Abstract
The present study employs a novel technique combining Fenton reaction with sinusoidal alternating current electrocoagulation (FSACEC), which is used to remove chemical oxygen demand (COD) in the simulated electroplating wastewater with the advantages of low energy consumption and small sludge. Fe2+, produced from the dissolution of Fe anodes in the FSACEC process, reacts with H2O2 to generate more ·OH and forms the iron hydroxide precipitates. The higher efficiency of COD removal is achieved through both effects of the oxidation reaction and the physical adsorption. The scanning electron microscopy (SEM) analysis shows that the particle size of FSACEC products is between 30 and 40 nm, which is less than the Fenton-direct current electrocoagulation products. The effect of the current concentration (IV), initial pH (pH0), and the addition of hydrogen peroxide (30% H2O2) was discussed on the optimal process parameters. In pH0 2.0 wastewater, applying current concentration of 1 A dm−3, the addition 20 cm3 dm−3 30% H2O2, the removal efficiency of COD reached 94.21% and the residual COD in wastewater was only 60 mg dm−3 after 90 min of operation. In order to investigate the maximum removal efficiency in a certain period of operation, the larger current concentration is applied to remove COD. The FSACEC process exhibits the higher removal COD efficiency and wider operation range of pH0 than the single Fenton technique. The FSACEC process is in accordance with the kinetic law of the pseudo-second-order kinetic adsorption model.
Similar content being viewed by others
References
Ahmed Basha C, Bhadrinarayana NS, Anantharaman N, Meera Sheriffa Begum KM (2008) Heavy metal removal from copper smelting effluent using electrochemical cylindrical flow reactor. J Hazard Mater 152:71–78. https://doi.org/10.1016/j.jhazmat.2007.06.069
Akyol A (2012) Treatment of paint manufacturing wastewater by electrocoagulation. Desalination 285:91–99
Ben Sasson M, Calmano W, Adin A (2009) Iron-oxidation processes in an electroflocculation (electrocoagulation) cell. J Hazard Mater 171:704–709. https://doi.org/10.1016/j.jhazmat.2009.06.057
Bouzek K, Schmidt MJ, Wragg AA (1999) Influence of anode material composition on the stability of electrochemically-prepared ferrate (VI) solutions. J Chem Technol Biotechnol 74:1188–1194
Brillas E, Sirés I, Oturan MA (2009) Electro-Fenton process and related electrochemical technologies based on Fenton’s reaction. Chem Chem Rev 109:6570–6631. https://doi.org/10.1021/cr900136g
Cañizares P, Sáez C, Lobato J, Rodrigo MA (2004) Electrochemical treatment of 2,4-dinitrophenol aqueous wastes using boron-doped diamond anodes. Electrochim Acta 49:4641–4650. https://doi.org/10.1016/j.electacta.2004.05.019
Chen WM, Wu CH, James EK, Chang JS (2008) Metal biosorption capability of Cupriavidus taiwanensis and its effects on heavy metal removal by nodulated Mimosa pudica. J Hazard Mater 151:364–371. https://doi.org/10.1016/j.jhazmat.2007.05.082
Eyvaz M, Kirlaroglu M, Aktas TS, Yuksel E (2009) The effects of alternating current electrocoagulation on dye removal from aqueous solutions. Chem Eng J 153:16–22. https://doi.org/10.1016/j.cej.2009.05.028
Farhadi S, Aminzadeh B, Torabian A, Khatibikamal V, Alizadeh Fard M (2012) Comparison of COD removal from pharmaceutical wastewater by electrocoagulation, photoelectrocoagulation, peroxi-electrocoagulation and peroxi-photoelectrocoagulation processes. J Hazard Mater 219-220:35–42. https://doi.org/10.1016/j.jhazmat.2012.03.013
Feng Y, Yang S, Xia L, Wang Z, Suo N, Chen H, Long Y, Zhou B, Yu Y (2019) In-situ ion exchange electrocatalysis biological coupling (i-IEEBC) for simultaneously enhanced degradation of organic pollutants and heavy metals in electroplating wastewater. J Hazard Mater 364:562–570. https://doi.org/10.1016/j.jhazmat.2018.10.068
