Abstract
Fruit and vegetable harvesting robots have been widely studied and developed in recent years. However, the usage of existing end-effectors remains a challenge because they cannot be extended to other fruits and vegetables. This study proposes a novel end-effector that can harvest a variety of fruits and vegetables without any additional and complex control. For efficient harvesting, an end-effector in which the cutting, suction and transporting modules were integrated was designed and the performance of each module was verified through lab and field experiments, ensuring a reduction in harvesting time and improved productivity, the goal of harvest automation. Field experiments were conducted for a total of five cases (− 30°, − 15°, 0°, 15° and 30°) for each entry angle in three places. A total of 160 cluster tomatoes were harvested, with a total success rate of 80.6% and a total harvesting time of 15.5 s. The success rates for each entry angle were 75.0%, 71.9%, 93.8%, 81.2% and 81.2% and the harvesting times were 20.2, 16.0, 13.5, 13.7 and 14.1 s, respectively. The results also open the possibility of designing a robust harvesting system for the proposed end-effector. This study also provides directions for future discussion through which harvesting robots and the utilization of robust harvesting systems can be improved.
Similar content being viewed by others
References
Arad, B., Balendonck, J., Barth, R., Ben-Shahar, O., Edan, Y., Hellström, T., et al. (2020). Development of a sweet pepper harvesting robot. Journal of Field Robotics, 37, 1027–1039. https://doi.org/10.1002/rob.21937
Bac, C. W., Hemming, J., Van Tuijl, B., Barth, R., Wais, E., & van Henten, E. J. (2017). Performance evaluation of a harvesting robot for sweet pepper. Journal of Field Robotics, 34, 1123–1139. https://doi.org/10.1002/rob.21709
Bachche, S., & Oka, K. (2013). Performance testing of thermal cutting systems for sweet pepper harvesting robot in greenhouse horticulture. Journal of System Design and Dynamics, 7(1), 36–51. https://doi.org/10.1299/jsdd.7.36
Barnett, J., Duke, M., Au, C. K., & Lim, S. H. (2020). Work distribution of multiple Cartesian robot arms for kiwifruit harvesting. Computers and Electronics in Agriculture, 169, 105202. https://doi.org/10.1016/j.compag.2019.105202
Barth, R., Hemming, J., & van Henten, E. J. (2019). Angle estimation between plant parts for grasp optimisation in harvest robots. Biosystems Engineering, 183, 26–46. https://doi.org/10.1016/j.biosystemseng.2019.04.006
Chen, M., Tang, Y., Zou, X., Huang, Z., Zhou, H., & Chen, S. (2021). 3D global mapping of large-scale unstructured orchard integrating eye-in-hand stereo vision and SLAM. Computers and Electronics in Agriculture, 187, 106237. https://doi.org/10.1016/j.compag.2021.106237
Chiu, Y. C., Yang, P. Y., & Chen, S. (2013). Development of the end-effector of a picking robot for greenhouse-grown tomatoes. Applied Engineering in Agriculture, 29, 1001–1009. https://doi.org/10.13031/aea.29.9913
Choi, G., Dudte, L. H., & Mahadevan, L. (2019). Programming shape using kirigami tessellations. Nature Materials, 18(9), 999–1004. https://doi.org/10.1038/s41563-019-0452-y
Davidson, J., Bhusal, S., Mo, C., Karkee, M., & Zhang, Q. (2020). Robotic manipulation for specialty crop harvesting: A review of manipulator and end-effector technologies. Global Journal of Agricultural and Allied Sciences, 2, 25–41. https://doi.org/10.35251/gjaas.2020.004
Eizicovits, D., van Tuijl, B., Berman, S., & Edan, Y. (2016). Integration of perception capabilities in gripper design using graspability maps. Biosystems Engineering, 146, 98–113. https://doi.org/10.1016/j.biosystemseng.2015.12.016
