Abstract
SiC/Gr/ZL101 aluminum-based composites were prepared by semi-solid stirring and gravity pouring method. The effects of SiC/Gr with different volume fractions on the microstructure and property of aluminum-based composites were studied by means of microstructure observation, tensile test, fracture scanning analysis and damping capacity test. The results show that the primary phase α-Al of ZL101 alloy prepared by semi-solid stirring and gravity pouring method is fragmented dendrite, along with the rising SiC volume fractions, the tensile strength of the composites first increases and then decreases while its elongation gradually decreases, the maximum tensile strength of the material can reach 168 MPa, up to 16% than that of ZL101 alloy, the fracture morphology is obviously brittle fracture. They also show that the addition of SiC and Gr improves the damping capacity of ZL101 alloy, the internal dissipation Q-1 of the composites is obviously higher than that of matrix alloy and gradually increases along with the rising SiC volume fractions. The damping mechanism of the composites is mainly the combined effects of both dislocation damping and interfacial damping.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Foundry Institution of China Mechanical Engineering Society. Casting Manual (Nonferrous alloy)[M]. Beijing: China Machine Press, 2006
Chen L G, Shue K H, Chang S Y, et al. Squeeze Casting of SiCp/Al-alloy Composites with Various Contents of Reinforcements[J]. Journal of Materials Research, 2002, 17(2): 376–385
Tong L, Fan J, Xiao B. Research Progress in Low Thermal Expansion Aluminum Matrix Composites[J]. Chinese Journal of Rare Metals, 2008, 6 (3): 375–380
Kelly B T. Physics of Graphite[M]. London: Applied Science Publishers Ltd, 1981
He Y Q. Research Progress on Particle Reinforced Metal Matrix Composites[J]. Heat Processing Technology, 2012, 41(2): 133–136
Herling D R, Grant G J. Low-cost Aluminum Metal Matrix Composite[J]. Advanced Materials & Processes, 2001, 159(7): 37–40
Zhang J, Perez R J, Lavernia E J. Dislocation-induced Damping in Metal Matrix Composites[J]. Journal of Materials Science, 1993, 28(3): 835–846
Zhang J, Perez R J, Lavernia E J. Effect of SiC and Graphite Particulates on the Damping Behavior of Metal Matrix Composites[J]. Acta Metallurgica et Materialia, 1994, 42(2): 395–409
Xie S S, Huang S H. Semi Solid Metal Processing Technology and Application[M]. Beijing: Metallurgical Industry Press, 1999
Liu Z, Mao W M, Zhao Z D. Semi-solid A356 Alloy Slurry Prepared by a New Process[J]. Acta Metallurgica Sinica, 2009, 45(4): 507–512
Hashin Z. Hasin Z. Complex Moduli of Viscoelastic Composites-I, General Theory and Application to Particulate Composites[J]. International Journal of Solids & Structures, 1970, 6(5): 539–552
Everett R K, Arsenault R J. Metal Matrix Composites: Mechanisms and Properties[M]. Boston: Academic Press, 1991
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
You, Z., Wang, Z., Wei, Y. et al. Microstructure and properties of SiC/Gr composite reinforced aluminum matrix composites material. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 33, 171–176 (2018). https://doi.org/10.1007/s11595-018-1802-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11595-018-1802-3