Skip to main content
Log in

Organic thermoelectric thin films with large p-type and n-type power factor

  • Electronic materials
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

P- and n-type thermoelectric (TE) materials were prepared by using a layer-by-layer method. Assembled nanocomposites displayed high TE properties. For the p-type nanocomposites, polyaniline (PANi)/graphene-poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS)/PANi/carbon nanotubes (CNT)-PEDOT:PSS quadlayers (QL) were assembled by immersing a substrate alternately to aqueous solutions of these charged materials. Various concentrations of three types of CNT (single-walled, double-walled (DWNT), and multi-walled) and two different surface areas of graphene (300 and 750 m2 g−1) were investigated. The best QL films, assembled with graphene and DWNT, exhibit a power factor (PF = S2 σ) of 3050 µW m−1 K−2 at room temperature, which is among the highest values for a fully organic material. In an effort to improve TE properties in n-type organic thin films, hydrazine is introduced to the films in which DWNT, stabilized by polyethylenimine (PEI), is alternately deposited with graphene, stabilized by polyvinylpyrrolidone (PVP). After doping these films for 5 min with hydrazine, electrical conductivity and Seebeck coefficient significantly increase. An 80 DWNT-PEI/graphene-PVP bilayer film achieves a PF as high as 380 µW m−1 K−2 at room temperature, exhibiting a twofold improvement relative to that of un-doped films. In light of the growing interest in organic thermoelectric nanocomposites, this study provides an effective means to achieve high performance that will allow these unique materials to replace inorganic semiconductors in some applications.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8

Similar content being viewed by others

References

  1. Yergin D (2013) Energy transitions: past and future. In: Energy Vision January 2013, World Economic Forum, Industry Vision, Prepared in Partnership with IHS CERA (Cambridge Energy Research Associates)

  2. Jain CP (2007) Deciding the future: energy policy scenarios to 2050. World Energy Council, London, UK

  3. Zebarjadi M, Esfarjani K, Dresselhaus MS, Ren ZF, Chen G (2012) Perspectives on thermoelectrics: from fundamentals to device applications. Energy Environ Sci 5:5147–5162

    Google Scholar 

  4. Hochbaum AI, Chen R, Delgado RD, Liang W, Garnett EC, Najarian M, Majumdar A, Yang P (2008) Enhanced thermoelectric performance of rough silicon nanowires. Nature 451:16316–16317

    Google Scholar 

  5. Snyder GJ, Toberer E (2008) Complex thermoelectric materials. Nat Mater 7:105–114

    CAS  Google Scholar 

  6. Weathers A, Khan ZU, Brooke R, Evans D, Pettes MT, Andreasen JW, Crispin X, Shi L (2015) Significant electronic thermal transport in the conducting polymer poly(3,4-ethylenedioxythiophene). Adv Mater 27:2101–2106

    CAS  Google Scholar 

  7. Liu J, Wang X, Li D, Coates NE, Segalman RA, Cahill DG (2015) Thermal conductivity and elastic constants of PEDOT:PSS with high electrical conductivity. Macromolecules 48:585–591

    CAS  Google Scholar 

  8. Bounioux C, Dıaz-Chao P, Campoy-Quiles M, MartınGonzalez MS, Goni AR, Yerushalmi-Rozene R, Muller C (2013) Thermoelectric composites of poly3-hexylthiophene and carbon nanotubes with a large power factor. Energy Environ Sci 6:918–925

    CAS  Google Scholar 

  9. He M, Qiu F, Lin Z (2013) Towards high-performance polymer-based thermoelectric materials. Energy Environ Sci 6:1352–1361

    Google Scholar 

  10. Kim F, Kwon B, Eom Y, Lee JE, Park S, Jo S, Park SH, Kim BS, Im HJ, Lee H, Min TS, Kim T, Chae HG, King WP, Son JS (2018) 3D printing of shape-conformable thermoelectric materials using all-inorganic Bi2Te3-based inks. Nat Energy 3:301–309

    CAS  Google Scholar 

  11. Hsu KF, Guo S, Loo F, Chen W, Dyck JS, Uher C, Hogan T, Polychroniadis EK, Kanatzidis MG (2004) Cubic AgPbmSbTe2+m: bulk thermoelectric materials with high figure of merit. Science 303:818–821

    CAS  Google Scholar 

  12. Wei Q, Mukaida M, Kirihara K, Naitoh Y, Ishida T (2014) Thermoelectric power enhancement of PEDOT:PSS in high-humidity conditions. Appl Phys Express 7:031601

    Google Scholar 

  13. Blackburn L, Ferguson AJ, Cho C, Grunlan JC (2018) Carbon-nanotube-based thermoelectric materials and devices. Adv Mater 30:1704386

    Google Scholar 

  14. Serrano-Claumarchirant J, Culebras M, Muñoz-Espí R, Cantarero A, Gómez CM, Collins MN (2019) PEDOT thin films with n-type thermopower. ACS Appl Energy Mater 3:861–867

