Skip to main content
Log in

Photopolymerization of TiO2-based hybrid materials: effect of nanoparticles loading and photosensitive 1D microstructures fabrication

  • Composites & nanocomposites
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

Hybrid materials, based on inorganic nanoblocks incorporated into polymer networks, are an important class of functional materials. Although the kinetic of the free-radical polymerization of neat polymers has been studied for many years, both theoretically and experimentally, studies devoted to the polymerization kinetics of nanocomposite materials are rare. In this study, photosensitive hybrids formed using poly(2-hydroxyethyl methacrylate) (pHEMA) and titanium dioxide (TiO2) nanoparticles functionalized with polymerizable ligands were considered. Their bulk UV-induced free-radical photopolymerization was investigated to evaluate the potential of pHEMA/TiO2 hybrids as a material of choice for the fabrication of micro-optical devices. The influence of the nanoparticle concentration and UV intensity on the polymerization kinetics, probed in situ by Raman spectroscopy, is discussed. A decrease in the initiation rate was observed, which was attributed to the UV absorption of TiO2 nanoparticles. This leads to a decrease in the propagation rate with an increase in nanoparticle concentration. Furthermore, a decrease in the maximum C=C conversion yield was observed when the nanoparticle concentration was increased. This was attributed to the formation of microgel regions around the nanoparticles, which prevented the polymer chains from bonding with surface ligands. Despite the lower conversion yield, we demonstrated the fabrication of one-dimension (1D) photoactive microstructures in pHEMA/TiO2 hybrids. The photochromic efficiency of the obtained structure was evaluated based on the reduction in silver (Ag) ions under UV irradiation. The results show that pHEMA/TiO2 hybrids can be considered as a prospective material for the realization of photosensitive microelements.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Figure 1
Figure 2
Figure 3
Figure 4.
Figure 5
Figure 6

Similar content being viewed by others

References

  1. Kickelbick G (ed) (2006) Hybrid materials: Synthesis, characterization and apllications. Wiley, Weinheim

    Google Scholar 

  2. Sanchez C, Belleville P, Popall M, Nicole L (2011) Applications of advanced hybrid organic-inorganic nanomaterials: from laboratory to market. Chem Soc Rev 40(2):696–753

    Article  CAS  Google Scholar 

  3. Nicole L, Laberty-Robert C, Rozes L, Sanchez C (2014) Hybrid materials science: a promised land for the integrative design of multifunctional materials. Nanoscale 6(12):6267–6292

    Article  CAS  Google Scholar 

  4. Sanchez C et al (2010) “Chimie douce”: a land of opportunities for the designed construction of functional inorganic and hybrid organic-inorganic nanomaterials. C R Chim 13(1):3–39

    Article  CAS  Google Scholar 

  5. Díez-Pascual AM (2019) Nanoparticle reinforced polymers. Polymers 11(4):625

    Article  Google Scholar 

  6. Sanchez C, Lebeau B, Chaput F, Boilot JP (2003) Optical Properties of functional hybrid organic-inorganic nanocomposites. Adv Mater 15(23):1969–1994

    Article  CAS  Google Scholar 

  7. Ovsianikov A et al (2008) Two-photon polymerization of hybrid sol-gel materials for photonics applications. Laser Chem 2008:7

    Article  Google Scholar 

  8. Malinauskas M, Farsari M, Piskarskas A, Juodkazis S (2013) Ultrafast laser nanostructuring of photopolymers: a decade of advances. Phys Rep 533(1):1–31

    Article  CAS  Google Scholar 

  9. Sakellari I et al (2010) Two-photon polymerization of titanium-containing sol–gel composites for three-dimensional structure fabrication. Appl Phys A 100(2):359–364

    Article  CAS  Google Scholar 

  10. Andrzejewska E (2016) Chapter 2 - free-radicaldical photopolymerization of multifunctional monomers. In: Baldacchini T (ed) Three-dimensional microfabrication using two-photon polymerization. William Andrew Publishing, Oxford, pp 62–81

    Chapter  Google Scholar 

  11. Achilias DS (2007) A review of modeling of diffusion controlled polymerization reactions. Macromol Theory Simul 16(4):319–347

    Article  CAS  Google Scholar 

  12. Cho J-D, Kim Y-B, Ju H-T, Hong J-W (2005) The effects of silica nanoparticles on the photocuring behaviors of UV-curable polyester acrylate-based coating systems. Macromol Res 13(4):362–365

