Abstract
The nickel–iron–chromium (alloy 20) is enriching by hybrid surface treatment through plasma nitride (PN) and physical vapor deposition (PVD) process. The plasma nitriding process takes 12 h at 500 °C. Potentiodynamic testing is used to characterize the corrosion performance of the treated material, followed by morphological analysis of the exposed surface; XRD, EDX, SEM, hardness, and tensile testing are used to investigate appropriate coating properties. Plasma nitride and hybrid PVD nickel–iron–chromium alloys exhibit perlite (γ + α′) phases and martensite (γ + α) phases, respectively. The martensite microstructure ensures superior tensile strength and hardness. The pin-on-disc tribometer test proposes to analyze friction and hard-faced behavior in the dry sliding position. The inclusion of Si improves the adherent oxide film, resulting in a low wear rate in TiAlSiN alloy 20. Due to the presence of the passive film, TiAlSiN alloy 20 exposes the most passive region to attain better corrosion resistance.
Graphical Abstract
Similar content being viewed by others
References
M. Razavian, S. Fatemi, A.T. Najafabadi, Extraction of highly pure nickel hydroxide from spent NiO/Al2O3 catalyst: statistical study on leaching by sulfuric acid lixiviant and selective precipitation. J. Environ. Chem. Eng. 8(2), 103660 (2020)
A.K. Mishra, N. Ebrahimi, D.W. Shoesmith, P.E. Manning, Materials selection for use in hydrochloric acid, in CORROSION 2016. OnePetro, 2016.
M.H. Morcali, L.T. Khajavi, S. Aktas, D.B. Dreisinger, Oxidative dissolution of nickel matte in dilute sulfuric acid solutions. Hydrometallurgy 185, 257–265 (2019)
Z. Shi, Yu. Yongyan, Y. Wang, D. Zhang, L. Dai, M. Wang, Effect of nickel content on the processing and microstructure evolution of Co–Cr–Mo–Ni alloys. Mater. Sci. Eng. A 759, 195–202 (2019)
M.E. Maja, O.E. Falodun, B.A. Obadele, S.R. Oke, P.A. Olubambi, Nanoindentation studies on TiN nanoceramic reinforced Ti–6Al–4V matrix composite. Ceram. Int. 44(4), 4419–4425 (2018)
A. Sowińska, E. Czarnowska, M. Tarnowski, J. Witkowska, T. Wierzchoń, Structure and hemocompatibility of nanocrystalline titanium nitride produced under glow-discharge conditions. App Surf. Sci 436, 382–390 (2018)
Z. Zhang, X. Li, H. Dong, Response of a molybdenum alloy to plasma nitriding. Int. J. Refract. Met. Hard Mater. 72, 388–395 (2018)
D. Manova, S. Mändl, H. Neumann, B. Rauschenbach, Analysis of in situ XRD measurements for low energy ion beam nitriding of austenitic stainless steel. Surf. Coat. Technol. 256, 64–72 (2014)
E. Zdravecká, J. Slota, P. Solfronk, M. Kolnerová, Evaluation of the effect of different plasma-nitriding parameters on the properties of low-alloy steel. J. Mater. Eng. Perform. 26(7), 3588–3596 (2017)
R. Selvabharathi, R.G. Srinivasan, S. Palani, Influence of optimization techniques and nano surface coating materials on microstructure of iron-nickel-chromium alloy using wire EDM process. Mater. Sci. 39(2), 152–165 (2021)
J. Wang, Y. Lin, J. Yan, D. Zen, Q. Zhang, R. Huang, H. Fan, Influence of time on the microstructure of AISI 321 austenitic stainless steel in salt bath nitriding. Surf. Coat. Technol. 206(15), 3399–3404 (2012)
M. Fonović, A. Leineweber, O. Robach, E.A. Jägle, E.J. Mittemeijer, The nature and origin of double expanded austenite in Ni-based Ni-Ti alloys developing upon low temperature gaseous nitriding. Metall. Mater. Trans. A 46(9), 4115–4131 (2015)
