Abstract
This research work demonstrated that the extraction components from natural fibers (NFs) during microwave-assisted hydrothermal treatment is a selective and controllable method, since the process and the extraction mechanism depend on the dielectric heating (DH) of the lignocellulosic components of NFs, mainly hemicellulose, and cellulose. DH causes hemicellulose degradation, which allows its extraction from the internal part of NFs to the reaction medium (water). Moreover, the cellulose fraction showed high thermal stability; in this regard, the treated fiber (MW-NF) increased its crystallinity percentage from 80.91 to 96.23%, and the thermal degradation temperature shifted from 182 to 240 °C, maintaining its fibrillar morphology even when the fibers present a hollow aspect. Furthermore, a direct relationship between time/energy and extraction percentage was established, which allowed controlling of the final properties of the treated NFs.
Graphical abstract
Similar content being viewed by others
Data availability
Not applicable.
References
Chandramohan D, Marimuthu K (2011) A review of natural fibers. Int J Res Rev Appl 8:194–206
De Melo EM, Clark JH, Matharu AS (2017) The Hy-MASS concept: hydrothermal microwave assisted selective scissoring of cellulose for insitu production of (meso)porous nanocellulose fibrils and crystals. Green Chem 19:3408–3417
Fang X, Simone CD, Vaccaro E, Huang SJ, Scola DA (2002) Ring-opening polymerization of ϵ-caprolactam and ϵ-caprolactone via microwave irradiation. J Polym Sci Part A Polym Chem 40:2264–2275. https://doi.org/10.1002/pola.10306
French AD (2014) Idealized powder diffraction patterns for cellulose polymorphs. Cellulose 21:885–896. https://doi.org/10.1007/s10570-013-0030-4
Gholampour A, Ozbakkaloglu T (2020) A review of natural fiber composites: properties, modification and processing techniques, characterization, applications. J Mater Sci 55:829–892. https://doi.org/10.1007/s10853-019-03990-y
González-Morones P, Hernández-Hernández E, Fernández-Tavizón S, Ledezma-Rodríguez R, Sáenz-Galindo A, Cadenas-Pliego G, Ziolo RF (2018) Exfoliation, reduction, hybridization and polymerization mechanisms in one-step microwave-assist synthesis of nanocomposite nylon-6/graphene. Polymer 146:73–81. https://doi.org/10.1016/j.polymer.2018.05.014
Hamad SF, Stehling N, Holland C, Foreman JP, Rodenburg C (2017) Low-voltage sem of natural plant fibers: microstructure properties (surface and cross-section) and their link to the tensile properties. Procedia Eng 200:295–302. https://doi.org/10.1016/j.proeng.2017.07.042
Iijima M, Nakamura K, Hatakeyama T, Hatakeyama H (2000) Phase transition of pectin with sorbed water. Carbohyd Polym 41:101–106. https://doi.org/10.1016/S0144-8617(99)00116-2
Kestur GS, Flores-Sahagun THS, Dos Santos LP, Dos Santos J, Mazzaro I, Mikowski A (2013) Characterization of blue agave bagasse fibers of Mexico. Compos A Appl Sci Manuf 45:153–161. https://doi.org/10.1016/j.compositesa.2012.09.001
Ledezma-Rodríguez R, Hernández EH, Yáñez-Macías R, Hernández ZG, Zúñiga GYR, Falcó MGG, Morones PG (2022) Study of the dielectric heating of graphite oxide and its effect on the microwave-assisted synthesis of Nylon-6/graphite oxide polymeric hybrid nanocomposites. J Appl Polym Sci 139:51567. https://doi.org/10.1002/app.51567
Mao Y, Robinson J, Binner E (2021) Understanding heat and mass transfer processes during microwave-assisted and conventional solvent extraction. Chem Eng Sci 233:116418. https://doi.org/10.1016/j.ces.2020.116418
Martins MA, Forato LA, Mattoso LHC, Colnago LA (2006) A solid state 13C high resolution NMR study of raw and chemically treated sisal fibers. Carbohydr Polym 64:127–133
Mello PA, Barin JS, Guarnieri RA (2014) Chapter 2 - Microwave heating. In: Flores ÉMM (ed) Microwave-assisted sample preparation for trace element analysis. Elsevier, pp 59–75. https://doi.org/10.1016/B978-0-444-59420-4.00002-7
Neto JSS, de Queiroz HFM, Aguiar RAA, Banea MD (2021) A review on the thermal characterisation of natural and hybrid fiber composites. Polymers 13:24. https://doi.org/10.3390/polym13244425
Nishiyama Y, Langan P, Chanzy H (2002) Crystal structure and hydrogen-bonding system in cellulose Iβ from synchrotron X-ray and neutron fiber diffraction. J Am Chem Soc 124:9074–9080. https://doi.org/10.1021/ja0257319
Obi KR, Uma MC, Shukla M (2013) Physico-chemical characterization of cellulose extracted from ficus leaves. J Biobased Mater Bioenergy 7:496–499. https://doi.org/10.1166/jbmb.2013.1342
Oudiani El, Msahli A, Sakli S (2017) In-depth study of agave fiber structure using Fourier transform infrared spectroscopy. Carbohydr Polym 164:242–248. https://doi.org/10.1016/j.carbpol.2017.01.091
Park S, Baker JO, Himmel M, Parrilla AP, Johnson KD (2010) Cellulose crystallinity index: measurement techniques and their impact on interpreting cellulase performance. Biotechnol Biofuels Bioprod 3:10
