Skip to main content
Log in

Study of gases released under incomplete combustion using PCFC–FTIR

  • Published:
Journal of Thermal Analysis and Calorimetry Aims and scope Submit manuscript

Abstract

In order to get new insights on cable behavior during real-scale fires, the gases released under incomplete combustion in pyrolysis combustion flow calorimeter were recorded for several PVC and halogen-free flame-retardant cables. Incomplete combustion was monitored by changing combustion temperature between 600 and 900 °C. Gases were identified using PCFC–FTIR coupling. Quantitative assessment of different gases produced during combustion was also carried out. It appears that larger amounts of unburnt gases are produced for PVC cable at low temperature (< 650 °C). Moreover, CO release is observed for PVC cable up to 800 °C while this gas disappears between 700 and 750 °C for halogen-free flame-retardant cables. Interestingly, the CO production is non-monotonous upon the temperature range investigated. These analyses would be useful to assess the risk of multiple re-ignitions during cable burning in real-scale fires, especially in confined compartments.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17

Similar content being viewed by others

References

  1. Cogen JM, Lin TS, Whaley PD. Material design for fire safety in wire and cable applications. In: Wilkie CA, Morgan AB, editors. Fire retardancy of polymeric materials. Boca Raton: CRC Press; 2010. p. 783–808.

    Google Scholar 

  2. IEC 60332-2-2. Tests on electric and optical fibre cables under fire conditions—part 2-2: test for vertical flame propagation for a single small insulated wire or cable—procedure for diffusion flame, Geneva, Switzerland; 2004.

  3. IEC 61034-2. Measurement of smoke density of cables burning under defined conditions—part 2 test procedures, Geneva, Switzerland; 2006.

  4. Hunter LW. Fire hazards of electric cables in nuclear power plants. Johns Hopkins APL Tech Dig (Appl Phys Lab). 1983;4:205–11.

    Google Scholar 

  5. Pretrel H, Quere P, Forestier M. Experimental study of burning rate behaviour in confined and ventilated fire compartments. Fire Saf Sci. 2005;8:1217–28.

    Article  Google Scholar 

  6. Nasr A, Suard S, El-Rabii H, Gay L, Garo JP. Fuel mass-loss rate determination in a confined and mechanically ventilated compartment fire using a global approach. Combust Sci Technol. 2011;183:1342–59.

    Article  CAS  Google Scholar 

  7. Melis S, Audouin L. Effects of vitiation on the heat release rate in mechanically-ventilated compartment fires. Fire Saf Sci. 2008;9:931–42.

    Article  Google Scholar 

  8. Lassus J, Courty L, Garo JP, Studer E, Jourda P, Aine P. ventilation effects in confined and mechanically ventilated fires. Int J Therm Sci. 2014;75:87–94.

    Article  CAS  Google Scholar 

  9. Delichatsios MA, Silcock GWH, Liu X, Delichatsios M, Lee Y. Mass pyrolysis rates and excess pyrolysate in fully developed enclosure fires. Fire Saf J. 2004;39:1–21.

    Article  CAS  Google Scholar 

  10. Andersson P, Rosell L, Simonson M, Emanuelsson V. Small and large scale fire experiments with electric cables under well-ventilated and vitiated conditions. Fire Technol. 2004;40:27–262.

    Article  Google Scholar 

  11. Audouin L, Prétrel H, Zavaleta P, OECD PRISME 2 Fire Research Project. Current status and perspectives. In: 13th International post-conference seminar on fire safety in nuclear power plants and installations; 2011–2016.

  12. Zavaleta P, Audouin L. Cable tray fire tests in a confined and mechanically ventilated facility. Fire Mater. 2018;42:28–43.

    Article  CAS  Google Scholar 

  13. Investigation heat and smoke propagation mechanisms in multi-compartment fire scenarios, Final Report of the PRISME project, NEA/CSNI/R(2017)14, Jan 2018.

  14. Meinier R, Sonnier R, Zavaleta P, Suard S, Ferry L. Fire behavior of halogen-free flame retardant electrical cables with the cone calorimeter. J Hazard Mater. 2018;342:306–16.

    Article  CAS  Google Scholar 

  15. Wang Z, Wang J. An experimental study on the fire characteristics of new and aged building wires using a cone calorimeter. J Therm Anal Calorim. 2018. https://doi.org/10.1007/s10973-018-7626-8.

    Article  Google Scholar 

  16. Martinka J, Rantuch P, Sulova J, Martinka F. Assessing the fire risk of electrical cables using a cone calorimeter. J Therm Anal Calorim. 2018. https://doi.org/10.1007/s10973-018-7556-5.

    Article  Google Scholar 

  17. Sonnier R, Otazaghine B, Ferry L, Lopez-Cuesta JM. Study of the combustion efficiency of polymers using a pyrolysis-combustion flow calorimeter. Combust Flame. 2013;160:2182–93.

    Article  CAS  Google Scholar 

  18. Sonnier R, Dorez G, Vahabi H, Longuet C, Ferry L. FTIR-PCFC coupling: a new method for studying the combustion of polymers. Combust Flame. 2014;161:1398–407.