C. Sudha, R. Anand, V. Thomas Paul, S. Saroja, M. Vijayalakshmi, Nitriding kinetics of Inconel 600. Surf. Coat. Technol. 226, 92–99 (2013)
D.L. Williamson, O. Ozturk, R. Wei, P.J. Wilbur, Metastable phase formation and enhanced diffusion in fcc alloys under high dose, high flux nitrogen implantation at high and low ion energies. Surf. Coat. Technol. 65(1–3), 15–23 (1994)
J. Oddershede, T.L. Christiansen, K. Ståhl, M.A. Somers, Extended X-ray absorption fine structure investigation of nitrogen stabilized expanded austenite. Scr. Mater. 62(5), 290–293 (2010)
T. Bell, Current status of supersaturated surface engineered S-phase materials. Key Eng. Mater. 373, 289–295 (2008)
Z. Hong, L. Cheng, J. Deng, Lu. Linjing, Y. Wang, An investigation of environment barrier coating on 2D C/SiC composites prepared by liquid phase process. J. Inorg. Organomet. Polym. Mater. 22(4), 692–698 (2012)
P. Farazmand, M. Khanlary, S. Fehli, A. SalarElahi, M. Ghoranneviss, Synthesis of carbon nanotube and zinc oxide (CNT–ZnO) nanocomposite. J. Inorg. Organomet. Polym. Mater. 25(4), 942–947 (2015)
P. Chaudhary, F. Fatima, A. Kumar, Relevance of nanomaterials in food packaging and its advanced future prospects. J. Inorg. Organomet. Polym. Mater. 30(12), 5180–5192 (2020)
D.H. Yu, C.Y. Wang, X.L. Cheng, F.L. Zhang, Microstructure and properties of TiAlSiN coatings prepared by hybrid PVD technology. Thin Solid Films 517, 4950–4955 (2009)
Z.L. Wu, Y.G. Li, B. Wua, M.K. Lei, Effect of microstructure on mechanical and tribological properties of TiAlSiN nanocomposite coatings deposited by modulated pulsed power magnetron sputtering. Thin Solid Films 503, 197–205 (2015)
N. He, H. Li, L. Ji, X. Liu, H. Zhou, J. Chen, High temperature tribological propertiesof TiAlSiN coatings produced by hybrid PVD technology. Tribol. Int. 98, 133–143 (2016)
S. Veprek, H.-D. Männling, M. Jilek, P. Holubar, Avoiding the high-temperature decomposition and softening of (Al1−xTix) N coatings by the formation of stable superhard nc-(Al1−xTix) N/a-Si3N4 nanocomposite. Mater. Sci. Eng. A 366(1), 202–205 (2004)
S. Carvalho, L. Rebouta, A. Cavaleiro, L.A. Rocha, J. Gomes, E. Alves, Microstructure and mechanical properties of nanocomposite (Ti, Si, Al) N coatings. Thin Solid Films 398, 391–396 (2001)
B. Navinšek, P. Panjan, I. Urankar, P. Cvahte, F. Gorenjak, Improvement of hot-working processes with PVD coatings and duplex treatment. Surf. Coat. Technol. 142, 1148–1154 (2001)
E. Damerchi, A. Abdollah-zadeh, R. Poursalehi, M.S. Mehr, Effects of functionally graded TiN layer and deposition temperature on the structure and surface properties of TiCN coating deposited on plasma nitrided H13 steel by PACVD method. J. Alloys Compd. 772, 612–624 (2019)
A. Parthiban, A. Mohana Krishnan, B. Radha Krishnan, V. Vijayan, experimental investigation of mechanical and wear properties of AL7075/Al2O3/MICA hybrid composite. J. Inorg. Organomet. Polym. Mater. 31(3), 1026–1034 (2021)
S. Khanchaiyaphum, C. Saikaew, A. Wisitsoraat, S. Surinphong, Wear behaviours of filtered cathodic arc deposited TiN, TiAlSiN and TiCrAlSiN coatings on AISI 316 stainless steel fishing net-weaving machine components under dry soft-sliding against nylon fibres. Wear 390, 146–154 (2017)