Paton RK, Windle HA (2008) Efficient microwave energy absorption by carbon nanotubes. Carbon 46:1935–1941. https://doi.org/10.1016/j.carbon.2008.08.001
Podgorbunskikh EM, Bychkov AL, Ryabchikova EI, Lomovsky OI (2020) The effect of thermomechanical pretreatment on the structure and properties of lignin-rich plant biomass. Molecules 25:995. https://doi.org/10.3390/molecules25040995
Romero-Zúñiga GY, González-Morones P, Sánchez-Valdés S, Yáñez-Macías R, Sifuentes-Nieves I, García-Hernández Z, Hernández-Hernández E (2021) Microwave radiation as alternative to modify natural fibers: recent trends and opportunities—a review. J Nat Fibers 19:7594–7610. https://doi.org/10.1080/15440478.2021.1952140
Sanjay MR, Arpitha GR, Naik L, Gopalakrishna K, Yogesha B (2016) Applications of natural fibers and its composites: an overview. Nat Resour 07:108–114. https://doi.org/10.4236/nr.2016.73011
Segal L, Creely JJ, Martin AE, Conrad CM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29:786–794. https://doi.org/10.1177/004051755902901003
Solís-Rosales SG, Naranjo-Naranjo L, Fonseca-Florido HA, González-Morones P, García-Hernández Z, Yañez RM, Romero GY, Gallardo-Vega C, Sifuentes-Nieves I, Hernández-Hernández E (2021) Alkali/ultrasound treatment as alternative to modify structural and thermal properties of Agave tequilana fibers. J Nat Fibers 19:9309–9322. https://doi.org/10.1080/15440478.2021.1982822
Speight JG (2015) Chapter 7—Wax deposition and fouling. In: Fouling in refineries, pp 155–173. https://doi.org/10.1016/B978-0-12-800777-8.00007-3
Syazwani NA, Yhaya MF, Azahari B, Ismail WR (2018) Utilisation of natural cellulose fibres in wastewater treatment. Cellulose 25:4887–4903. https://doi.org/10.1007/s10570-018-1935-8
Uma CM, Obi KR, Muzenda E, Guduri BR, Varada AR (2012) Extraction and characterization of cellulose microfibrils from agricultural residue—Cocos nucifera L. Biomass Bioenergy 46:555–563. https://doi.org/10.1016/j.biombioe.2012.06.039
Velu R, Calais T, Jayakumar A, Raspall F (2020) A Comprehensive review on bio-nanomaterials for medical implants and feasibility studies on fabrication of such implants by additive manufacturing technique. Materials 13:92. https://doi.org/10.3390/ma13010092
Viana MM, Lima MCFS, Forsythe JC, Gangoli VS, Cho M, Cheng Y, Caliman V (2015) Facile graphene oxide preparation by microwave-assisted acid method. J Braz Chem Soc 26:978–984. https://doi.org/10.5935/0103-5053.20150061
Yañez-Macias R, Hernandez-Hernandez E, Gallardo-Vega CA, Ledezma-Rodríguez R, Ziolo RF, Mendoza-Tolentino Y, Gonzalez-Morones P (2019) Covalent grafting of unfunctionalized pristine MWCNT with Nylon-6 by microwave assist in-situ polymerization. Polymer 185:121946. https://doi.org/10.1016/j.polymer.2019.121946
Yuan Y, Zou P, Zhou J, Geng Y, Fan J, Clark J, Zhang C (2019) Microwave-assisted hydrothermal extraction of non-structural carbohydrates and hemicelluloses from tobacco biomass. Carbohydr Polym 223:115043. https://doi.org/10.1016/j.carbpol.2019.115043
Zitzmann FL, Ward E, Meng X, Matharu AS (2021) Microwave-assisted defibrillation of microalgae. Molecules 26:4972. https://doi.org/10.3390/molecules26164972
Acknowledgments
The authors are grateful for the support of the Laboratorio Nacional en Innovación y Desarrollo de Materiales Ligeros para la Industria Automotriz (LANIAUTO) through the CONACYT project 321156. G.Y.R.Z. is acknowledged for the grant awarded by CONACYT under CVU No. 811629. We are grateful for the technical assistance of M.C. Myrna Salinas Hernández, L.C.Q. María Guadalupe Méndez Padilla, Lic. Julieta Sánchez Salazar, I.Q. Jesús Alfonso Mercado Silva, Dr. Uriel Alejandro Sierra Gómez. Special technical assistance is gratefully to Dr. Luis Ernesto Elizalde for the NMR measurement. We also thank the Laboratorio Nacional de Materiales Grafénicos (LNMG) for the facility in the use of characterization equipment through the CONACYT project 315799.
Funding
Not applicable.
Author information
Authors and Affiliations
Contributions
GYR: writing, investigation, methodology, editing, SS-V: review, supervision, IS-N: writing, editing, RY-M: editing, graphical material, PG-M: Writing, review, editing, EH-H: Supervision, review, validation, resources.
Corresponding authors
Ethics declarations
Conflict of interest
The authors have no relevant financial or non-financial interests to disclose.
Consent for publication
All authors consent to the publication of this manuscript.
Ethics approval and consent to participate
All authors declare informed consent.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Romero-Zúñiga, G.Y., Sánchez-Valdés, S., Sifuentes-Nieves, I. et al. Study of the microwave-assisted hydrothermal extraction of polysaccharides from agave fiber: production of hollow cellulose fibers. Cellulose 30, 5535–5547 (2023). https://doi.org/10.1007/s10570-023-05236-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-023-05236-2