Abstract
A unique triple perovskite-type catalyst was successfully synthesized using the simple sol-gel approach, and surface acid modification was added to improve the ozone catalytic oxidation (OZCO) process ability to remove toluene more effectively. Our study indicates that La3MnCuNiO9 catalyst treated with KMnO4 shows the best toluene oxidation activity. At 250 °C, the rates of conversion and mineralization were 100% and 83%, respectively, under thermal catalytic system when C7H8 concentration = 500 ppm. During the OZCO system ([C7H8] = 20 ppm, O3/C7H8=8; room temperature), for 6 h, the conversion rate remained at 100%. The high ratios of Mn4+/(Mn4++Mn3+), Cu2+, and abundant surface oxygen species, high specific surface area, and pore volume lead to remarkable catalytic performance of this catalyst. Meanwhile, the catalyst contributes to superior stability and water resistance. The catalytic mechanism of La3MnCuNiO9 after KMnO4 treatment in the context of OZCO was further discussed. Overall, after KMnO4 treatment, the La3MnCuNiO9 catalyst reveals extraordinary catalytic activity and excellent stability combination of this catalyst with ozone exhibits high toluene removal efficiency in the OZCO system and has a good potential for industrial applications.
Similar content being viewed by others
Data availability
All data generated or analyzed during this study are included in this published article and its supplementary information files.
References
Abdelhamid HN et al (2021) Intrinsic catalase-mimicking MOFzyme for sensitive detection of hydrogen peroxide and ferric ions. Microchem J 163:105873
Aghbolaghy M et al (2017) Role of surface carboxylates in the gas phase ozone-assisted catalytic oxidation of toluene. Catal Lett 147:2421–2433
Ao R et al (2021) Simultaneous catalytic oxidation of NO and Hg0 over LaBO3(B = Co, Mn, Ni, and Cu) perovskites. J Environ Chem Eng 9:106612
Bao L et al (2022) Anionic defects engineering of Co3O4 catalyst for toluene oxidation. Fuel 314:122774
Bijelić J et al (2020) Rational sol–gel-based synthesis design and magnetic, dielectric, and optical properties study of nanocrystalline Sr3Co2WO9 triple perovskite. J Phys Chem C 124:12794–12807
Cao R et al (2019) Ammonium-treated birnessite-type MnO2 to increase oxygen vacancies and surface acidity for stably decomposing ozone in humid condition. Appl Surf Sci 495:143607
Chen B-b et al (2014) FeOx-supported gold catalysts for catalytic removal of formaldehyde at room temperature. Appl Catal B 154-155:73–81
Chen L et al (2022) Substitution of B-site in BaSb2O6 perovskite for surface lattice oxygen activation and boosted photocatalytic toluene mineralization. J Hazard Mater 436:129089
Deng L et al (2018) Catalytic deep combustion characteristics of benzene over cobalt doped Mn-Ce solid solution catalysts at lower temperatures. Mol Catal 446:72–80
Du J et al (2018) Low-temperature abatement of toluene over Mn-Ce oxides catalysts synthesized by a modified hydrothermal approach. Appl Surf Sci 433:1025–1035
Gong S et al (2019a) Heterostructured Ni/NiO nanocatalysts for ozone decomposition. ACS Appl Nano Mater 3:597–607
Gong S et al (2019b) Highly active and humidity resistive perovskite LaFeO3 based catalysts for efficient ozone decomposition. Appl. Catal B 241:578–587
Guo Z et al (2022) The high open-circuit voltage of perovskite solar cells: a review. Energ Environ Sci 15:3171–3222
Hojo H et al (2023) Catalytic properties of LaNiO3 and Mn-modified LaNiO3 catalysts for oxidation of CO and benzene. Catal Today 410, 127–134
Jiang F et al (2020) Insights into the influence of CeO2 crystal facet on CO2 hydrogenation to methanol over Pd/CeO2 catalysts. ACS Catal 10:11493–11509
Khatib M et al (2022) Sensors for volatile organic compounds. ACS Nano 16:7080–7115
Kumar A et al (2022) Unraveling the synergistic participation of Ni–Sn in nanostructured NiO/SnO2 for the catalytic transfer hydrogenolysis of benzyl phenyl ether. Energy Fuel 36:4404–4415
Li B et al (2019) Enhanced low-temperature activity of LaMnO3 for toluene oxidation: the effect of treatment with an acidic KMnO4. Chem Eng J 366:92–99
Li H et al (2023) Perovskite catalysts with different dimensionalities for environmental and energy applications: a review. Sep Purif Technol 307:122716
Li J et al (2021) Convergent ambient sunlight-powered multifunctional catalysis for toluene abatement over in situ exsolution of Mn3O4 on perovskite parent. Chem Eng J 412:128560
Li Z et al (2020) Oxygen vacancy mediated CuyCo3-yFe1Ox mixed oxide as highly active and stable toluene oxidation catalyst by multiple phase interfaces formation and metal doping effect. Appl Catal B 269:118827