    Article  CAS  Google Scholar 

  13. Cho J-D, Ju H-T, Hong J-W (2005) Photocuring kinetics of UV-initiated free-radical photopolymerizations with and without silica nanoparticles. J Polym Sci Part A Polym Chem 43(3):658–670

    Article  CAS  Google Scholar 

  14. Kaddami H, Pascault JP, Gerard JF (2004) Influence of the initiation rate on the polymerization kinetics of hydroxy ethyl methacrylate (HEMA) filled with HEMA-grafted silica preformed nanoparticles. Polym Eng Sci 44(7):1231–1239

    Article  CAS  Google Scholar 

  15. Kaddami H, Gerard JF, Hajji P, Pascault JP (1999) Silica-filled poly(HEMA) from hema/grafted SiO2 nanoparticles: polymerization kinetics and rheological changes. J Appl Polym Sci 73(13):2701–2713

    Article  CAS  Google Scholar 

  16. Achilias D, Siafaka P (2017) Polymerization kinetics of poly (2-hydroxyethyl methacrylate) hydrogels and nanocomposite materials. Processes 5(2):21

    Article  Google Scholar 

  17. Lin C et al (2018) Effects of surface groups on SiO2 nanoparticles on in situ solution polymerization: kinetics and mechanism. Ind Eng Chem Res 57(45):15280–15290

    CAS  Google Scholar 

  18. Demir MM, Memesa M, Castignolles P, Wegner G (2006) PMMA/zinc oxide nanocomposites prepared by in-situ bulk polymerization. Macromol Rapid Commun 27(10):763–770

    Article  CAS  Google Scholar 

  19. Michailidis M, Verros GD, Deliyanni EA, Andriotis EG, Achilias DS (2017) An experimental and theoretical study of butyl methacrylate in situ radical polymerization kinetics in the presence of graphene oxide nanoadditive. J Polym Sci Part A Polym Chem 55(8):1433–1441

    Article  CAS  Google Scholar 

  20. Verros GD, Achilias DS (2016) Toward the development of a mathematical model for the bulk in situ radical polymerization of methyl methacrylate in the presence of nano-additives. Can J Chem Eng 94(9):1783–1791

    Article  CAS  Google Scholar 

  21. Parola S, Julián-López B, Carlos LD, Sanchez C (2016) Optical properties of hybrid organic–inorganic materials and their applications. Adv Funct Mater 26(36):6506–6544

    Article  CAS  Google Scholar 

  22. Lebeau B, Innocenzi P (2011) Hybrid materials for optics and photonics. Chem Soc Rev 40(2):886–906

    Article  CAS  Google Scholar 

  23. Gorbovyi P et al (2011) Novel nanostructured pHEMA-TiO2 hybrid materials with efficient light-induced charge separation. Nanoscale 3(4):1807–1812

    Article  CAS  Google Scholar 

  24. Gorbovyi P, Uklein A, Traore M, Museur L, Kanaev A (2014) Formation of gel of preformed size-selected titanium-oxo-alkoxy nanoparticles: towards organic-inorganic hybrid material with efficient interfacial electron transfer. Mater Res Express 1(4):045039

    Article  CAS  Google Scholar 

  25. Gorbovyi P et al (2019) Alkoxysilane effect in hybrid material: a comparison of pHEMA-TiO2 and pMAPTMS-TiO2 nanoparticulate hybrids. Mater Res Bull 114:130–137

    Article  CAS  Google Scholar 

  26. Museur L et al (2012) Luminescence properties of pHEMA-TiO2 gels based hybrids materials. J Lumin 132(5):1192–1199

    Article  CAS  Google Scholar 

  27. Evlyukhin E et al (2018) Synthesis of organic–inorganic hybrids via a high-pressure-ramp process: the effect of inorganic nanoparticle loading on structural and photochromic properties. Nanoscale 10(47):22293–22301

    Article  CAS  Google Scholar 

  28. Evlyukhin E et al (2015) Laser assisted high pressure induced polymerization of 2-(hydroxyethyl) methacrylate. J Phys Chem B 119(8):3577–3582

    Article  CAS  Google Scholar 

  29. Evlyukhin E et al (2016) A new route for high-purity organic materials: high-pressure-ramp-induced ultrafast polymerization of 2-(hydroxyethyl)methacrylate. Sci Rep 5:18244

    Article  Google Scholar 

  30. Jia Z et al (2022) Polymerization initiation of pure 2-hydroxyethylmethacrylate under shock wave compression. New J Chem 46(19):9258–9263

