Abstract
Boundary lubrication state may dominate the friction pairs operating under severe conditions, yet its mechanism is not clearly understood and related numerical models are still lacking. A boundary lubrication model considering zinc dialkyldithiophosphate (ZDDP) tribofilms, which impact friction and wear performances, was developed in this study. A series of reciprocating experiments were conducted to verify this model and also to investigate the effects of the tribofilm on friction and wear under various temperatures and loads. Moreover, the experimental data were employed to modify the tribofilm removal equation, which enabled the present boundary lubrication model to be applied under a wide range of loads. The results showed that the friction force and wear depth both decline with the increasing lubricant temperature due to thicker tribofilms formed. As the load becomes heavier, the wear depth keeps increasing, while the tribofilm thickness first increases then decreases.
Similar content being viewed by others
References
Zhang, J., Meng, Y.: Boundary lubrication by adsorption film. Friction 3, 115–147 (2015)
Lyu, B., Meng, X., Zhang, R., Wen, C.: A deterministic contact evolution and scuffing failure analysis considering lubrication deterioration due to temperature rise under heavy loads. Eng. Fail. Anal. 123, 105276 (2021)
Spikes, H.: The history and mechanisms of ZDDP. Tribol. Lett. 17, 469–489 (2004)
Zhang, J., Spikes, H.: On the mechanism of ZDDP antiwear film formation. Tribol. Lett. 63, 1–15 (2016)
Fujita, H., Spikes, H.A.: The formation of zinc dithiophosphate antiwear films. Proc. Inst. Mech. Eng. J: J. Eng. Trib. 218, 265–278 (2004)
Westerfield, C., Agnew, S.: IR study of the chemistry of boundary lubrication with high temperature and high pressure shear. Wear 181, 805–809 (1995)
Gosvami, N., Bares, J., Mangolini, F., Konicek, A., Yablon, D., Carpick, R.: Mechanisms of antiwear tribofilm growth revealed in situ by single-asperity sliding contacts. Science 348, 102–106 (2015)
Zhang, J., Ewen, J.P., Ueda, M., Wong, J.S., Spikes, H.A.: Mechanochemistry of zinc dialkyldithiophosphate on steel surfaces under elastohydrodynamic lubrication conditions. ACS Appl. Mater. Interfaces 12, 6662–6676 (2020)
Zhang, J., Ueda, M., Campen, S., Spikes, H.: Boundary friction of ZDDP tribofilms. Tribol. Lett. 69, 1–17 (2021)
Pagkalis, K., Spikes, H., Jelita Rydel, J., Ingram, M., Kadiric, A.: The influence of steel composition on the formation and effectiveness of anti-wear films in tribological contacts. Tribol. Lett. 69, 75 (2021)
Ueda, M., Spikes, H., Kadiric, A.: In-situ observations of the effect of the ZDDP tribofilm growth on micropitting. Tribol. Int. 138, 342–352 (2019)
Kontou, A., Taylor, R.I., Spikes, H.A.: Effects of dispersant and ZDDP additives on fretting wear. Tribol. Lett. 69, 6 (2020)
Ghanbarzadeh, A., Parsaeian, P., Morina, A., Wilson, M.C., van Eijk, M.C., Nedelcu, I., et al.: A semi-deterministic wear model considering the effect of zinc dialkyl dithiophosphate tribofilm. Tribol. Lett. 61, 1–15 (2016)
Archard, J.: Contact and rubbing of flat surfaces. J. Appl. Phys. 24, 981–988 (1953)
Akchurin, A., Bosman, R.: A deterministic stress-activated model for tribo-film growth and wear simulation. Tribol. Lett. 65, 59 (2017)
Azam, A., Ghanbarzadeh, A., Neville, A., Morina, A., Wilson, M.C.: Modelling tribochemistry in the mixed lubrication regime. Tribol. Int. 132, 265–274 (2019)
Chen, Z., Gu, C., Tian, T.: Modeling of formation and removal of ZDDP tribofilm on rough surfaces. Tribol. Lett. 69, 1–9 (2021)
Hardy, W.B., Doubleday, I.: Boundary lubrication—the paraffin series. Proc. R. Soc. Lond. Ser. A 100, 550–574 (1922)
