Abstract
The energy density of the capacitors is determined by the breakdown strength and the relative dielectric constant. Polyimide (PI) has high breakdown strength, linear polarization property and high energy efficiency. However, due to the low dielectric constant of PI, its energy storage density is not high enough to satisfy the requirement. Therefore, seeking a method to improve the dielectric constant while ensuring its breakdown strength is the key to solve the problem of the low energy storage of PI. In this study, the core–shell structured barium zirconate titanate calcium (BCZT) and silica (SiO2) composited fibers (SiO2@BCZT) have been constructed and modified by silane coupling agent (KH550), the SiO2@BCZT inorganic fillers are beneficial to improve the dielectric constant of the PI-based composites. In order to further improve the breakdown strength of the composites, the sandwich-structured composite films have been designed, where the PI filled with SiO2@BCZT films act as dielectric reinforced top and bottom layers, and the PI filled with hydroxylated boron nitride nanosheet (BN) films serve as breakdown strength enhanced inter-layer. The microstructure and electrical properties of the composite films have been systematically investigated. For the sandwiched composite films, the discharged energy density and energy storage efficiency reach to 3.37 J/cm3 and 84.89%, respectively. This study provides an effective way to improve the energy storage properties for PI-based composite films.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-019-02362-1/MediaObjects/10854_2019_2362_Fig1_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-019-02362-1/MediaObjects/10854_2019_2362_Fig2_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-019-02362-1/MediaObjects/10854_2019_2362_Fig3_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-019-02362-1/MediaObjects/10854_2019_2362_Fig4_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-019-02362-1/MediaObjects/10854_2019_2362_Fig5_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-019-02362-1/MediaObjects/10854_2019_2362_Fig6_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs10854-019-02362-1/MediaObjects/10854_2019_2362_Fig7_HTML.png)
Similar content being viewed by others
References
B. Chu, X. Zhou, K. Ren et al., A dielectric polymer with high electric energy density and fast discharge speed. Science 313, 5795 (2006)
Z. Dang, J. Yuan, S. Yao et al., Flexible nanodielectric materials with high permittivity for power energy storage. Adv. Mater. 25, 44 (2013)
Y. Cao, P.C. Irwin, K. Younsi, The future of nanodielectrics in the electrical power industry. IEEE Trans. Dielectr. Electr. Insul. 11, 5 (2004)
M. Rabuffi, G. Picci, Status quo and future prospects for metallized propylene energy storage capacitors. IEEE Trans. Plasma Sci. 30, 5 (2002)
Z. Pan, L. Yao, J. Liu et al., Superior discharge energy density and efficiency in polymer nanocomposites induced by linear dielectric core–shell nanofibers. J. Mater. Chem. C 7, 405 (2019)
V.K. Thakur, R.K. Gupta, Recent progress on ferroelectric polymer-based nanocomposites for high energy density capacitors: synthesis, dielectric properties, and future aspects. Chem. Rev. 116, 4260 (2016)
Y. Sun, J. Wang, S. Qi et al., Permittivity transition from highly positive to negative: polyimide/carbon nanotube composite’s dielectric behavior around percolation threshold. Appl. Phys. Lett. 107, 1 (2015)
J. Chen, X. Yu, F. Yang et al., Enhanced energy density of polymer composites filled with BaTiO3@Ag nanofibers for pulse power application. J. Mater. Sci. Mater. Electron. 28, 11 (2017)
D. Guo, K. Cai, Y. Wang, A distinct mutual phase transition in a new PVDF based lead-free composite film with enhanced dielectric and energy storage performance and low loss. J. Mater. Chem. C 5, 10 (2017)
Y. Wang, J. Cui, Q. Yuan et al., Nanocomposites: significantly enhanced breakdown strength and energy density in sandwich-structured barium titanate/poly(vinylidene fluoride) nanocomposites. Adv. Mater. 27, 42 (2015)
P. Hu, Y. Shen, Y. Guan et al., Topological-structure modulated polymer nanocomposites exhibiting highly enhanced dielectric strength and energy density. Adv. Funct. Mater. 24, 21 (2014)
Y. Zhang, C.H. Zhang, Y. Feng et al., Excellent energy storage performance and thermal property of polymer-based composite induced by multifunctional one-dimensional nanofibers oriented in-plane direction. Nano energy 56, 1–892 (2019)
G. Wang, X. Huang, P. Jiang, Bio-inspired polydopamine coating as a facile approach to constructing polymer nanocomposites for energy storage. J. Mater. Chem. C 5, 12 (2017)
