The development of a new secondary standard for low absolute pressures is discussed. A measurement chamber is built with a system for maintaining pressure employing modern technologies. The standard meets international standards in terms of its metrological and technical characteristics.
Similar content being viewed by others
References
V. N. Gorobei, N. G. Nikolaev, D. M. Fomin, and A. A. Chernyshenko, “Standard vacuum gauge systems,” Glav. Metrolog, No. 3, 42–44 (2011).
GOST 8.381–2009, GSI. Standards. Methods for Expressing Accuracy.
GOST 8.736–2011, GSI. Repeated Direct Measurements. Methods for Processing Measurement Data. Basic Assumptions.
S. V. Marinko, A. V. Talalai, I. G. Boiko, et al., “New secondary standards for the unit of pressure,” Vest. Metrologa, No. 1, 25–28 (2013).
RMG 43–2001, GSI. Use of the Guide to the Expression of Uncertainty in Measurement.
R. 50.2.038–2004, GSI. Single Direct Measurements. Evaluation of Errors and Uncertainty in Measurement Results.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izmeritel’naya Tekhnika, No. 3, pp. 3–6, March, 2015.
Rights and permissions
About this article
Cite this article
Gorobei, V.N., Talalai, A.V., Chernyshenko, A.A. et al. Updating the Secondary Standard for the Unit of Low Absolute Pressure VE-13–13. Meas Tech 58, 223–228 (2015). https://doi.org/10.1007/s11018-015-0690-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11018-015-0690-6