The possibility of applying a standard method for calculating the shear force for high-coercivity samarium-cobalt permanent magnets in a magnetic system in which the width of the magnet is more than two times smaller than its thickness is considered. Based on the results of the study, correction factors were introduced into the methodology for calculating the shear force in a magnetic system using such magnets depending on the air gap between them. Using the obtained mathematical expression, it is possible to calculate the shear force of permanent magnets in a magnetic system at the stage of design development of hermetic equipment when using magnets having dimensions of 2.57 (width) × 30 (length) × 8 (thickness) mm and an air gap between them from 1 to 4 mm.
Similar content being viewed by others
References
A. Ya. Krasil’nikov, A. A. Krasil’nikov, and D. V. Taranov, “Determination of shear force of high-coercivity permanent rare-earth magnets with a thickness of 5 mm,” Khimicheskoe i Neftegazovoe Mashinostroenie, 12, 36–39 (2019).
A. Ya. Krasil’nikov, Characteristic Use of a Magnetic Coupling in Sealed Machines [in Russian], AMB, Yekaterinburg (2017).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 57, No. 9, pp. 31–33, September, 2021.
Rights and permissions
About this article
Cite this article
Krasilnikov, A.Y., Krasilnikov, A.A. Determination of Shear Force of High-Coercivity Rare-Earth Permanent Magnets Having Smaller Width Than Thickness. Chem Petrol Eng 57, 770–776 (2022). https://doi.org/10.1007/s10556-022-01005-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-022-01005-3