Laser correction of geometric errors in computer controlled multicoordinate equipment using the Kalman's concepts of observability and controllability is discussed. It is proposed that observations of multicoordinate systems be made with a versatile laser measurement system and that accuracy be monitored with a postprocessor in the control program.
Similar content being viewed by others
References
S. N. Grigor’ev, D. A. Masterenko, V. I. Teleshevskii, and P. N. Emel’yanov, “Current state of metrological support for the machine building industry,” Izmer. Tekhn., No. 11, 56–59 (2012).
V. I. Teleshevskii and S. G. Grishin, “Measurement data system for nanometrology,” Vest. MGTU Stankin, No. 2, 33–40 (2008).
V. I. Teleshevskii, “On the problem of smart measurement processes in manufacturing systems,” Proc. Int. Conf. Soft Computing and Measurements (SCM’99) (1999), pp. 34–37.
S. N. Grigor’ev and V. I. Teleshevskii, “Measurement problems in technological shaping processes,” Izmer. Tekhn., No. 7, 13–18 (2011).
P. A. McKeown and J. Loxham, “Some aspects of the design of high precision measuring machines,” Ann. CIRP, 22, No. 1, 139–140 (1973).
H. Schwenke et al., “Geometric error management and compensation of machines – an update,” Ann. CIRP, 57, No. 2, 660–675 (2008).
H. Schwenke, M. Franke, and J. Hannaford, “Error mapping of CMMs and Machine tools by a single tracking interferometer,” Ann. CIRP, 54, No. 1, 475–478 (2005).
S. N. Grigoriev, V. I. Teleshevsky, and V. A. Sokolov, “Volumetric geometric accuracy improvement for multi-axis systems based on laser software error correction,” Proc. Int. Conf. Competitive Manufacturing, COMA’13, Stellenbosch, South Africa (2013), pp. 301–306.
V. I. Teleshevskii and V. A. Sokolov, “Laser correction of geometric errors of multicoordinate systems with computer control,” Izmer. Tekhn., No. 5, 33–37 (2012).
Renishaw, Systems for Accuracy Checking and Calibration of Machine Tools and Coordinate-Measurement Machines, http://renishaw.com, accessed Feb. 21, 2015.
Hewlett Packard, Systems for Accuracy Checking and Calibration of Machine Tools and Coordinate-Measurement Machines, http://hp.com, accessed Feb. 21, 2015.
Automated Precision Inc. (API), Systems for Accuracy Checking and Calibration of Machine Tools and Coordinate- Measurement Machines, http://apisensor.com, accessed Feb. 21, 2015.
A. A. Voronov, Introduction to the Dynamics of Complex Controlled Systems, Nauka, Moscow (1985).
V. I. Teleshevskii, “Principles for constructing computerized quality control systems,” Avtomatiz. Proektir., No. 1, 21–27 (1999).
V. I. Teleshevskii, “Measurement information technology in machine building,” Vest. MGTU Stankin, No. 1, 33–38 (2008).
V. I. Teleshevskii, “Measurement information technology in machine building (conclusion),” Vest. MGTU Stankin, No. 2, 41–45 (2008).
A. Lamikiz, L. N. Lopez de Lacalle, O. Ocerin, et al., “The Denavit and Hartenberg approach applied to evaluate the consequences in the tool tip position of geometrical errors in five-axis milling centres,” Int. J. Adv. Manuf. Technol., 37, No. 1–2, 122–139 (2008).
M. Rahman, J. Heikkala, and K. Lappalainen, “Modeling measurement and error compensation of multi-axis machine tools,” Int. J. Mach. Tools & Manuf., 40, No. 10, 1535–1546 (2000).
A. C. Okafor and Y. M. Ertekin, “Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics,” Int. J. Mach. Tools & Manuf., 40, No. 8, 1199– 1213 (2000).
Y. Lin and Y. Shen, “Modelling of five-axis machine tool metrology models using the matrix summation approach,” Int. J. Adv. Manuf. Technol., 21, No. 4, 243–248 (2003).
K. Gee Ahn and D. W. Cho, “An analysis of the volumetric error uncertainty of a three axis machine tool by beta distribution,” Int. J. Mach. Tools & Manuf., 40, No. 15, 2235–2248 (2000).
This work was supported by the Ministry of Education and Science of the Russian Federation as part of state assignment (NIR No. 1883) on equipment at the Collective User Center of STANKIN (agreement No. 14.593.21.0004 of December 4, 2014, with unique project identifier RFMEFI59314X0004).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izmeritel’naya Tekhnika, No. 7, pp. 14–17, July, 2015.
Rights and permissions
About this article
Cite this article
Teleshevskii, V.I., Sokolov, V.A. Automatic Correction of Three-Dimensional Geometric Errors in Computer Controlled Measurement and Technological Systems. Meas Tech 58, 747–751 (2015). https://doi.org/10.1007/s11018-015-0787-y
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11018-015-0787-y