Abstract
This study is devoted to the development of new oxide materials and devices based on them for direct long-term production of electricity from ambient humidity, which can be used as an auxiliary power supply system for self-sufficient buildings. The simplest device, a tablet pressed from these powders, generates an electrical potential in the presence of a moisture gradient inside the sample. The output voltage level of the converter depends on the type of material and the porous structure of the converter. There is a dependence of the sign of the output voltage on the type of material, which can be related to the type and sign of the surface centers of the converter material particles. The main mechanism of the converter operation is the generation of the streaming potential during the movement of adsorbed moisture (water molecules) in the porous structure of the converter under the influence of the ambient air humidity gradient. An increase in converter thickness increases the generation time of the output voltage by up to several tens of hours, both with an increase and a decrease in the humidity level in the compartment. The results of this study will help to use a huge reservoir of low-potential energy contained in gaseous water molecules to generate "green" electricity.
Graphical abstract
Similar content being viewed by others
References
Chu S, Majumdar A (2012) Opportunities and challenges for a sustainable energy future. Nature 488:294–303. https://doi.org/10.1038/nature11475
Shen D, Duley WW, Peng P, Xiao M, Feng J, Liu L, Zou G, Zhou YN (2020) Moisture-enabled electricity generation: from physics and materials to self-powered applications. Adv Mater 32:2003722. https://doi.org/10.1002/adma.202003722
Zhao F, Cheng H, Zhang Z, Jiang L, Qu L (2015) Direct power generation from a graphene oxide film under moisture. Adv Mater 27:4351–4357. https://doi.org/10.1002/adma.201501867
Shen D, Xiao M, Zou G, Liu L, Duley WW, Zhou YN (2018) Self-powered wearable electronics based on moisture enabled electricity generation. Adv Mater 30:1705925. https://doi.org/10.1002/adma.201705925
Liu X, Gao H, Ward JE, Liu X, Yin B, Fu T, Chen J, Lovley DR, Yao J (2020) Power generation from ambient humidity using protein nanowires. Nature 578:550–554. https://doi.org/10.1038/s41586-020-2010-9
Liu J, Qi Y, Liu D, Dong D, Liu D, Li Z (2019) Moisture-enabled electricity generation from gradient polyoxometalates-modified sponge-like graphene oxide monolith. J Mater Sci 54:4831–4841. https://doi.org/10.1007/s10853-018-3183-6
Mao M, Yu K, Cao CF, Gong LX, Zhang GD, Zhao L, Song P, Gao JF, Tang LC (2022) Facile and green fabrication of flame-retardant Ti3C2Tx MXene networks for ultrafast, reusable and weather-resistant fire warning. Chem Eng J 427:131615. https://doi.org/10.1016/j.cej.2021.131615
Yang Y, Yin LC, Gong Y, Niu P, Wang JQ, Gu L, Chen X, Liu G, Wang L, Cheng HM (2018) An unusual strong visible-light absorption band in red anatase TiO2 photocatalyst induced by atomic hydrogen-occupied oxygen vacancies. Adv Mater 30:1704479. https://doi.org/10.1002/adma.201704479
Doroshkevich AS, Lyubchyk AI, Islamov AK, Turchenko VA, Zelenyak TY, Shylo AV, Balasoiu M, Saprykina AV et al (2017) Nonequilibrium chemo-electronic conversion of water on the nanosized YSZ: experiment and molecular dynamics modelling problem formulation. J Phys Conf Ser 848:012021. https://doi.org/10.1088/1742-6596/848/1/012021
Moià-Pol A, Rosselló-Batle B, Carmona C, Alorda B (2016) Net zero emissions for a seminar room in the University of Balearic Islands. RE&PQJ 14:432–435. https://doi.org/10.24084/repqj14.355
Danilenko I, Glazunov F, Konstantinova T, Volkova G, Burkhovetski V (2013) Effect of oxide nanofillers on fabrication, structure, and properties of zirconia-based composites. J Eur Ceram Soc 33:2321–2325. https://doi.org/10.1016/j.jeurceramsoc.2013.01.039
Zālīte I, Grase L, Lagzdiņa S, Rašmane D (2019) Porous ceramics from Al2O3 nanopowders. Key Eng Mater 850:273–278
Viazzi C, Bonino J, Ansart F, Barnabé A (2008) Structural study of metastable tetragonal YSZ powders produced via a sol-gel route. J Alloys Compd 452:377–383. https://doi.org/10.1016/j.jallcom.2006.10.155
Witz G, Shklover V, Steurer W, Bachegowda S, Bossmann H (2007) Phase evolution in Yttria-stabilized zirconia thermal barrier coatings studied by rietveld refinement of X-ray powder diffraction patterns. J Am Ceram Soc 90:2935–2940. https://doi.org/10.1111/j.1551-2916.2007.01785.x
Cao J, Liu F, Lin Q, Zhang Y (2008) Hydrothermal synthesis of xonotlite from carbide slag. Prog Nat Sci 18:1147–1153. https://doi.org/10.1016/j.pnsc.2008.01.036
