The national primary standard GET 43–2013 for the units of pressure in the range of 10–1600 MPa and of the effective area of piston pairs in dead-weight pressure gauges in the range of 0.05–1 cm2 has been created to upgrade the national primary special standard GET 43–73 for the unit of pressure in the range of 250–1500 MPa. The unexcluded systematic error has been reduced by a factor of 10.
Similar content being viewed by others
References
M. K. Zhokhovskii, Theory and Design of Instruments with Unsealed Pistons, Mashgiz, Moscow (1959).
V. V. Bakhvalova, E. V. Zolotykh, and V. M. Borovkov, “State special standard for the units of pressure in the range from 2500·105–15000·105 Pa,” Izmer. Tekhn., No. 11, 3–4 (1973); Measur. Techn., 16, No. 11, 1603–1605 (1973).
E. V. Zolotykh (ed.), High Pressure Studies, Izd. Standartov, Moscow (1987).
V. M. Borovkov, Theoretical Models and Questions Regarding the Design, Technology, and Rational Use of Excess Pressure Manometers: Auth. Abstr. Dissert. Doct. Techn. Sci., Moscow (1991).
V. I. Feodos’ev, Strength of Materials, Nauka, Moscow (1972).
A. E. Aslanyan, “Deviation of the deformation of a piston and cylinder of a high-pressure piston pair from the deformation calculated using a solution of the Lamé problem,” Metrologiya, No. 6, 20–25 (2011); Measur. Techn., 54, No. 6, 694–697 (2011).
A. Aslanyan, Abstr. CCMP-5 and IMEKO TC-16 Conf., Berlin (2011).
A. E. Aslanyan, Methods for Reducing the Unexcluded Systematic Component of the Error in the National Primary Special Standard GET 43–73 for the Unit of Pressure: Auth. Abstr. Dissert. Cand. Techn. Sci., Mendeleevo (2012).
V. M. Borovkov and S. V. Borovkov, Patent No. 2219506 RF, “Dead-weight pressure gauge,” Izobret. Polezn. Modeli, No. 35 (2003).
Author information
Authors and Affiliations
Corresponding author
Additional information
(D. I. Kuznetsov) Deceased
Translated from Izmeritel'naya Tekhnika, No. 11, pp. 7–10, November, 2014.
Rights and permissions
About this article
Cite this article
Borovkov, V.M., Kuznetsov, D.I., Sekoyan, S.S. et al. Creation of a National Primary Standard for the Unit of Pressure in the Range of 10–1600 MPa. Meas Tech 57, 1233–1237 (2015). https://doi.org/10.1007/s11018-015-0611-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11018-015-0611-8