Results are provided for comprehensive research conducted in PJSC VTI on large diameter pipe bends prepared by electroslag melting (ESM) of steel 15Kh1M1F-Sh intended for thermal power plant steam lines. Material from various bending zones is studied in order to evaluate the effect of bending on the quality of electroslag metal: a straight section, stretched, and compressed areas. Analysis of research results with the assessment of pipe bend operating life characteristics is conducted.
Similar content being viewed by others
References
U. V. Latosh and B. I. Medovar, Electroslag Melting [in Russian], Metallurgiya, Moscow (1970).
B. Paton, “Welding and special metallurgy,” Welding in the World, No. 4 (1976).
B. E. Hopkins, H. R. Topler, and G. R. Branch, “Improvement in The creep properties of Cr-Mo-V steels through enhanced purity,” J. Iron Steel Inst., No. 9, 745 – 747 (1971).
V. N. Skorobogatykh, L. Ya. Levkov, I. A. Schchenkova, K. N. Utkina, P. A. Kozlov, D. A. Prudnikov, A. M. Bazhenov, D. A. Shurygin, D. A. Terekhin, and T. V. Perevezentseva, “Technology and set of properties for electroslag melting workpieces for thermal ad atomic power station equipment,” Tyazh. Mashinostr., No. 11 – 12, 32 – 38 (2014).
L. B. Medovar, A. P. Stovpchenko, G. A. Dudka, A. N. Koz’-minskii, B. B. Fedorovskii, Ya., V. Gusev, and V. A. Lebed’, “State and prospects for using electroslag technology for producing long hollow ingots. Part. 1,” Élektrometallurgiya, No. 8, 11 – 19 (2014).
V. S. Dub, L. Ya. Levkov, D. A. Shurygin, Yu. N. Kriger, S. V. Orlov, S. I. Markov, and M. S. Nakhabina, “Experience of producing hollow pipe workpieces by electroslag melting,” Élektrometallurgiya, No. 1, 10 – 19 (2015).
V. N. Skorobogatykh, L. Ya. Levkov, Yu. N. Kriger, I. A. Shchenkova, A. M. Bazhenov, D. A. Prudnikov, D. A. Shurygin, N. A. Babanin, and A. A. Karev, “Production method ad set of properties for workpieces of a steam shut-off equipment Du 250 made of steel grade 10Kh9MFB,” Tyazh. Mashinostr., No. 6, 2 – 6 (2015).
V. N. Skorobogatykh, I. A. Shchenkova, I. A. Danyushevskii, E. A. Grin’, L. Ya. Levkov, D. A. Prudnikov, D. N. Zhuravlev, and A. M. Bazhenev, “Use of chromium steel grade 10Kh9MFB for steam shut-off and control valve equipment,” Teploénergetika, No. 4, 38 – 47 (2017).
T. I. Skul’skaya and M. S. Nakhabina, “Preparation of an electroslag melting method for high quality pipes for thermal power stations,” Élektr. Stantsii, No. 4, 14 – 17 (2017).
TU 1301-039-00212179-2010. Seamless Pipes Made of Carbon, Alloy, and Highly Alloyed Steels Prepared by the ESM Method for Thermal and Atomic Station Pipelines [in Russian].
RD 10-5773. Instructions for Monitoring Metal and Prolonging the Service Life of the Main Elements of Boilers, Turbines, and Thermal Power Station Pipelines [in Russian].
STO TsKTI 10-003-2007. Steam and Hot Water Pipelines for Thermal Power Stations. General Technical Specifications for Manufacture [in Russian].
TU 14-3P-55-2001. Steel Seamless Pipes for Steam Boilers and Pipelines. Technical Specifications [in Russian].
GOST 1497–84. Metals, Tensile Test Method [in Russian].
GOST 10006–80. Metal Pipes. Tensile Test Methods [in Russian].
GOST 19040–81. Metal Pipes. Tensile Test Method at Elevated Temperature [in Russian].
GOST 9454–78. Metals. Impact Bend Test Method at Reduced, Room, and Elevated Temperatures [in Russian].
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Élektricheskie Stantsii, No. 9, September 2020, pp. 30 – 37.
Rights and permissions
About this article
Cite this article
Kalugin, P.N., Anokhov, A.E., Fedina, I.V. et al. Study of Pipe Bend Metal Prepared by Electroslag Melting of Steel 15KH1M1F-SH and Intended for Thermal Power Plant Steam Lines. Power Technol Eng 54, 889–895 (2021). https://doi.org/10.1007/s10749-021-01303-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10749-021-01303-5