Skip to main content
Log in

Lithium-ion battery fiber constructed by diverse-dimensional carbon nanomaterials

  • Energy materials
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

Graphene fibers are supposed to be ideal electrodes for fiber-shaped lithium-ion batteries. However, a big challenge remains in how to bring effectively the remarkable properties of graphene onto macroscopic graphene fibers. Here, the assembly of 2D reduced graphene oxides is coordinated by 1D carbon nanotubes resulting in a novel composite fiber. A brick–bridge network with high alignment, optimal porosity and low junction contact resistance is formed, in which reduced graphene oxides serve as the brick and carbon nanotubes as the bridge. Consequently, the composite fiber provides a fast, robust and massive transport network both for electrons and Li-ions. A large specific capacity of 522 mAh g−1 at 50 mA g−1 is achieved. Moreover, high retentions of 143% and 72% are obtained after 800 cycles at 500 mA g−1 and when current density is increased from 50 to 500 mA g−1, respectively.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6

Similar content being viewed by others

References

  1. Chan CK, Peng H, Liu G, McIlwrath K, Zhang XF, Huggins RA, Cui Y (2007) High-performance lithium battery anodes using silicon nanowires. Nat Nanotechnol 3:31–35

    Article  Google Scholar 

  2. Zhao J, Zhou G, Yan K et al (2017) Air-stable and freestanding lithium alloy/graphene foil as an alternative to lithium metal anodes. Nat Nanotechnol 12:993–999

    Article  CAS  Google Scholar 

  3. Choi S, T-w Kwon, Coskun A, Choi JW (2017) Highly elastic binders integrating polyrotaxanes for silicon microparticle anodes in lithium ion batteries. Science 357:279–283

    Article  CAS  Google Scholar 

  4. Ani MH, Kamarudin MA, Ramlan AH, Ismail E, Sirat MS, Mohamed MA, Azam MA (2018) A critical review on the contributions of chemical and physical factors toward the nucleation and growth of large-area graphene. J Mater Sci 53:7095–7111. https://doi.org/10.1007/s10853-018-1994-0

    Article  CAS  Google Scholar 

  5. Ambrosi A, Chua CK, Bonanni A, Pumera M (2014) Electrochemistry of graphene and related materials. Chem Rev 114:7150–7188

    Article  CAS  Google Scholar 

  6. Sun Y, Wu Q, Shi G (2011) Graphene based new energy materials. Energy Environ Sci 4:1113–1132

    Article  CAS  Google Scholar 

  7. Hu Y, Li X, Wang J, Li R, Sun X (2013) Free-standing graphene–carbon nanotube hybrid papers used as current collector and binder free anodes for lithium ion batteries. J Power Sources 237:41–46

    Article  CAS  Google Scholar 

  8. Ai W, Luo Z, Jiang J et al (2014) Nitrogen and sulfur codoped graphene: multifunctional electrode materials for high-performance Li-ion batteries and oxygen reduction reaction. Adv Mater 26:6186–6192

    Article  CAS  Google Scholar 

  9. Li X, Hu Y, Liu J, Lushington A, Li R, Sun X (2013) Structurally tailored graphene nanosheets as lithium ion battery anodes: an insight to yield exceptionally high lithium storage performance. Nanoscale 5:12607–12615

    Article  CAS  Google Scholar 

  10. Wang X, Lu X, Liu B, Chen D, Tong Y, Shen G (2014) Flexible energy-storage devices: design consideration and recent progress. Adv Mater 26:4763–4782

    Article  CAS  Google Scholar 

  11. Li L, Wu Z, Yuan S, Zhang X-B (2014) Advances and challenges for flexible energy storage and conversion devices and systems. Energy Environ Sci 7:2101–2122

    Article  CAS  Google Scholar 

  12. Xie Q, Zhao P, Wu S, Zhang Y (2017) Flexible carbon@graphene composite cloth for advanced lithium-sulfur batteries and supercapacitors with enhanced energy storage capability. J Mater Sci 52:13478–13489. https://doi.org/10.1007/s10853-017-1451-5

    Article  CAS  Google Scholar 

  13. Kwon YH, Woo S-W, Jung H-R et al (2012) Cable-type flexible lithium ion battery based on hollow multi-helix electrodes. Adv Mater 24:5192–5197

    Article  CAS  Google Scholar 

  14. Lu L, Hu Y, Dai K (2017) The advance of fiber-shaped lithium ion batteries. Mater Today Chem 5:24–33

    Article  Google Scholar 

  15. Lv T, Yao Y, Li N, Chen T (2016) Wearable fiber-shaped energy conversion and storage devices based on aligned carbon nanotubes. Nano Today 11:644–660

    Article  CAS  Google Scholar 

  16. Lee S-Y, Choi K-H, Choi W-S, Kwon YH, Jung H-R, Shin H-C, Kim JY (2013) Progress in flexible energy storage and conversion systems, with a focus on cable-type lithium-ion batteries. Energy Environ Sci 6:2414–2423

