Abstract
The fast response temperature sensor is an effective tool for measuring the temperature of internal combustion engine, in order to improve the performance of fast response temperature sensor, and the Coiflet wavelet finite element method is applied in analyzing the heat transfer rules of fast response temperature sensor. Firstly, the related research progress on the performance analysis of fast response and wavelet finite element method is summarized, respectively, and research significance of heat transfer of fast response sensor based on Coiflet wavelet finite element method is summarized in detail. Secondly, the basic theory of fast response sensor is studied, and the new structure of the fast response temperature sensor is analyzed. Thirdly, the Coiflet wavelet finite element model of analyzing heat transfer of fast response sensor is constructed by combing the Coiflet wavelet scale function with traditional finite element method, and the theoretical models are deduced. Finally, the heat transfer simulation of fast response temperature sensor based on Coiflet wavelet finite element method is carried out, and simulation results show that the Coiflet finite element has higher computing precision and efficiency than traditional finite element method, and the heat transfer rules of fast response temperature sensor are also obtained.
Similar content being viewed by others
References
Nesterenko TG, Koleda AN, Barbin ES, Uchaikin SV. Temperature error compensation in two-component microelectromechanical gyroscope. IEEE Trans Compon Packag Manuf Technol. 2014;4:1598–605.
Liu LL, Wang LY, Guo X, Liu Z, Liu L. Design and optimization of micro-hotplate electrode structure for micro gas sensor. Electron Compon Mater. 2014;33:50–3.
Luo Y, Kun Y, Shi YB, Shang CX. Research of radiosonde humidity sensor with temperature compensation function and experimental verification. Sens Actuator A (Phys). 2014;218:49–59.
Fröhlich T, Augustin S, Ament C. Temperature-dependent dynamic behavior of process temperature sensors. Int J Thermophys. 2015;36:2115–23.
Vereshchagina E, Tiggelaar RM, Sanders RGP, Wolters RAM, Gardeniers JGE. Low power micro-calorimetric sensors for analysis of gaseous samples. Sens Actuator B (Chem). 2015;206:772–87.
Jorapur N, Palaparthy VS, Sarik S, John J, Baghini MS, Ananthasuresh GK. A low-power, low-cost soil-moisture sensor using dual-probe heat-pulse technique. Sens Actuator A (Phys). 2015;233:108–17.
Zhao B. Application of Hermitian wavelet finite element method on temperature field analysis of LNG tank under ultra-low temperature. J Therm Anal Calorim. 2015;121:721–7.
Khulief YA, El-Gebeily MA, Oke WA, Ahmed WH. Modal frequencies of fiber-reinforced polymer pipes with wall-thinning using a wavelet-based finite element model. Proc Inst Mech Eng Part C: J Mech Eng Sci. 2015;229:2377–86.
Oke Wasiu A, Khulief Yehia A. Vibration analysis of composite pipes using the finite element method with B-spline wavelets. J Mech Sci Technol. 2016;30:623–35.
Chen JP, Tang WY, Huang PJ, Xu L. A mesh-free analysis method of structural elements of engineering structures based on B-spline wavelet basis function. Struct Eng Mech. 2016;57:281–94.
Feng DS, Yang BK, Wang X, Du HK. Daubechies wavelet finite element method for solving the GPR wave equations. Acta Geophys Sin. 2016;59:342–54.
Pan XF, Zhao XJ, Chen JQ, Bermak A, Fan ZY. A fast-response/recovery ZnO hierarchical nanostructure based gas sensor with ultra-high room-temperature output response. Sens Actuator B (Chem). 2015;206:764–71.
Li ZH, Zhou XC, Shi JY, Zou XB, Huang XW, Tahir HE, Holmes M. Fast response ammonia sensor based on porous thin film of polyaniline/sulfonated nickel phthalocyanine composites. Sens Actuator B (Chem). 2016;226:553–62.
Avila M, Codina R, Principe J. Finite element dynamical subgrid-scale model for low Mach number flows with radiative heat transfer. Int J Numer Method Heat Fluid Flow. 2015;25:1361–84.
Torra V, Isalgue A, Lovey FC, Sade M. Shape memory alloys as an effective tool to damp oscillations. J Therm Anal Calorim. 2015;119(3):1475–533.
Glowacz A. DC motor fault analysis with the use of acoustic signals, Coiflet wavelet transform, and K-nearest neighbor classifier. Arch Acoust. 2015;40:321–7.
Katarzyna M, Piotr M, Łukasz S, Adam G, Jerzy R. Analysis of the effect of antiwear CrN coating thickness on the evolution of thermomechanical interactions in the substrate/PVD coating system. J Therm Anal Calorim. 2016;125:1241–7.
Xue XF, Zhang XW, Li B, Qiao BJ, Chen XF. Modified Hermitian cubic spline wavelet on interval finite element for wave propagation and load identification. Finite Elem Anal Des. 2014;91:48–58.
Samaratunga D, Jha R, Gopalakrishnan S. Wave propagation analysis in laminated composite plates with transverse cracks using the wavelet spectral finite element method. Finite Elem Anal Des. 2014;89:19–32.
Xiang JW, Liang M, He YM. Experimental investigation of frequency-based multi-damage detection for beams using support vector regression. Eng Fract Mech. 2014;131:257–68.
Acknowledgements
This research was supported by the National Natural Science Foundation (51206075).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhao, B., Han, S., Shi, C.J. et al. Heat transfer analysis of fast response sensor for internal combustion engine based on Coiflet wavelet finite element method. J Therm Anal Calorim 129, 1181–1187 (2017). https://doi.org/10.1007/s10973-017-6285-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-017-6285-5