Skip to main content
SpringerLink
Log in

Precipitation assay meets low wettability on paper: a simple approach for fabricating patterned paper sensors

  • Original Paper
  • Published:
Cellulose Aims and scope Submit manuscript

Abstract

The development of paper-based analytical platforms has brought a requirement on easily creating patterned paper sensors. This article describes a facile method of fabricating patterned paper sensors using a combination of wettability-controlled paper and the precipitation assays between analytes and sensing elements. Different from common fabrication processes in which patterned channels are defined by creating hydrophobic barriers, herein the direct deposition of the patterns of sensing elements onto paper is performed by simple writing and stamping. Without hydrophobic treatment, the patterned sensing components can remain in place on the paper substrate whose wettability is tuned via bovine serum albumin (BSA) modification. After exposure to the analytes, the precipitates of sensing reactions are not delocalized, giving a simple and successful patterned signal readout. The results of typical colorimetric assays show that slow capillary flow and insoluble products together on paper provide an extremely easy route for fabricating multifunctional patterned paper sensors.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  • Ahmed S, Bui MPN, Abbas A (2016) Paper-based chemical and biological sensors: engineering aspects. Biosens Bioelectron 77:249–263

    Article  CAS  Google Scholar 

  • Bănică FG (2012) Chemical sensors and biosensors: fundamentals and applications. Wiley, Hoboken

    Book  Google Scholar 

  • Carrasquilla C, Little JRL, Li Y, Brennan JD (2015) Patterned paper sensors printed with long-chain DNA aptamers. Chem Eur J 21:7369–7373

    Article  CAS  Google Scholar 

  • Cate DM, Dungchai W, Cunningham JC, Volckens J, Henry CS (2013) Simple, distance-based measurement for paper analytical devices. Lab Chip 13:2397–2404

    Article  CAS  Google Scholar 

  • Cate DM, Noblitt SD, Volckens J, Henry CS (2015) Multiplexed paper analytical device for quantification of metals using distance-based detection. Lab Chip 15:2808–2818

    Article  CAS  Google Scholar 

  • Cheng CM, Martinez AW, Gong J, Mace CR, Phillips ST, Carrilho E, Mirica KA, Whitesides GM (2010) Paper-based ELISA. Angew Chem Int Ed 49:4771–4774

    Article  CAS  Google Scholar 

  • Garcia PT, Cardoso TMG, Garcia CD, Carrilho E, Coltro WKT (2014) A handheld stamping process to fabricate microfluidic paper-based analytical devices with chemically modified surface for clinical assays. RSC Adv 4:37637–37644

    Article  Google Scholar 

  • Gehring A, He X, Fratamico P, Lee J, Bagi L, Brewster J, Paoli G, He Y, Xie Y, Skinner C, Barnett C, Harris D (2014) A high-throughput, precipitating colorimetric sandwich ELISA microarray for Shiga toxins. Toxins 6:1855

    Article  CAS  Google Scholar 

  • He Q, Ma C, Hu X, Chen H (2013) Method for fabrication of paper-based microfluidic devices by alkylsilane self-assembling and UV/O3-patterning. Anal Chem 85:1327–1331

    Article  CAS  Google Scholar 

  • Hubbe MA (2007) Paper’s resistance to wetting—a review of internal sizing chemicals and their effects. BioResources 2:106–145

    Google Scholar 

  • Jeong SG, Lee SH, Choi CH, Kim J, Lee CS (2015) Toward instrument-free digital measurements: a three-dimensional microfluidic device fabricated in a single sheet of paper by double-sided printing and lamination. Lab Chip 15:1188–1194

    Article  CAS  Google Scholar 

  • Li M, Tian J, Al-Tamimi M, Shen W (2012) Paper-based blood typing device that reports patient’s blood type “in writing”. Angew Chem Int Ed 51:5497–5501

    Article  CAS  Google Scholar 

  • Liana DD, Raguse B, Gooding JJ, Chow E (2012) Recent advances in paper-based sensors. Sensors 12:11505

    Article  CAS  Google Scholar 

  • Määttänen A, Fors D, Wang S, Valtakari D, Ihalainen P, Peltonen J (2011) Paper-based planar reaction arrays for printed diagnostics. Sens Actuators, B 160:1404–1412

