Skip to main content

Advertisement

SpringerLink
Log in

Optimal Control of Screw In-pipe Inspection Robot with Controllable Pitch Rate

  • Published:
Journal of Intelligent & Robotic Systems Aims and scope Submit manuscript

Abstract

A Steerable in-pipe inspection robot is designed in this paper and its optimal control based on linear quadratic regulator (LQR) approach is performed subject to input minimization. In-pipe inspection robots are necessary mobile robots in order to investigate the pipelines. Most of the in-pipe inspection robots are limited to move with a constant pitch rate. An in pipe inspection robot is proposed in this paper which is based on screw locomotion and its steering angle is also controllable in order to handle the pitch rate of the movement and bypass the probable obstacles. Since the proposed robot is multivariable with more than one controlling input, minimizing its control inputs are extremely useful. The goal of this paper is to extract the dynamic model of the mentioned steerable screw in-pipe inspection robot and controlling it within a predefined trajectory in an optimal way. The proper mechanism is designed and its related kinematics and kinetics are derived. Afterwards the objective function is defined based on minimizing the controlling input and maximizing the accuracy of movement. The nonlinear state space is linearized around its operating point and optimization is implemented using Linear Quadratic Regulator (LQR). The efficiency of the designed robot and controller and the optimality of its controlling procedure are investigated by the aid of MATLAB simulation and comparative analysis. It is proved that the designed robot is able to move with controllable pitch rate and acceptable accuracy while the obstacles can be avoided and the energy consumption is optimized. At the end the validity of modeling and simulation in MATLAB is also verified by modeling the robot in ADAMS and comparing the results.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Peng, Z., Yang, S., Wen, G., Rahmani, A., Yu, Y.: Adaptive Distributed Formation Control for Multiple non-Holonomic wheeled mobile robots. Neurocomputing 173, 1485–1494 (2015)

    Article  Google Scholar 

  2. Scaglia, G., Serrano, E., Rosales, A., Albertos, P.: Linear interpolation based controller design for trajectory tracking under uncertainties: application to mobile robots. Control. Eng. Pract. 45, 123–132 (2015)

    Article  Google Scholar 

  3. Takahashi, M., Hayashi, I., Iwatsuki, N., Suzumori, K.: The Development of an In-Pipe Micro robot Applying the Motion of an Earthworm, Micro Machine and Human Science (1994)

  4. Zagler, A., Pfeiffer, F.: (MORITZ) A Pipe Crawler for Tube Junctions. Robot. Autom. 3, 2954–2959 (2003)

    Google Scholar 

  5. Kim, J.H., Sharma, G., Iyengar, S.S.: FAMPER: A Fully Autonomous Mobile Robot for Pipeline Exploration, Industrial Technology (ICIT), pp. 517–523 (2010)

  6. Harish, P., Venkateswarlu, V.: Design and Motion Planning of Indoor Pipeline Inspection Robot, International Journal of Innovative Technology and Exploring Engineering (IJITEE), vol. 3 (2013)

  7. Suzumori, K., Miyagawa, T., Kimura, M., Hasegawa, Y.: Micro Inspection Robot for 1-in Pipes. Mechatronics 4, 286–292 (1999)

    Article  Google Scholar 

  8. Zhang, Y., Yan, G.: In-pipe Inspection Robot With Active Pipe-Diameter Adaptability and Automatic Tractive Force Adjusting. Mech. Mach. Theory 42, 1618–1631 (2007)

    Article  MATH  Google Scholar 

  9. Roh, S., Choi, H.R.: Differential-Drive In-Pipe Robot for Moving Inside Urban Gas Pipelines. Robotics 21, 1–17 (2005)

    Google Scholar 

  10. Nayak, A., Pradhan, S.K.: Design of a New In-Pipe Inspection Robot. Procedia Eng. 97, 2081–2091 (2014)

    Article  Google Scholar 

  11. Li, P., Ma, S., Li, B., Wang, Y.: Multifunctional Mobile Units With a Same Platform for In-Pipe Inspection Robots, Intelligent Robots and Systems, pp. 2643–2648 (2008)

  12. Kakogawa, A., Ma, S.: Mobility of an In-pipe Robot With Screw Drive Mechanism Inside Curved Pipes, Robotics and Biomimetics (ROBIO), pp. 1530–1535 (2010)

  13. Yanheng, Z., Mingwei, Z., Hanxu, S., Qingxuan, J.: Design and Motion Analysis of a Flexible Squirm Pipe Robot, Intelligent System Design and Engineering Application, pp. 527–531 (2010)

  14. Pyrkin, A.A., Bobtsov, A.A., Kolyubin, A., Faronov, M.V., Borisov, O.I., Gromov, V.S., Vlasov, M.N., Nikolaev, A.: Simple Robust and Adaptive Tracking Control for Mobile Robots. IFAC-PapersOnLine 48, 143–149 (2015)

    Article  Google Scholar 

  15. Pitanga, J.R., Araújo, H.X., Conceição, A.G.S., Oliveira, G.H.C.: Stable Model-Based Predictive Control for Wheeled Mobile Robots using Linear Matrix Inequalities. IFAC-PapersOnLine 48, 33–38 (2015)

    Article  Google Scholar 

  16. Heidari, A.H., Mehrandezh, M., Paranjape, R., Najjaran, H.: Dynamic Analysis and Human Analogous Control of a Pipe Crawling Robot, Intelligent Robots and Systems, pp. 733–740 (2009)

  17. Zhang, H., Gong, J., Jiang, Y., Xiong, G., Chen, H.: An Iterative Linear Quadratic Regulator Based Trajectory Tracking Controller for Wheeled Mobile Robot. J. Zhejiang University Sci. C Comput. Elect. 13, 593–600 (2012)

    Article  Google Scholar 

  18. Lang, H., Wang, Y.: Visual Servoing With LQR Control for Mobile Robot, Control and Automation (ICCA), pp. 317–321 (2010)

  19. Kakogawa, A., Ma, S.: Mobility of an in-pipe robot with screw drive mechanism inside curved pipes, Robotics and Biomimetics (ROBIO), pp. 1530–1535 (2010)

  20. Korayem, M.H.: Maximum DLCC of Spatial Cable Robot for a Predefined TrajectoryWithin the Workspace Using Closed Loop Optimal Control Approach. J. Intell. Robot. Syst. 63, 75–99 (2011)

    Article  Google Scholar 

  21. Chen, C.T.: Introduction to linear system theory (1984)

  22. Lin, F.: Robust Control Design an Optimal Control Approach. Wayne State University, USA and Tongji University, China Copyright Research Studies Press Limited. Published by Wiley, England (2007)

    Google Scholar 

  23. Nikoobin, A.: Determining of Dynamic Load Carrying Capacity of Flexible Manipulators via Optimal Control, PhD Thesis, Iran University of Science and Technology (2008)

Download references

Author information

Authors and Affiliations

  1. Mechanical Engineering Department, Faculty of Engineering, Kharazmi University, Tehran, Iran

    H. Tourajizadeh, M. Rezaei & A. H. Sedigh

Authors
  1. H. Tourajizadeh
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. M. Rezaei
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. A. H. Sedigh
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to H. Tourajizadeh.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Tourajizadeh, H., Rezaei, M. & Sedigh, A.H. Optimal Control of Screw In-pipe Inspection Robot with Controllable Pitch Rate. J Intell Robot Syst 90, 269–286 (2018). https://doi.org/10.1007/s10846-017-0658-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10846-017-0658-7

Keywords

Search

Navigation