Buyanovskii, I.: Boundary lubrication by an adsorption layer. J. Frict. Wear 31, 33–47 (2010)
Greenwood, J., Tripp, J.: The contact of two nominally flat rough surfaces. Proc. Inst. Mech. Eng. 185, 625–633 (1970)
Pereira, G., Munoz-Paniagua, D., Lachenwitzer, A., Kasrai, M., Norton, P.R., Capehart, T.W., et al.: A variable temperature mechanical analysis of ZDDP-derived antiwear films formed on 52100 steel. Wear 262, 461–470 (2007)
Patir, N., Cheng, H.: An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication. J. Lubr. Technol. 100, 12–17 (1978)
Roelands, C.J.A., Winer, W.O., Wright, W.A.: Correlational aspects of the viscosity-temperature-pressure relationship of lubricating oils(Dr In dissertation at Technical University of Delft, 1966). J. Lubr. Technol. 93, 209–210 (1971)
Bowden, F.P., Leben, L.: The friction of lubricated metals. Philos. Trans. R. Soc. Lond. Ser. A 239, 1–27 (1940)
Bowden, F.P., Bowden, F.P., Tabor, D.: The Friction and Lubrication of Solids. Oxford University Press, Oxford (2001)
Roshan, R., Priest, M., Neville, A., Morina, A., Xia, X., Warrens, C.P., et al.: Friction modelling in boundary lubrication considering the effect of MoDTC and ZDDP in engine oils. Tribol. Online 6, 301–310 (2011)
Patir, N., Cheng, H.: Application of average flow model to lubrication between rough sliding surfaces. J. Lubr. Technol. 101, 220–229 (1979)
Pasaribu, H., Lugt, P.M.: The composition of reaction layers on rolling bearings lubricated with gear oils and its correlation with rolling bearing performance. Tribol. Trans. 55, 351–356 (2012)
Nehme, G., Mourhatch, R., Aswath, P.B.: Effect of contact load and lubricant volume on the properties of tribofilms formed under boundary lubrication in a fully formulated oil under extreme load conditions. Wear 268, 1129–1147 (2010)
Ueda, M., Kadiric, A., Spikes, H.: Influence of steel surface composition on ZDDP tribofilm growth using ion implantation. Tribol. Lett. 69, 62 (2021)
Ngo, D., He, X., Luo, H., Qu, J., Kim, S.H.: Competitive adsorption of ionic liquids versus friction modifier and anti-wear additive at solid/lubricant interface—speciation with vibrational sum frequency generation spectroscopy. Lubricants 8, 98 (2020)
Fujita, H., Glovnea, R., Spikes, H.: Study of zinc dialkydithiophosphate antiwear film formation and removal processes, part I: experimental. Tribol. Trans. 48, 558–566 (2005)
Bayat, R., Lehtovaara, A.: Tribofilm formation of simulated gear contact along the line of action. Tribol. Lett. 69, 1–11 (2021)
Bec, S., Tonck, A., Georges, J.M., Coy, R.C., Bell, J.C., Roper, G.W.: Relationship between mechanical properties and structures of zinc dithiophosphate anti-wear films. Proc. R. Soc. Lond. A: Math. Phys. Eng. Sci. 455, 4181–4203 (1999)
Aktary, M., McDermott, M.T., McAlpine, G.A.: Morphology and nanomechanical properties of ZDDP antiwear films as a function of tribological contact time. Tribol. Lett. 12, 155–162 (2002)
Taylor, R.I.: Tribology and energy efficiency: from molecules to lubricated contacts to complete machines. Faraday Discuss. 156, 361–382 (2012)
Demmou, K., Bec, S., Loubet, J.-L., Martin, J.-M.: Temperature effects on mechanical properties of zinc dithiophosphate tribofilms. Tribol. Int. 39, 1558–1563 (2006)
Tse, J.S., Song, Y., Liu, Z.: Effects of temperature and pressure on ZDDP. Tribol. Lett. 28, 45–49 (2007)
Bosman, R., Schipper, D.J.: Mild wear prediction of boundary-lubricated contacts. Tribol. Lett. 42, 169–178 (2011)
Demmou, K., Bec, S., Loubet, J.-L.: Effect of hydrostatic pressure on elastic properties of ZDTP tribofilms. arXiv preprint arXiv:07064235. https://arxiv.org/ftp/arxiv/papers/0706/0706.4235.pdf (2007)