    Google Scholar 

  15. Zhang Q, Sun Y, Xu W, Zhu D (2014) Organic thermoelectric materials: emerging green energy materials converting heat to electricity directly and efficiently. Adv Mater 26:6829–6851

    CAS  Google Scholar 

  16. Yuan D, Huang D, Zhang C, Zou Y, Di CA, Zhu X, Zhu D (2017) Efficient solution-processed n-Type small-Molecule Thermoelectric materials achieved by precisely regulating energy level of organic dopants. ACS Appl Mater Interfaces 9:28795–28801

    CAS  Google Scholar 

  17. Fujugaya T (2019) Development of thermoelectric conversion materials using carbon nanotube sheets. Bull Chem Soc Jpn 92:400–408

    Google Scholar 

  18. Zhang Y, Heo Y-J, Park M, Park S-J (2019) Recent advances in organic thermoelectric materials: principle mechanisms and emerging carbon-based green energy materials. Polymers 11:167

    CAS  Google Scholar 

  19. Decher G, Schlenoff JB (2012) Multilayer thin films: sequential assembly of nanocomposite materials. Wiley, Weinheim, Germany

    Google Scholar 

  20. Kotov NA (1999) Layer-by-layer self-assembly: the contribution of hydrophobic interactions. Nanostruct Mater 12:789–796

    Google Scholar 

  21. Rydzek G, Ji Q, Li M, Schaaf P, Hill JP, Boulmedais F, Aria K (2015) Electrochemical nanoarchitectonics and layer-by-layer assembly: from basics to future. Nano Today 10:138–167

    CAS  Google Scholar 

  22. Ariga K, Ahn E, Park M, Kim B-S (2019) Layer-by-layer assembly: recent progress from layered assemblies to layered nanoarchitectonics. Chem Asian J 14:2553–2566

    CAS  Google Scholar 

  23. Lee H, Mensire R, Cohen RE, Rubner MF (2012) Strategies for hydrogen bonding based layer-by-layer assembly of poly (vinyl alcohol) with weak polyacids. Macromolecules 45:347–355

    CAS  Google Scholar 

  24. Lee SW, Kim BS, Chen S, Shao-Horn Y, Hammond PT (2009) Layer-by-layer assembly of all carbon nanotube ultrathin films for electrochemical applications. J Am Chem Soc 131:671–679

    CAS  Google Scholar 

  25. Cho C, Stevens B, Hsu JH, Bureau R, Hagen DA, Regev O, Yu C, Grunlan JC (2015) Completely organic multilayer thin film with thermoelectric power factor rivaling inorganic tellurides. Adv Mater 27:2996–3001

    CAS  Google Scholar 

  26. Cho C, Wallace KL, Tzeng P, Hsu JH, Yu C, Grunlan JC (2016) Outstanding Low Temperature Thermoelectric power factor from completely organic thin films enabled by multidimensional conjugated nanomaterials. Adv Energy Mater 6:1502168

    Google Scholar 

  27. Cho C, Culebras M, Wallace KL, Song Y, Holder K, Hsu JH, Yu C, Grunlan JC (2016) Stable n-type thermoelectric multilayer thin films with high power factor from carbonaceous nanofillers. Nano Energy 28:426–432

    CAS  Google Scholar 

  28. Cheung JH, Stockton WB, Rubner MF (1997) Molecular-level processing of conjugated polymers. 3 Layer-by-Layer manipulation of polyaniline via electrostatic interactions. Macromolecules 30:2712–2716

    CAS  Google Scholar 

  29. Smiths FM (1958) Measurement of sheet resistivities with the four-point probe. Bell Labs Tech J 37:711–718

    Google Scholar 

  30. Ma T, Liu Z, Wen J, Gao Y, Ren X, Chen H, Jin C, Ma X-L, Xu N, Cheng HM, Ren W (2017) Tailoring the thermal and electrical transport properties of graphene films by grain size engineering. Nat Commun 8:14486

    CAS  Google Scholar 

  31. Choi Y, Kim Y, Park SG, Kim YG, Sung BJ, Jang SY, Kim W (2011) Effect of the carbon nanotube type on the thermoelectric properties of CNT/Nafion nanocomposites. Org Electron 12:2120–2125

    CAS  Google Scholar 

  32. Yao Q, Wang Q, Qang L, Chen L (2014) Abnormally enhanced thermoelectric transport properties of SWNT/PANI hybrid films by the strengthened PANI molecular ordering. Energy Environ Sci 7:3801–3807

    CAS  Google Scholar 

  33. Moriarty GP, De S, King PJ, Khan U, Via M, King JA, Coleman JN, Grunlan JC (2013) Thermoelectric behavior of organic thin film nanocomposites. Polym Sci Part B: Polym Phys 51:119–123