    Article  CAS  Google Scholar 

  17. Lee J-G, Kwon Y, Ju J-Y, Choi S, Kang Y, Yu W-R, Kim DW (2017) Fiber electrode by one-pot wet-spinning of graphene and manganese oxide nanowires for wearable lithium-ion batteries. J Appl Electrochem 47:865–875

    Article  CAS  Google Scholar 

  18. Hoshide T, Zheng Y, Hou J et al (2017) Flexible lithium-ion fiber battery by the regular stacking of two-dimensional titanium oxide nanosheets hybridized with reduced graphene oxide. Nano Lett 17:3543–3549

    Article  CAS  Google Scholar 

  19. Xu Z, Gao C (2011) Graphene chiral liquid crystals and macroscopic assembled fibres. Nat Commun 2:571. https://doi.org/10.1038/ncomms1583

    Article  CAS  Google Scholar 

  20. Xiang C, Behabtu N, Liu Y et al (2013) Graphene nanoribbons as an advanced precursor for making carbon fiber. ACS Nano 7:1628–1637

    Article  CAS  Google Scholar 

  21. Tian Q, Xu Z, Liu Y et al (2017) Dry spinning approach to continuous graphene fibers with high toughness. Nanoscale 9:12335–12342

    Article  CAS  Google Scholar 

  22. Yu D, Goh K, Wang H et al (2014) Scalable synthesis of hierarchically structured carbon nanotube-graphene fibres for capacitive energy storage. Nat Nanotechnol 9:555–562

    Article  CAS  Google Scholar 

  23. Gu M, Ko S, Yoo S, Lee E, Min SH, Park S, Kim B-S (2015) Double locked silver-coated silicon nanoparticle/graphene core/shell fiber for high-performance lithium-ion battery anodes. J Power Sources 300:351–357

    Article  CAS  Google Scholar 

  24. Li Y, Lv X, Lu J, Li J (2010) Preparation of SnO2-nanocrystal/graphene-nanosheets composites and their lithium storage ability. J Phys Chem C 114:21770–21774

    Article  CAS  Google Scholar 

  25. Park JH, Moon J, Han S et al (2017) Formation of stable solid–electrolyte interphase layer on few-layer graphene-coated silicon nanoparticles for high-capacity Li-ion battery anodes. J Phys Chem C 121:26155–26162

    Article  Google Scholar 

  26. Liu S, Xu J, Zhu J et al (2017) Leaf-inspired interwoven carbon nanosheet/nanotube homostructures for supercapacitors with high energy and power densities. J Mater Chem A 5:19997–20004

    Article  CAS  Google Scholar 

  27. Lipomi DJ, Vosgueritchian M, Tee BCK, Hellstrom SL, Lee JA, Fox CH, Bao Z (2011) Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes. Nat Nanotechnol 6:788–792

    Article  CAS  Google Scholar 

  28. Mao L-B, Gao H-L, Yao H-B et al (2016) Synthetic nacre by predesigned matrix-directed mineralization. Science 354:107–110

    Article  CAS  Google Scholar 

  29. Kang C, Cao D, Liu Y et al (2018) High loading carbon nanotubes deposited onto porous nickel yarns by solution imbibition as flexible wire-shaped supercapacitor electrodes. J Energy Chem 27:836–842

    Article  Google Scholar 

  30. Zhao M, Liu X, Zhang Q, Tian G, Huang J, Zhu W, Wei F (2012) Graphene/single-walled carbon nanotube hybrids: one-step catalytic growth and applications for high-rate Li-S batteries. ACS Nano 6:10759–10769

    Article  CAS  Google Scholar 

  31. Guo Z, Wang J, Wang F, Zhou D, Xia Y, Wang Y (2013) Leaf-like graphene oxide with a carbon nanotube midrib and its application in energy storage devices. Adv Funct Mater 23:4840–4846

    CAS  Google Scholar 

  32. Cheng H, Dong Z, Hu C et al (2013) Textile electrodes woven by carbon nanotube-graphene hybrid fibers for flexible electrochemical capacitors. Nanoscale 5:3428–3434

    Article  CAS  Google Scholar 

  33. Shin MK, Lee B, Kim SH et al (2012) Synergistic toughening of composite fibres by self-alignment of reduced graphene oxide and carbon nanotubes. Nat Commun 3:650. https://doi.org/10.1038/ncomms1661

    Article  CAS  Google Scholar 

  34. Sun H, You X, Deng J, Chen X, Yang Z, Ren J, Peng H (2014) Novel graphene/carbon nanotube composite fibers for efficient wire-shaped miniature energy devices. Adv Mater 26:2868–2873

    Article  CAS  Google Scholar 

  35. Hummers WS, Offeman RE (1958) Preparation of graphitic oxide. J Am Chem Soc 80:1339–1339. https://doi.org/10.1021/ja01539a017

