We obtain the analytic solution of the problem of stressed state for an isotropic shallow spherical shell with two circular perfectly rigid inclusions loaded by shear forces. The cases of two inclusions of equal or unequal radii are investigated numerically. It is shown that the stresses acting in the shell significantly increase as the radii of the inclusions or the distance between them decrease.
Similar content being viewed by others
References
A. N. Guz’, I. S. Chernyshenko, Val. N. Chekhov, et al., Theory of Thin Shells Weakened by Holes, in A. N. Guz’ (editor), Methods of the Calculation of Shells [in Russian], Vol. 1, Naukova Dumka, Kiev (1980).
V. V. Panasyuk and M. P. Savruk, “On the problem of determination of stress concentration in a stretched plate with two holes,” Mat. Metody Fiz.-Mekh. Polya, 51, No. 2, 112–123 (2008); English translation: J. Math. Sci., 162, No. 1, 132–148 (2009).
I. A. Birger and Ya. G. Panovko (editors), Strength, Stability, and Vibrations: Handbook [in Russian], Vol. 1, Mashinostroenie, Moscow (1968).
I. B. Rudenko, “Equilibrium of an elastoplastic spherical shells with two different circular holes,” in: Problems of Computational Mechanics and Strength of Structures [in Ukrainian], Issue 15 (2011), pp. 156–161.
V. A. Salo and A. V. Kornienko, “Calculation of the stressed state of an elastic shell with a periodic system of circular holes,” in: Problems of the Design and Production of Structures of Flying Vehicles [in Russian], Issue 1 (2011), pp. 76–82.
V. N. Chekhov and S. V. Zakora, “Stress concentration in a transversely isotropic spherical shell with two circular rigid inclusions,” Prikl. Mekh., 47, No. 4, 111–118 (2011); English translation: Int. Appl. Mech., 47, No. 4, 441–448 (2011).
V. P. Shevchenko, “On the solution of static problems for shallow shells under the actions of local loads,” Prikl. Mekh., 7, No. 6, 37–42 (1971); English translation: Int. Appl. Mech., 7, No. 6, 612–616 (1971).
V. P. Shevchenko and S. V. Zakora, “On the mutual influence of closely located circular holes with rigid contours in a spherical shell,” Mat. Metody Fiz.-Mekh. Polya, 52, No. 4, 160–165 (2009); English translation: J. Math. Sci., 174, No. 3, 322–330 (2011).
Y. Y. Deryugin and G. V. Lasko, “Field of stresses in an isotropic plane with circular inclusion under tensile stress,” Engineering, 4, No. 9, 583–589 (2012).
Kh. Fuad, R. A. Siregar, Ch. Rangkuti, et al., “Stress concentration factors of various adjacent holes configurations in a spherical pressure vessel,” in: Proc. 5th Australasian Congr. Appl. Mech, ACAM-2007 (Dec. 10–12, 2007, Brisbane, Australia), pp. 68–73.
D. V. Kubair and B. Bhanu-Chandar, “Stress concentration factor due to a circular hole in functionally graded panels under uniaxial tension,” Int. J. Mech. Sci., 50, No. 4, 732–742 (2008).
M. Miyagawa, T. Suzuki, and J. Shimura, “Analysis of in-plane problems with singular disturbances for an isotropic elastic medium with two circular holes or rigid inclusions,” J. Environment Eng., 6, No. 4, 778–791 (2011).
Author information
Authors and Affiliations
Additional information
Translated from Matematychni Metody ta Fizyko-Mekhanichni Polya, Vol. 56, No. 3, pp. 57–66, July–September, 2013.
Rights and permissions
About this article
Cite this article
Chekhov, V.N., Zakora, S.V. Stresses in a Shallow Spherical Shell Loaded by Two Tangential Forces Via Rigid Circular Inclusions. J Math Sci 205, 554–566 (2015). https://doi.org/10.1007/s10958-015-2266-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10958-015-2266-z