Abstract
Direct methanol fuel cell (DMFC) has great potential to replace the traditional battery in the field of portable power sources. This study investigates the operational and structural aspects of a vapor-feed semi-passive DMFC supplied with concentrated methanol. The effectiveness of using vaporous methanol to improve the cell performance is experimentally validated. Results indicate that there exits an optimal value of methanol concentration that favors both methanol supply and control of methanol crossover (MCO). With the increase in vaporization temperature, the cell performance can be enhanced. Based on the traditional structural design, a sintered porous metal plate is further used to depress the impact of MCO so that the cell performance can be significantly improved at a relatively higher methanol concentration. This is of great importance to enhance the energy density and operating duration for portable applications. The mechanisms related to the performance behaviors are discussed in detail.
Similar content being viewed by others
References
Qian W, Wilkinson DP, Shen J et al (2006) Architecture for portable direct liquid fuel cells. J Power Sources 154:202–213
Kamarudin SK, Achmad F, Daud WRW (2009) Overview on the application of direct methanol fuel cell (DMFC) for portable electronic devices. Int J Hydrogen Energy 34:6902–6916
Zhao TS, Chen R, Yang WW et al (2009) Small direct methanol fuel cells with passive supply of reactants. J Power Sources 191:185–202
Kallo J, Lehnert W, Helmolt R (2003) Conductance and methanol crossover investigation of Nafion membranes in a vapor-fed DMFC. J Electrochem Soc 150:A765–A769
Liu JG, Zhao TS, Chen R et al (2005) The effect of methanol concentration on the performance of a passive DMFC. Electrochem Commun 7:288–294
Abdelkareem MA, Nakagawa N (2006) DMFC employing a porous plate for an efficient operation at high methanol concentrations. J Power Sources 162:114–123
Abdelkareem MA, Morohashi N, Nakagawa N (2007) Factors affecting methanol transport in a passive DMFC employing a porous carbon plate. J Power Sources 172:659–665
Yousefi S, Ganji DD (2012) Experimental investigation of a passive direct methanol fuel cell with 100 cm2 active areas. Electrochim Acta 85:693–699
Yousefi S, Shakeri M, Sedighi K (2013) The effect of cell orientations and environmental conditions on the performance of a passive DMFC single cell. Ionics 19:1637–1647
Neburchilov V, Martin J, Wang H et al (2007) A review of polymer electrolyte membranes for direct methanol fuel cells. J Power Sources 169:221–238
Zainoodin AM, Kamarudin SK, Daud WRW (2010) Electrode in direct methanol fuel cells. Int J Hydrogen Energy 35:4606–4621
Scott K, Taama WM, Argyropoulos P (1999) Engineering aspects of the direct methanol fuel cell system. J Power Sources 79:43–59
Eccarius S, Krause F, Beard K et al (2008) Passively operated vapor-fed direct methanol fuel cells for portable applications. J Power Sources 182:565–579
Guo Z, Faghri A (2007) Vapor feed direct methanol fuel cells with passive thermal-fluids management system. J Power Sources 167:378–390
He YL, Miao Z, Yang WW (2012) Characteristics of heat and mass transport in a passive direct methanol fuel cell operated with concentrated methanol. J Power Sources 208:180–186
Xu C, Faghri A, Li X (2011) Improving the water management and cell performance for the passive vapor-feed DMFC fed with neat methanol. Int J Hydrogen Energy 36:8468–8477
Li X, Faghri A (2011) Effect of the cathode open ratios on the water management of a passive vapor-feed direct methanol fuel cell fed with neat methanol. J Power Sources 196:6318–6324
Masdar MS, Tsujiguchi T, Nakagawa N (2010) Improvement of water management in a vapor feed direct methanol fuel cell. J Power Sources 195:8028–8035
Kim HK, Oh JM, Kim JH et al (2006) Membrane electrode assembly for passive direct methanol fuel cells. J Power Sources 162:497–501
Wycisk R, Chisholm J, Lee J et al (2006) Direct methanol fuel cell membranes from Nafion–polybenzimidazole blends. J Power Sources 163:9–17
Mamlouk M, Scott K, Hidayati N (2011) High temperature direct methanol fuel cell based on phosphoric acid PBI membrane. J Fuel Cell Sci Technol 8:061009
Feng L, Zhang J, Cai W et al (2011) Single passive direct methanol fuel cell supplied with pure methanol. J Power Sources 196:2750–2753
Feng X, Huang RYM (1997) Liquid separation by membrane pervaporation: a review. Ind Eng Chem Res 36:1048–1066
Tang Y, Yuan W, Pan M et al (2010) Effects of structural aspects on the performance of a passive air-breathing direct methanol fuel cell. J Power Sources 195:5628–5636
Yuan W, Tang Y, Yang X et al (2013) Toward fully- and semi-passive operation of a liquid-fed direct methanol fuel cell. Fuel Cells 13:249–258
Acknowledgments
This work was supported by the Natural Science Foundation of Guangdong Province (S2013040016899), the Fundamental Research Funds for the Central Universities (2013ZM0003), the National Natural Science Foundation of China (51275180), and the Open Fund of Shanghai Key Laboratory of Digital Manufacture for Thin-walled Structures (2013001).
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Yuan, W., Tang, Y., Zhang, Z. et al. Operational and structural aspects of a vapor-feed semi-passive direct methanol fuel cell supplied with concentrated methanol. Chin. Sci. Bull. 59, 3216–3221 (2014). https://doi.org/10.1007/s11434-014-0454-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11434-014-0454-8