Q.G. Chi, T. Ma, Y. Zhang et al., Significantly enhanced energy storage density for poly (vinylidene fluoride) composites by induced PDA-coated 0.5Ba (Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 nanofibers. J. Mater. Chem. A 5, 32 (2017)
X. Huang, C. Kim, P. Jiang et al., Influence of aluminum nanoparticle surface treatment on the electrical properties of polyethylene composites. J. Appl. Phys. 105, 1 (2009)
J. Chen, X. Wang, X. Yu et al., High dielectric constant and low dielectric loss poly(vinylidene fluoride) nanocomposites via a small loading of two-dimensional Bi2Te3@Al2O3 hexagonal nanoplates. J. Mater. Chem. C 6, 2 (2018)
Q.G. Chi, X.B. Wang, C.H. Zhang et al., High energy storage density for poly (vinylidene fluoride) composites by introduced core–shell CaCu3Ti4O12@ Al2O3 nanofibers. ACS Sustain. Chem. Eng. 6, 7 (2018)
G. Wang, X. Huang, P. Jiang et al., Tailoring dielectric properties and energy density of ferroelectric polymer nanocomposites by high-k nanowires. ACS Appl. Mater. Interfaces. 7, 32 (2015)
Z. Pan, Q. Ding, L. Yao et al., Simultaneously enhanced discharge energy density and efficiency in nanocomposite film capacitors utilizing two-dimensional NaNbO3@Al2O3 platelets. J. Mater. Chem. C 11, 21 (2019)
J. Jiang, Z. Shen, J. Qian et al., Ultrahigh discharge efficiency in multilayered polymer nanocomposites of high energy density. Energy Storage Mater (2018). https://doi.org/10.1016/j.ensm.2018.09.013
J. Chen, Y. Wang, Q. Yuan et al., Multilayered ferroelectric polymer films incorporating low-dielectric-constant components for concurrent enhancement of energy density and charge–discharge efficiency. Nano Energy (2018). https://doi.org/10.1016/j.nanoen.2018.10.028
Q.G. Chi, T. Ma, Y. Zhang et al., Excellent energy storage of sandwich-structured PVDF-based composite at low electric field by introduction of the hybrid CoFe2O4@ BZT-BCT nanofibers. ACS Sustain. Chem. Eng. 6, 1 (2018)
J. Jiang, Z. Shen, X. Cai et al., Polymer nanocomposites with interpenetrating gradient structure exhibiting ultrahigh discharge efficiency and energy density. Adv. Energy Mater 9, 15 (2019)
S. Akram, Y. Yang, X. Zhong et al., Influence of nanolayer interface on space charge behavior and trap levels using polyimide sandwich structure. IEEE Trns. Dielectr. Electr. Insul. 24, 6 (2017)
C. Zou, D. Kushner, S. Zhang, Wide temperature polyimide/ZrO2 nanodielectric capacitor film with excellent electrical performance. Appl. Phys. Lett. 98, 8 (2011)
W. Sun, X. Lu, J. Jiang et al., Dielectric and energy storage performances of polyimide/BaTiO3 nanocomposites at elevated temperatures. J. Appl. Phys. 121, 24 (2017)
Y. Wu, J. Zha, Z. Yao et al., Thermally stable polyimide nanocomposite films from electrospun BaTiO3 fibers for high-density energy storage capacitors. RSC Adv. 5, 56 (2015)
J. Wang, Y. Long, Y. Sun et al., Enhanced energy density and thermostability in polyimide nanocomposites containing core-shell structured BaTiO3@SiO2 nanofibers. Appl. Surf. Sci. 426, 437 (2017)
X. Fang, X. Liu, Preparation and properties of thermostable well-functionalized graphene oxide/polyimide composite films with high dielectric constant, low dielectric loss and high strength via in situ polymerization. J. Mater. Chem. A 3, 10005 (2015)
Y. Chen, B. Lin, X. Zhang et al., Enhanced dielectric properties of amino-modified-CNT/polyimide composite films with a sandwich structure. J. Mater. Chem. A 2, 34 (2014)
S. Luo, J. Yu, S. Yu et al., Significantly enhanced electrostatic energy storage performance of flexible polymer composites by introducing highly insulating-ferroelectric microhybrids as fillers. Adv. Energy Mater. 9, 5 (2019)
R.J. Cohen, N. Gasiprong, J. Meaburn et al., Hydroxyl maser disc and outflow in the Orion-BN/KL region. Mon. Not. R. Astron. Soc. 367, 2 (2006)
Acknowledgements
This work is supported by the National Natural Science Foundation of China under Grant 51807042. The Youth Innovative Talents Training Plan for Regular Undergraduate Colleges of Heilongjiang Province under Grant UNPYSCT-2016157. Heilongjiang Province Postdoctoral Science Foundation, LBH-Z18099, and the Fundamental Research Foundation for Universities of Helongjiang Province (No. LGYC2018TD001 and No. LGYC2018JC020).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Chi, Q., Wang, B., Zhang, T. et al. Designing of surface modification and sandwich structure: effective routs to improve energy storage property in polyimide-based composite films. J Mater Sci: Mater Electron 30, 19956–19965 (2019). https://doi.org/10.1007/s10854-019-02362-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10854-019-02362-1