Hakizimana JN, Gourich B, Chafi M, Stiriba Y, Vial C, Drogui P, Naja J (2017) Electrocoagulation process in water treatment: a review of electrocoagulation modeling approaches. Desalination 404:1–21. https://doi.org/10.1016/j.desal.2016.10.011
Hashim KS, Shaw A, Al Khaddar R, Ortoneda Pedrola M, Phipps D (2017a) Defluoridation of drinking water using a new flow column-electrocoagulation reactor (FCER)—experimental, statistical, and economic approach. J Environ Manag 197:80–88. https://doi.org/10.1016/j.jenvman.2017.03.048
Hashim KS, Shaw A, Al Khaddar R, Pedrola MO, Phipps D (2017b) Energy efficient electrocoagulation using a new flow column reactor to remove nitrate from drinking water—experimental, statistical, and economic approach. J Environ Manag 196:224–233. https://doi.org/10.1016/j.jenvman.2017.03.017
Hashim KS, Shaw A, Al Khaddar R, Pedrola MO, Phipps D (2017c) Iron removal, energy consumption and operating cost of electrocoagulation of drinking water using a new flow column reactor. J Environ Manag 189:98–108. https://doi.org/10.1016/j.jenvman.2016.12.035
Hashim KS et al (2018) Removal of phosphate from river water using a new baffle plates electrochemical reactor. MethodsX 5:1413–1418. https://doi.org/10.1016/j.mex.2018.10.024
Hashim KS et al (2019) Electrocoagulation as a green technology for phosphate removal from river water. Sep Purif Technol 210:135–144. https://doi.org/10.1016/j.seppur.2018.07.056
Hashim KS, AlKhaddar R, Shaw A, Kot P, Al-Jumeily D, Alwash R, Aljefery MH (2020) Electrocoagulation as an eco-friendly river water treatment method. In: Advances in water resources engineering and management. Lecture notes in civil engineering. pp 219–235. https://doi.org/10.1007/978-981-13-8181-2_17
Holt PK, Barton GW, Wark M, Mitchell CAJC, Physicochemical SA, Aspects E (2002) A quantitative comparison between chemical dosing and electrocoagulation. Colloids Surf A Physicochem Eng Asp 211:233–248
Jiménez C, Sáez C, Martínez F, Cañizares P, Rodrigo MA (2012) Electrochemical dosing of iron and aluminum in continuous processes: a key step to explain electro-coagulation processes. Sep Purif Technol 98:102–108. https://doi.org/10.1016/j.seppur.2012.07.005
Kamaraj R, Ganesan P, Lakshmi J, Vasudevan SJES, Research P (2013) Removal of copper from water by electrocoagulation process—effect of alternating current (AC) and direct current (DC). 20:399–412. https://doi.org/10.1007/s11356-012-0855-7
Klavarioti M, Mantzavinos D, Kassinos D (2009) Removal of residual pharmaceuticals from aqueous systems by advanced oxidation processes. Environ Int 35:402–417. https://doi.org/10.1016/j.envint.2008.07.009
Kobya M, Senturk E, Bayramoglu M (2006) Treatment of poultry slaughterhouse wastewaters by electrocoagulation. J Hazard Mater 133:172–176. https://doi.org/10.1016/j.jhazmat.2005.10.007
Kornienko GV, Chaenko NV, Vasil’Eva IS, Kornienko VL (2004) Indirect electrooxidation of organic substrates by hydrogen peroxide generated in an oxygen gas-diffusion electrode. Russ J Electrochem 40:148–152
Laat JD, Gallard H (1999) Catalytic decomposition of hydrogen peroxide by Fe (III) in homogeneous aqueous solution: mechanism and kinetic modeling. Environ Sci Technol 33:2726–2732
Linares-Hernández I, Barrera-Díaz C, Roa-Morales G, Bilyeu B, Ureña-Núñez F (2009) Influence of the anodic material on electrocoagulation performance. Chem Eng J 148:97–105. https://doi.org/10.1016/j.cej.2008.08.007
Luo X, Wang C, Luo S, Dong R, Tu X, Zeng G (2012) Adsorption of As (III) and As (V) from water using magnetite Fe3O4-reduced graphite oxide–MnO2 nanocomposites. Chem Eng J 187:45–52. https://doi.org/10.1016/j.cej.2012.01.073
Maher EK, O’Malley KN, Heffron J, Huo J, Wang Y, Mayer BK, McNamara PJ (2019) Removal of estrogenic compounds via iron electrocoagulation: impact of water quality and assessment of removal mechanisms. Environ Sci: Water Res Technol 5:956–966. https://doi.org/10.1039/c9ew00087a
Mantzavinos D, Psillakis E (2004) Enhancement of biodegradability of industrial wastewaters by chemical oxidation pre-treatment. J Chem Technol Biotechnol 79:431–454. https://doi.org/10.1002/jctb.1020