    Article  Google Scholar 

  • Maejima K, Tomikawa S, Suzuki K, Citterio D (2013) Inkjet printing: an integrated and green chemical approach to microfluidic paper-based analytical devices. RSC Adv 3:9258–9263

    Article  CAS  Google Scholar 

  • Martinez AW, Phillips ST, Butte MJ, Whitesides GM (2007) Patterned paper as a platform for inexpensive, low-volume, portable bioassays. Angew Chem Int Ed 46:1318–1320

    Article  CAS  Google Scholar 

  • Meredith NA, Quinn C, Cate DM, Reilly TH, Volckens J, Henry CS (2016) Paper-based analytical devices for environmental analysis. Analyst 141:1874–1887

    Article  CAS  Google Scholar 

  • Murdock RC, Shen L, Griffin DK, Kelley-Loughnane N, Papautsky I, Hagen JA (2013) Optimization of a paper-based ELISA for a human performance biomarker. Anal Chem 85:11634–11642

    Article  CAS  Google Scholar 

  • Nurak T, Praphairaksit N, Chailapakul O (2013) Fabrication of paper-based devices by lacquer spraying method for the determination of nickel(II) ion in waste water. Talanta 114:291–296

    Article  CAS  Google Scholar 

  • OuYang L, Wang C, Du F, Zheng T, Liang H (2014) Electrochromatographic separations of multi-component metal complexes on a microfluidic paper-based device with a simplified photolithography. RSC Adv 4:1093–1101

    Article  CAS  Google Scholar 

  • Oyola-Reynoso S, Heim AP, Halbertsma-Black J, Zhao C, Tevis ID, Çınar S, Cademartiri R, Liu X, Bloch JF, Thuo MM (2015) Draw your assay: fabrication of low-cost paper-based diagnostic and multi-well test zones by drawing on a paper. Talanta 144:289–293

    Article  CAS  Google Scholar 

  • Pelton R (2009) Bioactive paper provides a low-cost platform for diagnostics. Trends Anal Chem 28:925–942

    Article  CAS  Google Scholar 

  • Sameenoi Y, Nongkai PN, Nouanthavong S, Henry CS, Nacapricha D (2014) One-step polymer screen-printing for microfluidic paper-based analytical device (µPAD) fabrication. Analyst 139:6580–6588

    Article  CAS  Google Scholar 

  • Samyn P (2013) Wetting and hydrophobic modification of cellulose surfaces for paper applications. J Mater Sci 48:6455–6498

    Article  CAS  Google Scholar 

  • Songjaroen T, Dungchai W, Chailapakul O, Laiwattanapaisal W (2011) Novel, simple and low-cost alternative method for fabrication of paper-based microfluidics by wax dipping. Talanta 85:2587–2593

    Article  CAS  Google Scholar 

  • Wang J, Monton MRN, Zhang X, Filipe CDM, Pelton R, Brennan JD (2014) Hydrophobic sol–gel channel patterning strategies for paper-based microfluidics. Lab Chip 14:691–695

    Article  CAS  Google Scholar 

  • Wu Y, Xue P, Kang Y, Hui KM (2013) Paper-based microfluidic electrochemical immunodevice integrated with nanobioprobes onto graphene film for ultrasensitive multiplexed detection of cancer biomarkers. Anal Chem 85:8661–8668

    Article  CAS  Google Scholar 

Download references

Acknowledgments

The authors thank John Zhu at the Melbourne Centre for Nanofabrication (MCN) in the Victorian Node of the Australian National Fabrication Facility (ANFF) for confocal imaging and technical help. Postgraduate research scholarships from Monash Graduate Education and Faculty of Engineering are gratefully acknowledged.

Author information

Authors and Affiliations

  1. Department of Chemical Engineering, Monash University, Wellington Rd., Clayton, VIC, 3800, Australia

    Rong Cao, Xue Zhang, Weirui Tan & Wei Shen

Authors
  1. Rong Cao
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Xue Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Weirui Tan
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Wei Shen
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Wei Shen.

Electronic supplementary material

Below is the link to the electronic supplementary material.

Supplementary material 1 (DOCX 426 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Cao, R., Zhang, X., Tan, W. et al. Precipitation assay meets low wettability on paper: a simple approach for fabricating patterned paper sensors. Cellulose 25, 583–592 (2018). https://doi.org/10.1007/s10570-017-1551-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10570-017-1551-z

Keywords

Search

Navigation