    Article  CAS  Google Scholar 

  19. Guo H, Lyon RE, Safronava N, Walters RN, Crowley S. A simplified model of carbon monoxide yield in burning of polymeric solids containing flame retardants. Fuel. 2018;222:175–9.

    Article  CAS  Google Scholar 

  20. Walters RN, Safronava N, Lyon RE. A microscale combustion calorimeter study of gas phase combustion of polymers. Combust Flame. 2015;162(3):855–63.

    Article  CAS  Google Scholar 

  21. Guo H, Lyon RE, Safronava N, Walters RN, Crowley S. Kinetics of carbon monoxide yield in burning of polymeric solids containing flame retardants. In: 28th Annual conference on recent advances in flame retardancy of polymeric materials, FLAME, Newton; 2017.

  22. Guo H, Lyon RE, Safronava N, Walters RN, Crowley S. Kinetic effects of carbon monoxide yield in burning of polymeric solids containing flame retardants. In: 10th U.S. national combustion meeting, College Park; 2017.

  23. Speitel L, Walters RN, Lyon RE. Toxicity assessment of polymers at constant fuel/oxygen ratios in the microscale combustion calorimeter. San Francisco: Fire and Materials; 2017.

    Google Scholar 

  24. Walters RN, Speitel L, Lyon RE. Combustion products of polymers at constant fuel/oxygen ratios. In: INTERFLAM 2016, Royal Holloway College, London; 4–6 July 2016.

  25. Guo H, Lyon RE, Safronava N, Walters RN, Crowley S. A simplified model of carbon monoxide yield in burning of polymeric solids containing flame retardants. In: 10th Mediterranean combustion symposium, Naples; 2017.

  26. Plumecocq W, Audouin L, Zavaleta P. Horizontal cable tray fire in a well‐confined and mechanically ventilated enclosure using a two-zone model. Fire and Materials; 2019. https://doi.org/10.1002/fam.2698.

  27. Schartel B, Pawlowski K, Lyon R. Pyrolysis combustion flow calorimeter: A tool to assess flame retarded PC/ABS materials? Thermochim Acta. 2007;462:1–14.

    Article  CAS  Google Scholar 

  28. Folarin O, Eromosele I, Eromosele C. Thermal stabilization of poly(vinyl chloride) by metal carboxylates of Ximenia Americana seed oil under inert condition. J Mater Environ Sci. 2012;3:507–14.

    CAS  Google Scholar 

  29. Liu P, Zhao M, Guo J. Thermal stabilities of poly(vinyl chloride)/calcium carbonate (PVC/CaCO3) composites. J Macromol Sci Part B Phys. 2006;45:1135–40.

    Article  CAS  Google Scholar 

  30. Hlaing Z, Wajima T, Uchiyama S, Nakagome H. Reduction of bromine compounds in the pyrolysis oil of computer casing plastics using shell, Ca(OH)2 and NaOH. APCBEE Procedia. 2014;10:193–7.

    Article  CAS  Google Scholar 

  31. McNeill I, Memetea L. Pyrolysis products of poly(vinyl chloride), dioctyl phthalate and their mixture. Polym Degrad Stab. 1994;43:9–25.

    Article  CAS  Google Scholar 

  32. Benes M, Milanov N, Matuscek G, Kettrup A, Placek V, Balek V. Thermal degradation of PVC cable insulation studied by simultaneous TG-FTIR and TG-EGA methods. J Therm Anal Calorim. 2004;78:621–30.

    Article  CAS  Google Scholar 

  33. Babushok V, Tsang W. Inhibitor rankings for alkane combustion. Combust Flame. 2000;123:488–506.

    Article  CAS  Google Scholar 

  34. Noto T, Babushok V, Burgess DR Jr, Hamins A, Tsang W, Miziolek A. Effect of halogenated flame inhibitors on C1 − C2 organic flames. In: 26th Symposium on combustion/the combustion institute; 1996. p. 1377–1383.

    Article  Google Scholar 

  35. Noto T, Babushok V, Hamins A, Tsang W. Inhibition effectiveness of halogenated compounds. Combust Flame. 1998;112:147–60.

    Article  CAS  Google Scholar 

  36. Babushok V, Tsang W, Linteris GT, Reinelt D. Chemical limits to flame inhibition. Combust Flame. 1998;115:551–60.

    Article  CAS  Google Scholar 

  37. McGarry K, Zilberman J, Hull TR, Woolley WD. Decomposition and combustion of EVA and LDPE alone and when fire retarded with ATH. Polym Int. 2000;49:1193–8.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

The authors thank Dr. Belkacem Otazaghine for his help to carry out and to interpret Py-GC/MS analyses and Loïc Dumazert for his help to manage coupling analyses.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Rodolphe Sonnier.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Below is the link to the electronic supplementary material.

Supplementary material 1 (DOCX 31 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Decimus, A., Sonnier, R., Zavaleta, P. et al. Study of gases released under incomplete combustion using PCFC–FTIR. J Therm Anal Calorim 138, 753–763 (2019). https://doi.org/10.1007/s10973-019-08160-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10973-019-08160-5

Keywords

Navigation