    CAS  Google Scholar 

  34. Wei JQ, Zhu HW, Jiang B, Ci IJ, Wu DH (2003) Electronic properties of double-walled carbon nanotube films. Carbon 41:2495–2500

    CAS  Google Scholar 

  35. Ryu Y, Reeman D, Yu C (2011) High electrical conductivity and n-type thermopower from double-/single-wall carbon nanotubes by manipulating charge interactions between nanotubes and organic/inorganic nanomaterials. Carbon 49:4745–4751

    CAS  Google Scholar 

  36. Nakashima T, Zhu J, Qin M, Hoa S, Kotov NA (2010) Polyelectrolyte and carbon nanotube multilayers made from ionic liquid solutions. Nanoscale 2:2084–2090

    CAS  Google Scholar 

  37. Syama S, Mohanan PV (2019) Comprehensiveapplicationofgraphene:emphasisonbiomedicalconcerns. Nano-Micro Lett 11:6

    CAS  Google Scholar 

  38. Yan H, Kou K (2014) Enhanced thermoelectric properties in polyaniline composites with polyaniline-coated carbon nanotubes. J Mater Sci 49:1222–1228. https://doi.org/10.1007/s10853-013-7804-9

    Article  CAS  Google Scholar 

  39. Yao Q, Wang Q, Wang L, Wang Y, Sun J, Zeng H, Jin Z, Huang X, Chen L (2014) The synergic regulation of conductivity and Seebeck coefficient in pure polyaniline by chemically changing the ordered degree of molecular chains. J Mater Chem A 2:2634–2640

    CAS  Google Scholar 

  40. Jo S, Choo S, Kim F, Heo SH, Son JS (2018) Ink processing for thermoelectric materials and power-generating devices. Adv Mater 31:1804930

    Google Scholar 

  41. Zhao Y, Guo Y, Liu Y (2013) Recent advances in n-type and ambipolar organic field-effect transistors. Adv Mater 25:5372–5391

    CAS  Google Scholar 

  42. Nonoguchi Y, Nakano M, Murayama T, Hagino H, Hama S, Miyazaki K, Matsubara R, Nakamura M, Kawai T (2016) Simple salt-coordinated n-type nanocarbon materials stable in air. Adv Funct Mater 26:3021–3028

    CAS  Google Scholar 

  43. Mistry KS, Larsen BA, Bergeson JD, Barnes TM, Teeter G, Engtrakul C, Blackburn JL (2011) n-Type transparent conducting films of small molecule and polymer amine doped single-walled carbon nanotubes. ACS Nano 5:3714–3723

    CAS  Google Scholar 

  44. Nonoguchi Y, Ohashi K, Kanazawa R, Ashiba K, Hata K, Nakagawa T, Adachi C, Tanase T, Kawai T (2013) Systematicconversionofsinglewalledcarbonnanotubesinton-typethermoelectricmaterialsbymoleculardopants. Sci Rep 3:3344

    Google Scholar 

  45. Lee WJ, Maiti UN, Lee JM, Lim J, Han TH, Kim SO (2014) Nitrogen-dopedcarbonnanotubesandgraphenecompositestructuresforenergyandcatalyticapplications. Chem Commun 50:6818–6830

    CAS  Google Scholar 

  46. Kim SL, Choi K, Tazebay A, Yu C (2014) Flexible power fabrics made of carbon nanotubes for harvesting thermoelectricity. ACS Nano 8:2377–2386

    CAS  Google Scholar 

  47. Wu G, Zhang ZG, Li Y, Gao C, Wang X, Chen G (2017) Exploring high-performance n-type thermoelectric composites using amino-substituted rylene dimides and carbon nanotubes. ACS Nano 11:5746–5752

    CAS  Google Scholar 

  48. Song Y, Tzeng P, Grunlan JC (2016) Super oxygen and improved water vapor barrier of polypropylene film with polyelectrolyte multilayer nanocoatings. Macromol Rapid Commun 37:963–968

    CAS  Google Scholar 

  49. Stevens B, Dessiatova E, Hagen DA, Todd AD, Todd CW, Grunlan JC (2014) Low-temperature thermal reduction of graphene oxide nanobrick walls: Unique combination of high gas barrier and low resistivity in fully organic polyelectrolyte multilayer thin films. ACS Appl Mater Interfaces 6:9942–9945

    CAS  Google Scholar 

Download references

Acknowledgements

The authors acknowledge the Texas A&M Engineering Experiment Station for infrastructural support of this work.

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Chungyeon Cho or Jaime C. Grunlan.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Additional information

Handling Editor: Gregory Rutledge.

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Below is the link to the electronic supplementary material.

Supplementary file1 (DOCX 5452 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Cho, C., Song, Y., Hsu, JH. et al. Organic thermoelectric thin films with large p-type and n-type power factor. J Mater Sci 56, 4291–4304 (2021). https://doi.org/10.1007/s10853-020-05520-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-020-05520-7

Navigation