Skip to main content
SpringerLink
Log in

Fatigue Crack Growth and Fracture Studies on Stainless Steel Straight Pipes Having Circumferential Surface Crack

  • Original Research Article
  • Published:
Journal of Failure Analysis and Prevention Aims and scope Submit manuscript

Abstract

The primary objective of this manuscript is to verify the LBB criterion, by carrying out fatigue crack growth (FCG) and fracture tests on SA 312 Type 304LN stainless steel pipes having a part-through crack in the circumferential direction. FCG tests were carried out on pipe specimens under constant amplitude loading in bending till the crack became through-wall and further reached 1/8th of the circumference of the pipe. During the FCG tests, beach marks were introduced by changing the minimum load of the cycle, keeping the maximum load as constant for clear identification of marks on the fracture surface. Subsequent to FCG tests, fracture tests were carried out on the through-wall cracked pipes under displacement control. During the fracture tests, load, load-line displacement, deflection of the pipe at critical locations, Crack Mouth Opening displacement (CMOD), surface crack length (circumferential) and angular rotation of the pipe with respect to the supports were monitored. Stress intensity factor (SIF) was determined by using API Code, RCC-MR and R6 approaches. SIF range and number of cycles predicted using the three analytical approaches are found to be very close to each other with a variation of ± 10% and hence any of the approaches can be used for the prediction of SIF range. Results of the study are helpful in LBB justification and for ensuring the structural integrity of piping components used in the nuclear industry.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21

Similar content being viewed by others

References

  1. Report of USNRC piping review committee, NUREG 1061, vol 3 (USNRC, Washington, 1984)

    Google Scholar 

  2. P. Paris, F. Erdogan, A critical analysis of crack propagation laws. J. Basic Eng. Trans. Am. Soc. Mech. Eng. 85(4), 528–534 (1963). https://doi.org/10.1115/1.3656900

    Article  CAS  Google Scholar 

  3. M. Skorupa, A. Skorupa, Experimental results and predictions on fatigue crack growth in structural steel. Int. J. Fat. 27(8), 1016–1028 (2005). https://doi.org/10.1016/j.ijfatigue.2004.11.011

    Article  CAS  Google Scholar 

  4. S. Kalnaus, F. Fan, Y. Jiang, A.K. Vasudevan, An experimental investigation of fatigue crack growth of stainless steel 304L. Int. J. Fat. 31(5), 840–849 (2009). https://doi.org/10.1016/j.ijfatigue.2008.11.004

    Article  CAS  Google Scholar 

  5. K. Sadananda, A.K. Vasudevan, Fatigue crack growth mechanisms in steel. Int. J. Fat. 25(9–11), 899–914 (2003). https://doi.org/10.1016/S0142-1123(03)00128-2

    Article  CAS  Google Scholar 

  6. C. Vibhor, G. Sasikala, S.K. Ray, S.L. Mannan, B. Raj, Fatigue crack growth mechanism in aged 9Cr-1Mo steel: threshold and Paris regimes. Mat. Sci. Eng. A. 395(1–2), 251–264 (2005). https://doi.org/10.1016/j.msea.2004.12.026

    Article  CAS  Google Scholar 

  7. ASTM E647-15ε1. Standard test methods for measurement of fatigue crack growth rates. ASTM International, USA, (2015)

  8. Rules for inspection and testing of components of light-water-cooled plants, ASME Boiler and Pressure Vessel Code, Section XI, New York, (2019)

  9. R.Y. Bhargava, V. Bhasin, H.S. Kushwaha, Assuring It is safe, Proceedings of International conference on Integrating Structural Integrity, Inspection, Monitoring, Safety and Risk Assessment, Institution of Mechanical Engineers, U.K., (1998)

  10. F.P. Brennan, S.S. Ngiam, An experimental and analytical study of fatigue crack shape control by cold working. Eng. Fract. Mech. 75, 355–363 (2008). https://doi.org/10.1016/j.engfracmech.2007.03.033