Danilenko I, Konstantinova T, Pilipenko N, Volkova G, Glasunova V (2011) Estimation of agglomeration degree and nanoparticles shape of zirconia nanopowders. Part Part Syst Charact 28:13–18. https://doi.org/10.1002/ppsc.200800041
Pudipeddi M, Zannou E, Vasanthavada M, Dontabhaktuni A, Royce A, Joshi Y, Serajuddin A (2008) Measurement of surface ph of pharmaceutical solids: a critical evaluation of indicator dye-sorption method and its comparison with slurry pH method. J Pharm Sci 97:1831–1842. https://doi.org/10.1002/jps
Danchenko Yu, Kariev A, Andronov V, Cherkashina A, Lebedev V, Shkolnikova T, Burlutskyi O, Kosse A, Lutsenko Yu, Yavors’ka D (2020) A Research of chemical nature and surface properties of plant disperse fillers. East Eur J Enterp Technol 1:32–41. https://doi.org/10.15587/1729-4061.2020.193383
Gana K, Xub J, Gaic Y, Wud J, Lic S, Lua Y, Huoa W, Zhanga X, Yang J (2017) In-situ coagulation of yttria-stabilized zirconia suspension via dispersant hydrolysis using sodium tripolyphosphate. J Eur Ceram Soc 37:4868–4875. https://doi.org/10.1016/j.jeurceramsoc.2017.05.044
Xu J, Gan K, Yang M, Qu Y, Wu J, Yang J (2015) Direct coagulation casting of yttria-stabilized zirconia using magnesiumcitrate and glycerol diacetate. Ceram Int 41:5772–5778. https://doi.org/10.1016/j.ceramint.2014.12.163
Goyne KW, Zimmerman AR, Newalkar BL, Komarneni S, Brantley SL, Chorover J (2002) Surface charge of variable porosity Al2O3(s) and SiO2(s) adsorbents. J Porous Mater 9:243–256. https://doi.org/10.1023/A:1021631827398
Avci G, Akhlaghi O, Ustbas B, Ozbay C, Menceloglu YZ, Akbulut O (2016) A PCE-based rheology modifier allows machining of solid cast green bodies of alumina. Ceram Int 42:3757–3761. https://doi.org/10.1016/j.ceramint.2015.11.004
Arai Y (1996) Chemistry of powder production 1st edn. Chapman and Hall, London. Doi: https://doi.org/10.1007/978-94-009-1493-3
van der Heyden F, Stein D, Dekker C (2005) Streaming currents in a single nanofluidic channel. Phys Rev Lett 95:116104. https://doi.org/10.1103/PhysRevLett.95.116104
van der Heyden F, Stein D, Besteman K, Lemay SG, Dekker C (2006) Charge inversion at high ionic strength studied by streaming currents. Phys Rev Lett 96:224502. https://doi.org/10.1103/PhysRevLett.96.224502
Xiao Y, Shen D, Zou G, Wu A, Liu L, Duley W, Zhou Y (2019) Self-powered, flexible and remote-controlled breath monitor based on tio2 nanowire networks. Nanotechnology 30:325503. https://doi.org/10.1088/1361-6528/ab1b93
Kostiuchenko Z, Cui J, Lemay S (2020) Electrochemistry in micro- and nanochannels controlled by streaming potentials. J Phys Chem C 124:2656–2663. https://doi.org/10.1021/acs.jpcc.9b08584
Xue G, Xu Y, Ding T, Li J, Yin J, Fei W, Cao Y, Yu J, Yuan L, Gong L, Chen J, Deng S, Zhou J, Guo W (2017) Water-evaporation-induced electricity with nanostructured carbon materials. Nat Nanotechnol 12:317–321. https://doi.org/10.1038/nnano.2016.300
Ctibora P, Sedlacek J, Neufuss K (2003) Influence of chemical composition on dielectric properties of Al2O3 and ZrO2 plasma deposits. Ceram Int 29:527–532. https://doi.org/10.1016/S0272-8842(02)00197-9
Jbara A, Othaman Z, Saeed AH, M, (2017) Electronic and optical properties of γ- and θ-alumina by first principle calculations. Adv Sci Eng Med 9:287–293. https://doi.org/10.1166/asem.2017.2007
Hossain SKS, Roy PK (2018) Study of physical and dielectric properties of biowaste derived synthetic wollastonite. J Asian Ceram Soc 6:289–298. https://doi.org/10.1080/21870764.2018.1508549
Mohamed AO, Paleologos EK (2018) Fundamentals of geoenvironmental engineering understanding: soil, water, and pollutant interaction and transport, 1st edn. Elsevier Inc., Netherland
Dirksen C, Dasberg S (1993) Improved calibration of time domain reflectometry soil water content measurements. Soil Sci Soc Am J 57:660–667. https://doi.org/10.2136/sssaj1993.03615995005700030005x
Zeng Y, Grandner S, Oliveira CLP, Thunemann AF, Paris O, Pedersen JS, Klapp SHL, von Klitzing R (2011) Effect of particle size and Debye length on order parameters of colloidal silicas suspensions under confinement. Soft Matter 7:10899–10909. https://doi.org/10.1039/c1sm05971h
Acknowledgements
The authors are thankful the H2020-MSCA-RISE-2019 Program, project 871284 SSHARE for support of this work.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Handling Editor: M. Grant Norton.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Danilenko, I., Gorban, O., Shylo, A. et al. Humidity to electricity converter based on oxide nanoparticles. J Mater Sci 57, 8367–8380 (2022). https://doi.org/10.1007/s10853-021-06657-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-021-06657-9