Mehmet A, Oturan J-JA, Oturan N, Pinson J (1999) Degradation of chlorophenoxyacid herbicides in aqueous media, using a novel electrochemical method.pdf. Pest Sci 55:558–562
Nariyan E, Sillanpää M, Wolkersdorfer C (2017) Electrocoagulation treatment of mine water from the deepest working European metal mine—performance, isotherm and kinetic studies. Sep Purif Technol 177:363–373. https://doi.org/10.1016/j.seppur.2016.12.042
Oturan MA (2000) An ecologically effective water treatment technique using electrochemically generated hydroxyl radicals for in situ destruction of organic pollutants_ Application to herbicide 2,4-D. J Appl Electrochem 30:475–482
Panizza M, Cerisola G (2009) Electro-Fenton degradation of synthetic dyes. Water Res 43:339–344
Quintana JB, Weiss S, Reemtsma T (2005) Pathways and metabolites of microbial degradation of selected acidic pharmaceutical and their occurrence in municipal wastewater treated by a membrane bioreactor. Water Res 39:2654–2664. https://doi.org/10.1016/j.watres.2005.04.068
Sengil IA, Ozacar M (2006) Treatment of dairy wastewaters by electrocoagulation using mild steel electrodes. J Hazard Mater 137:1197–1205. https://doi.org/10.1016/j.jhazmat.2006.04.009
Shafaei A, Rezaie M, Nikazar M (2011) Evaluation of Mn2+ and Co2+ removal by electrocoagulation: a case study. Chem Eng Process: Process Intensif 50:1115–1121. https://doi.org/10.1016/j.cep.2011.10.003
Shih Y-J, Lin C-P, Huang Y-H (2013) Application of Fered-Fenton and chemical precipitation process for the treatment of electroless nickel plating wastewater. Sep Purif Technol 104:100–105. https://doi.org/10.1016/j.seppur.2012.11.025
Song P, Yang Z, Xu H, Huang J, Yang X, Wang L (2014a) Investigation of influencing factors and mechanism of antimony and arsenic removal by electrocoagulation using Fe–Al electrodes. Ind Eng Chem Res 53:12911–12919. https://doi.org/10.1021/ie501727a
Song P, Yang Z, Xu H, Huang J, Yang X, Wang L (2014b) Investigation of influencing factors and mechanism of antimony and arsenic removal by electrocoagulation using Fe–Al. Electrodes Ind Eng Chem Res 53:12911–12919. https://doi.org/10.1021/ie501727a
Sun H, Wang H, Wang H, Yan Q (2018) Enhanced removal of heavy metals from electroplating wastewater through electrocoagulation using carboxymethyl chitosan as corrosion inhibitor for steel anode. Environ Sci: Water Res Technol 4:1105–1113. https://doi.org/10.1039/c8ew00322j
Wang L, Giammar DE (2015) Effects of pH, dissolved oxygen, and aqueous ferrous iron on the adsorption of arsenic to lepidocrocite. J Colloid Interface Sci 448:331–338. https://doi.org/10.1016/j.jcis.2015.02.047
Wang Z, Liu G, Fan Z, Yang X, Wang J, Wang S (2007) Experimental study on treatment of electroplating wastewater by nanofiltration. J Membr Sci 305:185–195. https://doi.org/10.1016/j.memsci.2007.08.011
Wen Q, Wang Q, Li X, Chen Z, Tang Y, Zhang C (2018) Enhanced organics and Cu2+ removal in electroplating wastewater by bioaugmentation. Chemosphere 212:476–485. https://doi.org/10.1016/j.chemosphere.2018.08.060
Xu T, Lei X, Sun B, Yu G, Zeng Y (2017) Highly efficient and energy-conserved flocculation of copper in wastewater by pulse-alternating current. Environ Sci Pollut Res Int 24:20577–20586. https://doi.org/10.1007/s11356-017-9280-2
Funding
This work is jointly funded by the National Natural Science Foundations of China (NO.51974115) and Hunan Provincial Innovation Foundation for Postgraduate (CX. 2018B188).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Responsible editor: Vítor Pais Vilar
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Kong, X., Zhou, Y., Xu, T. et al. A novel technique of COD removal from electroplating wastewater by Fenton—alternating current electrocoagulation. Environ Sci Pollut Res 27, 15198–15210 (2020). https://doi.org/10.1007/s11356-020-07804-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-020-07804-6