    Article  Google Scholar 

  11. P.K. Singh, K.K. Vaze, V. Bhasin, H.S. Kushwaha, P. Gandhi, D.S. Ramachandra Murthy, Crack initiation and growth behaviour of circumferentially cracked pipes under cyclic and monotonic loading. Int. J. Press. Ves. Pip. 80(9), 629–640 (2003). https://doi.org/10.1016/S0308-0161(03)00132-7

    Article  CAS  Google Scholar 

  12. P.K. Singh, K.K. Vaze, A.K. Ghosh, H.S. Kushwaha, D.M. Pukazhendi, D.S.R. Murthy, Crack resistance of austenitic stainless steel pipe and pipe welds with circumferential crack under monotonic loading. Fat. Fract. Eng. Mat. Struct. 29(11), 901–915 (2006). https://doi.org/10.1111/j.1460-2695.2006.01049.x

    Article  CAS  Google Scholar 

  13. P.K. Singh, V. Bhasin, K.K. Vaze, A.K. Ghosh, H.S. Kushwaha, D.S. Ramachandra Murthy, P. Gandhi, Fatigue studies on carbon steel piping material and components: Indian PHWRs. Nucl Eng. Des. 238(4), 801–813 (2008). https://doi.org/10.1016/j.nucengdes.2007.09.002

    Article  CAS  Google Scholar 

  14. Hsua Tzu-Yin, Zhirui Wanga, Fatigue crack initiation at notch root under compressive cyclic loading. Proc. Eng. 2(1), 91–100 (2010). https://doi.org/10.1016/j.proeng.2010.03.010

    Article  Google Scholar 

  15. G. Raghava, P. Gandhi, K.K. Vaze, Cyclic fracture, FCG and ratcheting studies on Type 304LN stainless steel straight pipes and elbows. Proc Engg. 55, 693–698 (2013). https://doi.org/10.1016/j.proeng.2013.03.316

    Article  CAS  Google Scholar 

  16. G. Raghava, Contribution to structural integrity: fatigue and fracture related full scale experimental investigations carried out at CSIR-SERC. Proc Engg. 86, 139–149 (2014). https://doi.org/10.1016/j.proeng.2014.11.022

    Article  CAS  Google Scholar 

  17. S.A. Krishnan, R. Nikhil, G. Sasikala, A. Moitra, S.K. Albert, A.K. Bhaduri, C. Lakshmana Rao, S. Vishnuvardhan, M. Saravanan, P. Gandhi, G. Raghava, Evaluation of fracture resistance of AISI type 316LN stainless steel base and welded pipes with circumferential through-wall crack. Int. J. Press Ves. Pip. 178, 104008 (2019). https://doi.org/10.1016/j.ijpvp.2019.104008

    Article  CAS  Google Scholar 

  18. Huang SN. Fatigue evaluation of piping systems with limited vibration test data. American Society of Mechanical Engineers, Pressure Vessel and Piping Conference, San Diego, California, pp 23-27, (1991)

  19. ASTM A312/A312M - 19. Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes. ASTM International, USA, 2019.

  20. Rahul Mittal, P.K. Singh, D.M. Pukazhendi, V. Bhasin, K.K. Vaze, A.K. Ghosh, Effect of vibration loading on the fatigue life of part-through notched pipe. Int. J. Press. Ves. Pip. 88(10), 415–422 (2011). https://doi.org/10.1016/j.ijpvp.2011.07.004

    Article  CAS  Google Scholar 

  21. D.M. Pukazhendhi, S. Vishnuvardhan, M. Saravanan, P. Gandhi, G. Raghava, Fatigue and fracture studies on 168 mm OD stainless steel straight pipes with circumferential outer surface crack on base metal. Report No. 4, SSP 6041, March 2008, CSIR - Structural Engineering Research Centre, Chennai

  22. D.M. Pukazhendhi, M. Saravanan, S. Vishnuvardhan, P. Gandhi, G. Raghava, Fatigue and fracture studies on 168 mm OD stainless steel straight pipes with circumferential outer surface crack on base metal. Procedia Eng. 86, 139–49 (2014)