Liu B et al (2021) Electrochemical upgrading of biomass-derived 5-hydroxymethylfurfural and furfural over oxygen vacancy-rich NiCoMn-layered double hydroxides nanosheets. Green Chem 23:4034–4043
Liu RY et al (2023) Ozone catalytic oxidation of low-concentration formaldehyde over ternary Mn-Ce-Ni oxide catalysts modified with FeOx. Environ Sci Pollut Res 30:32696–32709
Ma Z et al (2022) A highly efficient and robust bifunctional perovskite-type air electrode with triple-conducting behavior for low-temperature solid oxide fuel cells. Adv Funct Mater 32:2209054
Mao M et al (2021) Charge storage mechanism of MOF-derived Mn2O3 as high performance cathode of aqueous zinc-ion batteries. J Energy Chem 52:277–283
Pahari SK et al (2020) Few-layered phosphorene–graphitic carbon nitride nanoheterostructure as a metal-free photocatalyst for aerobic oxidation of benzyl alcohol and toluene. ACS Sustainable Chem Eng 8:13342–13351
Pan KL et al (2017) Removal of VOCs from gas streams with double perovskite-type catalysts. J Environ Sci 69:205–216
Sharmoukh W et al (2023) Fenton-like cerium metal–organic frameworks (Ce-MOFs) for catalytic oxidation of olefins, alcohol, and dyes degradation. J Cluster Sci 34:2509–2519
Sheng Z et al (2019) Mechanism of photocatalytic toluene oxidation with ZnWO4: a combined experimental and theoretical investigation. Cat Sci Technol 9:5692–5697
Wang X et al (2021) Synthesis of Au/UiO-66-NH2/graphene composites as efficient visible-light photocatalysts to convert CO2. Int J Hydrogen Energy 46:11621–11635
Wei X et al (2022) CeO2 nanosheets with anion-induced oxygen vacancies for promoting photocatalytic toluene mineralization: toluene adsorption and reactive oxygen species. Appl Catal B 317:121694
Wu M et al (2020a) Oxygen vacancy induced performance enhancement of toluene catalytic oxidation using LaFeO3 perovskite oxides. Chem Eng J 387:124101
Wu M et al (2020b) Fe–O terminated LaFeO3 perovskite oxide surface for low temperature toluene oxidation. J Clean Prod 277:123224
Wu M et al. (2020) Oxygen vacancy induced performance enhancement of toluene catalytic oxidation using LaFeO3 perovskite oxides. Chem Eng J 387:124101
Xie B et al (2023) Lead-free Cs3Bi2Br9 perovskite in-situ growth on 3D flower-like g-C3N4 microspheres to improve photocatalytic performance. Chem Eng J 452:139662
Xu A et al (2023) Modulating surface electron structure of LaMnO3 nanocatalysts for peroxymonosulfate activation by quenching-induced near-surface modification. Chem Eng J 473:145343
Xue T et al (2020) Iron mesh-supported vertically aligned Co-Fe layered double oxide as a novel monolithic catalyst for catalytic oxidation of toluene. Chem Eng J 384:123284
Yang J et al (2021a) Surface modification of macroporous La0.8Sr0.2CoO3 perovskite oxides integrated monolithic catalysts for improved propane oxidation. Catal Today 376:168–176
Yang Q et al (2021b) Activity improvement of acid treatment on LaFeO3 catalyst for CO oxidation. Catal Today 376:205–210
Yang X et al (2019) Enhancement effect of acid treatment on Mn2O3 catalyst for toluene oxidation. Catal Today 327:254–261
Yu Q et al (2019) Engineering an effective MnO2 catalyst from LaMnO3 for catalytic methane combustion. Fuel 239:1240–1245
Zhang Y et al (2021) Effect of the A-site cation over spinel AMn2O4 (A = Cu2+, Ni2+, Zn2+) for toluene combustion: enhancement of the synergy and the oxygen activation ability. Fuel 288:119700
Zhong J et al (2020) Toluene oxidation over Co3+-rich spinel Co3O4: evaluation of chemical and by-product species identified by in situ DRIFTS combined with PTR-TOF-MS. J Hazard Mater 386:121957
Author information
Authors and Affiliations
Contributions
HT Chuang provided and analyzed the test data and wrote the manuscript. RY Liu helped revise the manuscript. MB Chang provided conceptual and technical guidance for all aspects of the project. All authors read and approved the final manuscript. HT Chuang and RY Liu contributed equally to this work.
Corresponding author
Ethics declarations
Ethics approval and consent to participate
Not applicable.
Consent for publication
Not applicable.
Competing interests
The authors declare no competing interests.
Additional information
Responsible Editor: George Z. Kyzas
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Chuang, H.T., Liu, R.Y., Trinh, M.M. et al. Ozone catalytic oxidation of toluene over triple perovskite-type catalysts modified with KMnO4. Environ Sci Pollut Res 30, 106068–106082 (2023). https://doi.org/10.1007/s11356-023-29785-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-023-29785-y