The article examines the velocity distribution in trays with different cross-sectional form and roughness. Analysis was conducted on the effect of various factors on the position of the maximum speed point. It is shown that at the position of the maximum speed point, the effect of the value of drag coefficient is manifest. It was found that with an increase in the roughness of the inner surface of the channel, the position of the maximum speed point shifts to the free surface of the flow.
Similar content being viewed by others
References
P. Debasish and K. Ghoshal. “Vertical distribution of fluid velocity and suspended sediment in open channel turbulent flow,” Fluid Dyn. Res., 48(3) (2016). DOI: https://doi.org/10.1088/0169-5983/48/3/035501.
O, Khintse, Turbulence, and its Mechanism and Theory [in Russian], Fizmatgiz, Moscow (1963).
Yu Han, Shu-Qing Yang, Muttucumaru Sivakumar, and Liu-Chao Qiu. “Investigation of velocity distribution in open channel flows based on conditional average of turbulent structures,” Math. Probl. Eng. (2017). DOI: https://doi.org/10.1155/2017/1458591.
P. S. Klebanoff and G. B. Shubauer, “Investigation of separation of the turbulent boundary layer,” in: NACA. Rep. 1030 (1951).
Yu. V. Bryanskaya, I. M. Markova, and A. V. Ostyakova, Hydraulics of Water and Suspended Flows in Rigid and Deformable Boundaries [in Russian], MGSU – ASV, Moscow (2009).
V. N. Goncharov, Basics of the Dynamics of Stream Flows [in Russian], Gidrometeoizdat, Leningrad (1954).
A. I. Mantis, V. S. Borovkov, and F. G. Mairanovskii, High Speed Flows with Free Surface [in Russian], Stroiizdat, (1979).
V. S. Borovkov, V. N. Baikov, M. F. Volynov, and D. V. Pisarev, “Local kinematic similarity of flow and velocity distribution in river flows,” Inzh.-Stroit. Zh., No. 6, 12 – 19 (2012).
A. A. Maastik, “Results of measuring velocities in triangular,
trapezoidal, and parabolic trays of various roughness,” in: Hydraulics and Heat Exchange in Uniform Motion of a Fluid in Channels [in Russian], Interuniversity compillation: Izd. Chuvash. Gos. Univ., (1980), pp. 43 – 58.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Gidrotekhnicheskoe Stroitel’stvo, No. 4, April 2023, pp. 50 – 53. DOI: https://doi.org/10.34831/EP.2023.35.10.009
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Ignatenko, E.V., Bryanskaya, Y.V. Velocity Distribution in Channels of Various Geometry and Roughness. Power Technol Eng 57, 412–414 (2023). https://doi.org/10.1007/s10749-023-01678-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10749-023-01678-7