    Google Scholar 

  23. American Petroleum Institute, Fitness-for-service, API 579/ASME FFS-1. (American Petroleum Institute, New York, 2016)

    Google Scholar 

  24. RCC-MRx Code, Design and construction rules for mechanical components in high-temperature structures, experimental reactors and fusion reactors, AFCEN, Paris, (2018)

  25. R6: Assessment of the integrity of structures containing defects, Revision 4, with amendments to Amendment 11, British Energy Generation Ltd., Gloucester (2015)

  26. S. Marie, S. Chapuliot, Y. Kayser, M.H. Lacire, B. Drubay, B. Barthelet, P. Le Delliou, V. Rougier, C. Naudin, P. Gilles, M. Triay, French RSE-M and RCC-MR code appendices for flaw analysis: presentation of the fracture parameters calculation-Part IV: cracked elbow. Int. J. Press. Ves. Pip. 84(10–11), 659–686 (2007). https://doi.org/10.1016/j.ijpvp.2007.05.006

    Article  CAS  Google Scholar 

  27. K.K. Vaze, Structural Integrity of Main Heat Transport System Piping of AHWR. Struct. Longevity. 3(2), 87–109 (2010). https://doi.org/10.3970/sl.2010.003.087

    Article  Google Scholar 

  28. A. Ramachandra Murthy, S. Vishnuvardhan, K.V. Anjusha, P. Gandhi, P.K. Singh, Prediction of fatigue crack initiation life in SA312 Type 304LN austenitic stainless steel straight pipes with notch. Nucl. Eng. Tech. 54(5), 1588–1596 (2022)

    Article  CAS  Google Scholar 

  29. M. Zheng, J.H. Luo, X.W. Zhao, Z.Q. Bai, R. Whang, Effect of pre-deformation on the fatigue crack initiation life of X60 pipeline steel. Int. J. Press. Ves. Pip. 82(7), 546–552 (2005). https://doi.org/10.1016/j.ijpvp.2005.01.006

    Article  CAS  Google Scholar 

  30. Y.D. Hu, Z.Z. Hu, S.Z. Cao, Theoretical study on Manson-Coffin equation for physically short cracks and lifetime prediction. Sci. China Tech. Sci. 55, 34–42 (2012). https://doi.org/10.1007/s11431-011-4581-z

    Article  CAS  Google Scholar 

  31. M. Kamaya, Fatigue crack tolerance design for stainless steel by crack growth analysis. Eng. Fract. Mech. 177, 14–32 (2017). https://doi.org/10.1016/j.engfracmech.2017.03.038

    Article  Google Scholar 

  32. J. Liu, Y. Wei, C. Yan, S. Lang, Method for predicting crack initiation life of notched specimen based on damage mechanics. J. Shanghai Jiaotong Univ. 23, 286–290 (2018). https://doi.org/10.1007/s12204-017-1900-y

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. CSIR-Structural Engineering Research Centre, Chennai, 600 113, India

    M. Saravanan, S. Vishnuvardhan, A. Ramachandra Murthy & P. Gandhi

  2. National Institute of Technology, Rourkela, 769 008, India

    Debasish Mandal

  3. Reactor Safety Division, Bhabha Atomic Research Centre, Mumbai, 400 085, India

    P. K. Singh

Authors
  1. M. Saravanan
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. Vishnuvardhan
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. A. Ramachandra Murthy
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. P. Gandhi
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Debasish Mandal
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. P. K. Singh
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to M. Saravanan.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Saravanan, M., Vishnuvardhan, S., Murthy, A.R. et al. Fatigue Crack Growth and Fracture Studies on Stainless Steel Straight Pipes Having Circumferential Surface Crack. J Fail. Anal. and Preven. (2024). https://doi.org/10.1007/s11668-024-01905-x

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s11668-024-01905-x

Keywords

Search

Navigation