Fujinaga, T., Yasukawa, S., & Ishii, K. (2021). Development and evaluation of a tomato fruit suction cutting device. In: IEEE/SICE international symposium on system integration (SII), Fukushima, Japan (pp 628–633). IEEE. https://doi.org/10.1109/IEEECONF49454.2021.9382670
Hou, L., Wu, Q., Sun, Q., Yang, H., & Li, P. (2016). Fruit recognition based on convolution neural network. In 12th international conference on natural computation, fuzzy systems and knowledge discovery (ICNC-FSKD), Changsha, China (pp 18–22). IEEE. https://doi.org/10.1109/FSKD.2016.7603144
Ji, W., Zhang, J., Xu, B., Tang, C., & Zhao, D. (2021). Grasping mode analysis and adaptive impedance control for apple harvesting robotic grippers. Computers and Electronics in Agriculture, 182, 106210. https://doi.org/10.1016/j.compag.2021.106210
Jun, J., Kim, J., Seol, J., Kim, J., & Son, H. I. (2021). Towards an efficient tomato harvesting robot: 3D perception, manipulation, and end-effector. IEEE Access, 9, 17631–17640. https://doi.org/10.1109/ACCESS.2021.3052240
Jun, J., Seol, J., & Son, H. I. (2020). A novel end-effector for tomato harvesting robot: Mechanism and evaluation. In 20th international conference on control, automation and systems (ICCAS), Busan, Korea (pp. 118–121). IEEE. https://doi.org/10.23919/ICCAS50221.2020.9268439
Kamilaris, A., & Prenafeta-Boldú, F. X. (2018). Deep learning in agriculture: A survey. Computers and Electronics in Agriculture, 147, 70–90. https://doi.org/10.1016/j.compag.2018.02.016
Kondo, N., Yata, K., Iida, M., Shiigi, T., Monta, M., Kurita, M., et al. (2010). Development of an end-effector for a tomato cluster harvesting robot. Engineering in Agriculture, Environment and Food, 3, 20–24. https://doi.org/10.1016/S1881-8366(10)80007-2
Kopecký, Z., Hlásková, L., & Orlowski, K. (2014). An innovative approach to prediction energetic effects of wood cutting process with circular-saw blades. Wood Research, 59(5), 827–834.
Kurtser, P., & Edan, Y. (2020). Planning the sequence of tasks for harvesting robots. Robotics and Autonomous Systems, 131, 103591. https://doi.org/10.1016/j.robot.2020.103591
Lin, G., Tang, Y., Zou, X., Cheng, J., & Xiong, J. (2019a). Fruit detection in natural environment using partial shape matching and probabilistic Hough transform. Precision Agriculture, 21, 160–177. https://doi.org/10.1007/s11119-019-09662-w
Lin, G., Tang, Y., Zou, X., Xiong, J., & Fang, Y. (2019b). Color-, depth-, and shape-based 3D fruit detection. Precision Agriculture, 21, 1–17. https://doi.org/10.1007/s11119-019-09654-w
Liu, J., Peng, Y., & Faheem, M. (2020). Experimental and theoretical analysis of fruit plucking patterns for robotic tomato harvesting. Computers and Electronics in Agriculture, 173, 105330. https://doi.org/10.1016/j.compag.2020.105330
Mu, L., Cui, G., Liu, Y., Cui, Y., Fu, L., & Gejima, Y. (2020). Design and simulation of an integrated end-effector for picking kiwifruit by robot. Information Processing in Agriculture, 7, 58–71. https://doi.org/10.1016/j.inpa.2019.05.004
Orlowski, K. A., Ochrymiuk, T., Atkins, A., & Chuchala, D. (2013). Application of fracture mechanics for energetic effects predictions while wood sawing. Wood Science and Technology, 47, 949–963. https://doi.org/10.1007/s00226-013-0551-x
Saleh, M. A., Soliman, M., Mousa, M. A., Elsamanty, M., & Radwan, A. G. (2020). Design and implementation of variable inclined air pillow soft pneumatic actuator suitable for bioimpedance applications. Sensors and Actuators A: Physical, 314, 112272. https://doi.org/10.1016/j.sna.2020.112272
SepúLveda, D., Fernández, R., Navas, E., Armada, M., & González-De-Santos, P. (2020). Robotic aubergine harvesting using dual-arm manipulation. IEEE Access, 8, 121889–121904. https://doi.org/10.1109/ACCESS.2020.3006919