Salinas Ruiz, V.R., Kuwahara, T., Galipaud, J., Masenelli-Varlot, K., Hassine, M.B., Héau, C., et al.: Interplay of mechanics and chemistry governs wear of diamond-like carbon coatings interacting with ZDDP-additivated lubricants. Nat. Commun. 12, 1–15 (2021)
Bosman, R., de Rooij, M.B.: Transient thermal effects and heat partition in sliding contacts. J. Tribol. (2010). https://doi.org/10.1115/1.4000693
Al Sheikh Omar, A., Salehi, F.M., Farooq, U., Neville, A., Morina, A.: Effect of zinc dialkyl dithiophosphate replenishment on tribological performance of heavy-duty diesel engine oil. Tribol. Lett. 70, 24 (2022)
Bai, L., Meng, Y., Zhang, V., Khan, Z.A.: Effect of surface topography on ZDDP tribofilm formation during running-in stage subject to boundary lubrication. Tribol. Lett. 70, 10 (2021)
Ueda, M., Kadiric, A., Spikes, H.: Influence of steel surface composition on ZDDP tribofilm growth using ion implantation. Tribol. Lett. 69, 1–14 (2021)
Xu, D., Wang, C., Espejo, C., Wang, J., et al.: Understanding the friction reduction mechanism based on the molybdenum disulfide tribofilm formation and removal. Langmuir 34, 13523–13533 (2018)
Mittal, P., Rai, H., Gosvami, N.N.: Microscopic tribology of ADC12 alloy under lubricant containing ZDDP and MoDTC using in situ AFM. Tribol. Lett. 69, 35 (2021)
Rydel, J.J., Pagkalis, K., Kadiric, A., Rivera-Díaz-del-Castillo, P.E.J.: The correlation between ZDDP tribofilm morphology and the microstructure of steel. Tribol. Int. 113, 13–25 (2016)
Rydel, J.J., Vegter, R., Rivera-Díaz-del-Castillo, P.: Tribochemistry of bearing steels: a new AFM method to study the material–tribofilm correlation. Tribol. Int. 98, 74–81 (2016)
Cyriac, F., Yi, T.X., Poornachary, S.K., Chow, P.S.: Behavior and interaction of boundary lubricating additives on steel and DLC-coated steel surfaces. Tribol. Int. 164, 107199 (2021)
Dawczyk, J., Morgan, N., Russo, J., Spikes, H.: Film thickness and friction of ZDDP tribofilms. Tribol. Lett. 67, 1–15 (2019)
Azam, A., Dorgham, A., Parsaeian, P., Morina, A., Neville, A., Wilson, M.C.: The mutual interaction between tribochemistry and lubrication: interfacial mechanics of tribofilm. Tribol. Int. 135, 161–169 (2019)
Zhao, Y., Geng, Z., Li, D., Wang, L., Lu, Z., Zhang, G.: An investigation on the tribological properties of graphene and ZDDP as additives in PAO4 oil. Diam. Relat. Mater. 120, 108635 (2021)
Spikes, H.: Stress-augmented thermal activation: tribology feels the force. Friction 6, 1–31 (2018)
Funding
This study was supported by the National Natural Science Foundation of China (52130502, 51875344) and the stable support project for basic military research institutes (WDZC-2019-JGKK-03).
Author information
Authors and Affiliations
Contributions
Conceptualization, BL, LZ, and XM; data curation, BL, LZ, and XM; formal analysis, BL; funding acquisition, XM; investigation, BL and LZ; experiment, BL; software, BL; supervision, XM and CW. All authors have read and agreed to the published version of the manuscript.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no potential conflicts of interest with respect to the research, authorship and/or publication of this article, and we have fully respected the research ethics principles.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Lyu, B., Zhang, L., Meng, X. et al. A Boundary Lubrication Model and Experimental Study Considering ZDDP Tribofilms on Reciprocating Friction Pairs. Tribol Lett 70, 65 (2022). https://doi.org/10.1007/s11249-022-01607-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11249-022-01607-1