The method of synthesis of a zinc-substituted hydroxyapatite powder is presented, and the technology of creating coatings by its spraying is described. The results of studies on the morphological, physical, and chemical parameters of a zinc-substituted hydroxyapatite coating by using X-ray analysis, infrared spectroscopy, transmission electron microscopy, optical microscopy, SEM, and other methods are given.
Similar content being viewed by others
References
V. M. Taran, A. V. Lyasnikova, N. V. Protasova, and O. A. Dudareva, “Improvement of plasma coating used in medicine,” Biomedical Eng., 46, No. 4, 134-137 (2012).
V. N. Lyasnikov, A. V. Lyasnikova, A. V. Pivovarov, I. N. Antonov, and V. A. Papshev, “Study of structure of bioceramic coatings obtained by plasma spraying of hydroxyapatites of synthetic and biological origins,” Biomedical Eng., 45, No. 4, 119-127 (2011).
R. A. Surmenev, M. A. Surmeneva, V. F. Resinugin, and M. Epple, “High-frequency magnetron calcium phosphate coatings on the materials of medical implants,” Izv. Tomsk. Politekhn. Univ., 315, No. 2, 138-141 (2009).
I. V. Fadeeva, N. V. Bakunova, V. S. Komlev, L. Medvetskii, A. S. Fomin, A. N. Gurin, S. M. Barinov, “Zinc- and silver-containing hydroxyapatites: synthesis and properties,” Dokl. Acad. Nauk, 442, No. 6, 780-783 (2012).
S. M. Barinov and V. S. Komlev, Bioceramics Based on Calcium Phosphates [in Russian], Nauka, Moscow (2005).
Acknowledgments
The reported study was partially supported by RFBR, reaearch project No. 15-03-02767a. The authors are grateful to S. Ya. Pichkhidze for the synthesis of intial powders.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Mekhanika Kompozitnykh Materialov, Vol. 51, No. 6, pp. 1135-1140 , November-December, 2015.
Rights and permissions
About this article
Cite this article
Lyasnikova, A.V., Markelova, O.A., Lyasnikov, V.N. et al. Biocomposite Plasma-Sprayed Coatings Based on Zinc-Substituted Hydroxyapatite: Structure, Properties, and Prospects of Application. Mech Compos Mater 51, 801–804 (2016). https://doi.org/10.1007/s11029-016-9550-y
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11029-016-9550-y