Shamshiri, R. R., Weltzien, C., Hameed, I. A., Yule, I. J., Grift, T. E., Balasundram, S. K., et al. (2018). Research and development in agricultural robotics: A perspective of digital farming. International Journal of Agricultural and Biological Engineering, 11(4), 1–14. https://doi.org/10.25165/j.ijabe.20181104.4278
Shintake, J., Cacucciolo, V., Floreano, D., & Shea, H. (2018). Soft robotic grippers. Advanced Materials, 30, 1707035. https://doi.org/10.1002/adma.201707035
Silwal, A., Davidson, J. R., Karkee, M., Mo, C., Zhang, Q., & Lewis, K. (2017). Design, integration, and field evaluation of a robotic apple harvester. Journal of Field Robotics, 34, 1140–1159. https://doi.org/10.1002/rob.21715
Van Henten, E. J., Hemming, J., Van Tuijl, B. A. J., Kornet, J. G., Meuleman, J., Bontsema, J., et al. (2002). An autonomous robot for harvesting cucumbers in greenhouses. Autonomous Robots, 13(3), 241–258. https://doi.org/10.1023/A:1020568125418
Wang, H., Zhao, Q., Li, H., & Zhao, R. (2022). Polynomial-based smooth trajectory planning for fruit-picking robot manipulator. Information Processing in Agriculture, 9(1), 112–122. https://doi.org/10.1016/j.inpa.2021.08.001
Wang, Y., Yang, Y., Yang, C., Zhao, H., Chen, G., Zhang, Z., et al. (2019). End-effector with a bite mode for harvesting citrus fruit in random stalk orientation environment. Computers and Electronics in Agriculture, 157, 454–470. https://doi.org/10.1016/j.compag.2019.01.015
Wang, Y., Yang, Y., Zhao, H., Liu, B., Ma, J., He, Y., et al. (2020). Effects of cutting parameters on cutting of citrus fruit stems. Biosystems Engineering, 193, 1–11. https://doi.org/10.1016/j.biosystemseng.2020.02.009
Xiong, Y., Ge, Y., & From, P. J. (2021). An improved obstacle separation method using deep learning for object detection and tracking in a hybrid visual control loop for fruit picking in clusters. Computers and Electronics in Agriculture, 191, 106508. https://doi.org/10.1016/j.compag.2021.106508
Xiong, Y., Peng, C., Grimstad, L., From, P. J., & Isler, V. (2019). Development and field evaluation of a strawberry harvesting robot with a cable-driven gripper. Computers and Electronics in Agriculture, 157, 392–402. https://doi.org/10.1016/j.compag.2019.01.009
Yu, Y., Zhang, K., Yang, L., & Zhang, D. (2019). Fruit detection for strawberry harvesting robot in non-structural environment based on mask RCNN. Computers and Electronics in Agriculture, 163, 104846. https://doi.org/10.1016/j.compag.2019.06.001
Zhang, B., Xie, Y., Zhou, J., Wang, K., & Zhang, Z. (2020). State-of-the-art robotic grippers, grasping and control strategies, as well as their applications in agricultural robots: A review. Computers and Electronics in Agriculture, 177, 105694. https://doi.org/10.1016/j.compag.2020.105694
Zhang, B., Zhou, J., Meng, Y., Zhang, N., Gu, B., Yan, Z., et al. (2018). Comparative study of mechanical damage caused by a two-finger tomato gripper with different robotic grasping patterns for harvesting robots. Biosystems Engineering, 171, 245–257. https://doi.org/10.1016/j.biosystemseng.2018.05.003
Funding
This paper has been supported by the Korea Institute of Planning and Evaluation for Technology in Food, Agriculture and Forestry (IPET) through the Smart Farm Innovation Technology Development Program, funded by the Ministry of Agriculture, Food and Rural Affairs (MAFRA) (421031-04).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Competing interests
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Park, Y., Seol, J., Pak, J. et al. A novel end-effector for a fruit and vegetable harvesting robot: mechanism and field experiment. Precision Agric 24, 948–970 (2023). https://doi.org/10.1007/s11119-022-09981-5
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11119-022-09981-5