presented by employing the variation characteristics of signal to noise ratio (SNR) in spontaneous Brillouin-scattering-based sensing system. And a heterodyne detection system is constructed for measuring the Brillouin scattering spectra with different fiber input powers. The Brillouin spectrum width and system SNR can be simultaneously measured from these spectra, and the optimal fiber input power can be obtained from such information. In the experiment, for 48.8-km-long standard single-mode fiber (SSMF), the optimal fiber input power values are all approximately 0 dBm obtained by the maximum SNR position for different local oscillator power values and average times.
Similar content being viewed by others
References
G. L. Keaton, M. J. Leonardo, M. W. Byer and D. J. Richard, Optics Express 22, 13351 (2014).
S. M. F. Raupach, A. Koczwara and G. Grosche, Optics Express 22, 26537 (2014).
K. K. Loh, K. S. Yeo, Y. G. Shee, F. R. M. Adikan and M. A. Mahdi, IEEE Photonics Technology Letters 27, 65 (2015).
J. Ogino, S. Miyamoto, T. Matsuyama, K. Sueda, H. Yoshida, K. Tsubakimoto and N. Miyanaga, Applied Physics Express 7, 122702 (2014).
T. Shimizu, K. Nakajima, K. Shiraki, K. Ieda and I. Sankawa, Optical Fiber Technology 14, 10 (2008).
Q. Y. Li, J. L. Gan, Y. Q. Wu, Z. S. Zhang, J. Li and Z. M. Yang, IEEE Photonics Technology Letters 28, 1493 (2016).
T. Shimizu, K. Nakajima, K. Shiraki, K. Ieda and I. Sankawa, Optical Fiber Technology 14, 10 (2008).
R. W. Boyd, K. Rzazewski and P. Narum, Physical Review A 42, 5514 (1990).
Y. Q. Li, X. Zhao, L. J. Zhao, L. Ma, X. J. Li and Q. An, Acta Photonica Sinica, 44, 0319002–1 (2015). (in Chinese)
R. G. Smith, Applied Optics 11, 2489 (1972).
Author information
Authors and Affiliations
Corresponding author
Additional information
This work has been supported by the National Natural Science Foundation of China (No.61377088), and the Natural Science Foundation of Hebei Province of China (Nos.E2015502053 and F2014502098).
Rights and permissions
About this article
Cite this article
Li, Yq., Li, Xj., Fan, Hb. et al. A useful method for determination of optimal fiber input power in spontaneous Brillouin-scattering-based sensing system. Optoelectron. Lett. 14, 53–56 (2018). https://doi.org/10.1007/s11801-018-7216-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11801-018-7216-9