    Article  CAS  Google Scholar 

  36. DongyunWan CY, Lin Tianquan, Tang Yufeng, Zhou Mi, Zhong Yajuan, Huang Fuqiang, Lin Jianhua (2012) Low-temperature aluminum reduction of graphene oxide, electrical properties, surface wettability, and energy storage applications. ACS Nano 6:9068–9078

    Article  Google Scholar 

  37. Niu Z, Chen J, Hng HH, Ma J, Chen X (2012) A leavening strategy to prepare reduced graphene oxide foams. Adv Mater 24:4144–4150

    Article  CAS  Google Scholar 

  38. Choi JW, McDonough J, Jeong S, Yoo JS, Chan CK, Cui Y (2010) Stepwise nanopore evolution in one-dimensional nanostructures. Nano Lett 10:1409–1413

    Article  CAS  Google Scholar 

  39. Xu Y, Wu Q, Sun Y, Bai H, Shi G (2010) Three-dimensional self-assembly of graphene oxide and DNA into multifunctional hydrogels. ACS Nano 4:7358–7362

    Article  CAS  Google Scholar 

  40. Sahoo M, Ramaprabhu S (2015) Enhanced electrochemical performance by unfolding a few wings of graphene nanoribbons of multiwalled carbon nanotubes as an anode material for Li ion battery applications. Nanoscale 7:13379–13386

    Article  CAS  Google Scholar 

  41. Han D-D, Zhang Y-L, Jiang H-B et al (2015) Moisture-responsive graphene paper prepared by self-controlled photoreduction. Adv Mater 27:332–338

    Article  CAS  Google Scholar 

  42. Wu Z-S, Winter A, Chen L, Sun Y, Turchanin A, Feng X, Muellen K (2012) Three-dimensional nitrogen and boron co-doped graphene for high-performance all-solid-state supercapacitors. Adv Mater 24:5130–5135

    Article  CAS  Google Scholar 

  43. Ai W, Jiang J, Zhu J et al (2015) Supramolecular polymerization promoted in situ fabrication of nitrogen-doped porous graphene sheets as anode materials for Li-ion batteries. Adv Energy Mater 5:1500559. https://doi.org/10.1002/aenm.201500559

    Article  CAS  Google Scholar 

  44. Jeon I-Y, Ju MJ, Xu J et al (2015) Edge-fluorinated graphene nanoplatelets as high performance electrodes for dye-sensitized solar cells and lithium ion batteries. Adv Funct Mater 25:1170–1179

    Article  CAS  Google Scholar 

  45. Zuo Z, Kim TY, Kholmanov I, Li H, Chou H, Li Y (2015) Ultra-light hierarchical graphene electrode for binder-free supercapacitors and lithium-ion battery anodes. Small 11:4922–4930

    Article  CAS  Google Scholar 

  46. Weng W, Lin H, Chen X et al (2014) Flexible and stable lithium ion batteries based on three-dimensional aligned carbon nanotube/silicon hybrid electrodes. J Mater Chem A 2:9306–9312

    Article  CAS  Google Scholar 

  47. Wang G, Shen X, Yao J, Park J (2009) Graphene nanosheets for enhanced lithium storage in lithium ion batteries. Carbon 47:2049–2053

    Article  CAS  Google Scholar 

  48. Weng W, Wu Q, Sun Q et al (2015) Failure mechanism in fiber-shaped electrodes for lithium-ion batteries. J Mater Chem A 3:10942–10948

    Article  CAS  Google Scholar 

  49. Tang H, Xia XH, Zhang YJ, Tong YY, Wang XL, Gu CD, Tu JP (2015) Binary conductive network for construction of Si/Ag nanowires/rGO integrated composite film by vacuum-filtration method and their application for lithium ion batteries. Electrochim Acta 180:1068–1074

    Article  CAS  Google Scholar 

  50. Ye M, Hu C, Lv L, Qu L (2016) Graphene-winged carbon nanotubes as high-performance lithium-ion batteries anode with super-long cycle life. J Power Sources 305:106–114

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This work was supported by the National Natural Science Foundation of China (51673038, 51603038 and 51703027), Science and Technology Commission of Shanghai Municipality (16JC1400700), Program for Changjiang Scholars and Innovative Research Team in University (IRT16R13), and the Fundamental Research Funds for the Central Universities, DHU Distinguished Young Professor Program.

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Wei Weng or Meifang Zhu.

Electronic supplementary material

Below is the link to the electronic supplementary material.

Supplementary material 1 (DOCX 4374 kb)

Supplementary material 2 (MP4 18738 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhang, Y., Weng, W., Yang, J. et al. Lithium-ion battery fiber constructed by diverse-dimensional carbon nanomaterials. J Mater Sci 54, 582–591 (2019). https://doi.org/10.1007/s10853-018-2813-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-018-2813-3

Keywords

Navigation