    Article  CAS  Google Scholar 

  31. Kuznetsov AI et al (2009) Laser-induced photopatterning of organic–inorganic TiO2-based hybrid materials with tunable interfacial electron transfer. PCCP 11(8):1248–1257

    Article  CAS  Google Scholar 

  32. Uklein A, Gorbovyi P, Traore M, Museur L, Kanaev A (2013) Photo-induced refraction of nanoparticulate organic-inorganic TiO2-pHEMA hybrids. Opt Mater Express 3(5):533–545

    Article  CAS  Google Scholar 

  33. Farsari M, Chichkov BN (2009) Materials processing: two-photon fabrication. Nat Photon 3(8):450–452

    Article  CAS  Google Scholar 

  34. Do MT et al (2013) Submicrometer 3D structures fabrication enabled by one-photon absorption direct laser writing. Opt Express 21(18):20964–20973

    Article  Google Scholar 

  35. Azouani R et al (2007) Stability and growth of titanium-oxo-alkoxy TixOy(OiPr)z clusters. J Phys Chem C 111(44):16243–16248

    Article  CAS  Google Scholar 

  36. Odian G (2004) Principles of polymerization. Wiley, New York

    Book  Google Scholar 

  37. Lang M, Hirner S, Wiesbrock F, Fuchs P (2022) A Review on modeling cure kinetics and mechanisms of photopolymerization. Polymers 14(10):2074

    Article  CAS  Google Scholar 

  38. Luu TTH, Jia Z, Kanaev A, Museur L (2020) Effect of light intensity on the free-radical photopolymerization kinetics of 2-hydroxyethyl methacrylate: experiments and simulations. J Phys Chem B 124(31):6857–6866

    Article  CAS  Google Scholar 

  39. Andrzejewska E (2001) Photopolymerization kinetics of multifunctional monomers. Prog Polym Sci 26(4):605–665

    Article  CAS  Google Scholar 

  40. Tsagkalias IS, Achilias DS (2022) Role of functional groups in the monomer molecule on the radical polymerization in the presence of graphene oxide. Polymerization of hydroxyethyl acrylate under isothermal and non-isothermal conditions. Molecules 27(2):345

    Article  CAS  Google Scholar 

  41. Goodner MD, Lee HR, Bowman CN (1997) Method for determining the kinetic parameters in diffusion-controlled free-radical homopolymerizations. Ind Eng Chem Res 36(4):1247–1252

    Article  CAS  Google Scholar 

  42. Jockusch S et al (1997) A steady-state and picosecond pump-probe investigation of the photophysics of an acyl and a bis (acyl) phosphine oxide. J Am Chem Soc 119(47):11495–11501

    Article  CAS  Google Scholar 

  43. Morita S (2014) Hydrogen-bonds structure in poly(2-hydroxyethyl methacrylate) studied by temperature-dependent infrared spectroscopy. Front Chem 2:10

    Article  Google Scholar 

  44. Morita S, Kitagawa K, Ozaki Y (2009) Hydrogen-bond structures in poly(2-hydroxyethyl methacrylate): infrared spectroscopy and quantum chemical calculations with model compounds. Vib Spectrosc 51(1):28–33

    Article  CAS  Google Scholar 

  45. Jia Z et al (2012) Growth of silver nanoclusters on monolayer nanoparticulate titanium-oxo-alkoxy coatings. J Phys Chem C 116(32):17239–17247

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Contributions

TTHL contributed to investigation, formal analysis, data curation, visualization, and validation. ZJ contributed to investigation, data curation, visualization, validation, writing review, and editing. AK contributed to conceptualization, writing review, and editing. LM contributed to conceptualization, funding acquisition, supervision, validation, and writing of the original draft.

Corresponding author

Correspondence to L. Museur.

Ethics declarations

Conflict of interest

The authors declare they have no conflict of interest.

Additional information

Handling Editor: Gregory Rutledge.

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary Information

Below is the link to the electronic supplementary material.

Supplementary file1 (DOCX 282 KB)

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Luu, T.T.H., Jia, Z., Kanaev, A. et al. Photopolymerization of TiO2-based hybrid materials: effect of nanoparticles loading and photosensitive 1D microstructures fabrication. J Mater Sci 58, 1127–1138 (2023). https://doi.org/10.1007/s10853-022-08090-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-022-08090-y

Navigation