Abstract
This paper presents a novel method to establish a general solution for an isotropic homogeneous elastic plate of finite thickness. Under the assumption of vanishing out-of-plane shear stresses, a necessary condition of solvability of elastic problems is obtained. Moreover, a general solution dependent on the thickness-wise coordinate is derived, where the unknown function is still governed by a two-dimensional biharmonic equation. In terms of the two-dimensional Airy stress function or the classical solution in plane strain state, exact elastic stresses in an elastic plate of finite thickness are given. The solution for plane strain state can be a special case of the present, whereas that classic plane stress state is reduced by letting thickness approach zero. A comparison of the results between the present paper and plane stress state is made.
Similar content being viewed by others
References
Barber, J.R.: Elasticity. Springer, Dordrecht (2010)
Barlat, F., Brem, J.C., Yoon, J.W., Chung, K., Dick, R.E., Lege, D.J., Pourboghrat, F., Choi, S.H., Chu, E.: Plane stress yield function for aluminum alloy sheets—part 1: theory. Int. J. Plast. 19(9), 1297–1319 (2003)
Cotterell, B., Reddel, J.K.: The essential work of plane stress ductile fracture. Int. J. Fract. 27(11), 804–809 (2010)
England, A.H.: Complex variable solutions for an inhomogeneous thick plate containing a hole or a crack. Math. Mech. Solids 9(5), 445–471 (2004)
Gregory, R.D.: The general form of the three-dimensional elastic field inside an isotropic plate with free faces. J. Elast. 28(1), 1–28 (1992)
Hosokawa, H., Desai, A.V., Haque, M.A.: Plane stress fracture toughness of freestanding nanoscale thin films. Thin Solid Films 516(18), 6444–6447 (2008)
Hu, Z.-L., Lee, K.Y., Li, X.-F.: Crack in an elastic thin-film with surface effect. Int. J. Eng. Sci. 123, 158–173 (2018)
Hu, Z.-L., Li, X.-F.: A rigid line inclusion in an elastic film with surface elasticity. Z. Angew. Math. Phys. 69(4), 92 (2018)
Kaprielian, P.V., Rogers, T.G., Spencer, A.J.M.: Theory of laminated elastic plates I. Isotropic laminae. Philos. Trans. R. Soc. Lond. A 324, 565–594 (1988)
Love, A.E.H.: A Treatise on the Mathematical Theory of Elasticity. Cambridge University Press, Cambridge (1927)
Teodorescu, P.P.: Treatise on Classical Elasticity. Springer, Dordrecht (2013)
Timoshenko, S.P., Goodier, J.N.: Theory of Elasticity, 3rd edn. McGraw-Hill, New York (1970)
Unger, D.J.: Path independent integral for an elliptical hole in a plate under tension for plane stress deformation theory. J. Elast. 92(3), 217–226 (2008)
Wang, M.Z., Xu, B.X., Gao, Y.: On the assumptions of the generalized plane stress problem and the Filon average. Acta Mech. 225(4–5), 1419–1427 (2014)
Wang, M.Z., Xu, B.X., Zhao, B.S.: On the generalized plane stress problem, the Gregory decomposition and the Filon mean method. J. Elast. 108(1), 1–28 (2012)
Yi, D.K., Wang, T.C.: A new procedure for investigating three-dimensional stress fields in a thin plate with a through-the-thickness crack. Sci. China 61(6), 064611 (2018)
Acknowledgements
This work was supported by the National Natural Science Foundation of China (No. 11672336).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Declaration of Interest Statement
The authors declare that they have no conflict of interest.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Li, XF., Hu, ZL. Generalization of Plane Stress and Plane Strain States to Elastic Plates of Finite Thickness. J Elast 140, 243–256 (2020). https://doi.org/10.1007/s10659-020-09768-7
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10659-020-09768-7
Keywords
- Three-dimensional elastic problems
- Elasticity solution
- Elastic plate
- Plane stress state
- Plane strain state