R.G. Srinivasan, R. Selvabharathi, S. Palani, R. Karuppasamy, Influence of high-velocity oxygen fuel spraying and plasma nitriding on microstructure properties of iron-nickel-chromium alloy using hybrid surface heat treatment. Mater. Res. Express 6(8), 086584 (2019)
K. Mukahiwa, F. Scenini, M. Grace Burke, N. Platts, D.R. Tice, J.W. Stairmand, Corrosion fatigue and microstructural characterisation of Type 316 austenitic stainless steels tested in PWR primary water. Corr. Sci. 131, 57–70 (2018)
X. Xu, Z. Yu, L. Cui, Microstructure and properties of plasma nitrided layers on Ni-based superalloy Ni-20Cr. Mater. Charact. 155, 109798 (2019)
N. Singh, P.K. Singh, A. Shukla, S. Singh, P. Tandon, Synthesis and characterization of nanostructured magnesium oxide: insight from solid-state density functional theory calculations. J. Inorg. Organomet. Polym. Mater. 26(6), 1413–1420 (2016)
A.F. Rousseau, J.G. Partridge, E.L.H. Mayes, J.T. Toton, M. Kracica, D.G. McCulloch, E.D. Doyle, Microstructural and tribological characterisation of a nitriding/TiAlN PVD coating duplex treatment applied to M2 High Speed Steel tools. Surf. Coat. Technol. 272, 403–408 (2015)
P.H.T. Shioga, C. Binder, G. Hammes, A.N. Klein, J.D.B. de Mello, Effects of different plasma nitrided layers on the tribological performance of DLC coatings. Mater. Res. 19, 1180–1188 (2016)
V. Godinho, T.C. Rojas, S. Trasobares, F.J. Ferrer, M.-P. Delplancke-Ogletree, A. Fernández, Microstructural and chemical characterization of nanostructured TiAlSiN coatings with nanoscale resolution. Microsc. Microanal. 18(3), 568–581 (2012)
Y.M. Liu, C.L. Jiang, Z.L. Pei, H. Lei, J. Gong, C. Sun, Microstructure and properties of AlB2-type WB2 thin films deposited by direct-current magnetron sputtering. Surf Coat. Technol. 245, 108–116 (2014)
N.D. Nam, M. Vaka, N.T. Hung, Corrosion behavior of TiN, TiAlN, TiAlSiN-coated 316L stainless steel in simulated proton exchange membrane fuel cell environment. J. Power Sources 268, 240–245 (2014)
S.U. Din, A. Azeez, S. Haq, M. Hafeez, M. Imran, S. Hussain, S.S. Alarfaji, Investigation on cadmium ions removal from water by a nanomagnetite based biochar derived from Eleocharis dulcis. J. Inorg. Organomet. Polym. Mater. 31(1), 415–425 (2021)
A.A.H. El-Bassuony, Influence of high annealing temperature on structural, magnetic and antimicrobial activity of silver chromite nanoparticles for biomedical applications. J. Inorg. Organomet. Polym. Mater. 30(5), 1821–1828 (2020)
S. Alghool, A. El-Halim, F. Hanan, A.M. Mostafa, An eco-friendly synthesis of V2O5 nanoparticles and their catalytic activity for the degradation of 4-nitrophrnol. J. Inorg. Organomet. Polym. Mater. 29(4), 1324–1330 (2019)
S. Kudaibergenov, M. Dauletbekova, G. Toleutay, S. Kabdrakhmanova, T. Seilkhanov, K. Abdullin, Hydrogenation of p-nitrobenzoic acid by gold and palladium nanoparticles immobilized within macroporous amphoteric cryogels in aqueous solution. J. Inorg. Organomet. Polym. Mater. 28(6), 2427–2438 (2018)
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Srinivasan, R.G., Palani, S., Rajaravi, C. et al. Comparative Analysis over Tribology Characterization of TiAlN and TiAlSiN PVD Coating on Plasma Nitride Alloy 20. J Inorg Organomet Polym 32, 2082–2093 (2022). https://doi.org/10.1007/s10904-022-02271-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10904-022-02271-7