Abstract
Tin oxide (SnO2) and aluminum-doped zinc oxide (AZO) have been recognized as promising materials for the electron transport layer (ETL) in perovskite solar cells (PSCs) due to their favorable optoelectronic properties and low-temperature deposition processes. However, high surface trap density at the ETL/perovskite interface limits the further improvement of the power conversion efficiency (PCE) of planar PSCs. Herein, we have demonstrated a simple surface treatment of low-temperature deposited SnO2/AZO–ETL through mono-ethanolamine (MEA) to passivate the defects at the AZO/perovskite interface and reduce carrier recombination. Meanwhile, after MEA modification, the defect states at the AZO/perovskite interface were reduced, and the carrier transport capability was improved. PSC based on MEA modification showed an enhanced PCE of 15.73%, compared to 12.66% without MEA treatment, and a fill factor (FF) of 68.30% on a 0.25 cm2 active area. Furthermore, the MEA-passivated device exhibits excellent stability and retains ~ 77% of its initial PCE after 1000 h under ambient storage without encapsulation. Thus, interface engineering based on the mono-ethanolamine passivation provides a feasible and novel strategy to improve the quality of ETL to fabricate high-efficiency planar PSCs.
Graphic abstract
Similar content being viewed by others
Data availability
The data that support the findings of the current research would be available on request from the corresponding author.
References
A.W. Faridi, M. Imran, G.H. Tariq, S. Ullah, S.F. Noor, S. Ansar, F. Sher, Synthesis and characterization of high-efficiency halide perovskite nanomaterials for light-absorbing applications. Ind. Eng. Chem. Res. (2022). https://doi.org/10.1021/acs.iecr.2c00416
Z. Yang, Z. Yu, H. Wei, X. Xiao, Z. Ni, B. Chen, Y. Deng, S.N. Habisreutinger, X. Chen, K. Wang, J. Zhao, P.N. Rudd, J.J. Berry, M.C. Beard, J. Huang, Enhancing electron diffusion length in narrow-bandgap perovskites for efficient monolithic perovskite tandem solar cells. Nat. Commun. 10, 4498 (2019). https://doi.org/10.1038/s41467-019-12513-x
T. Zhang, Y. Chen, Y. Chu, S.-J. Ding, W. Liu, X. Wu, Flexible perovskite and organic semiconductor heterojunction devices for tunable band-selective photodetection. ACS Appl. Electron. Mater. 4, 2805–2814 (2022). https://doi.org/10.1021/acsaelm.2c00322
J. Park, J. Kim, H.-S. Yun, M.J. Paik, E. Noh, H.J. Mun, M.G. Kim, T.J. Shin, S.I. Seok, Controlled growth of perovskite layers with volatile alkylammonium chlorides. Nature 616, 724–730 (2023). https://doi.org/10.1038/s41586-023-05825-y
S. Seo, S. Shin, E. Kim, S. Jeong, N.-G. Park, H. Shin, Amorphous TiO2 coatings stabilize perovskite solar cells. ACS Energy Lett. 6, 3332–3341 (2021). https://doi.org/10.1021/acsenergylett.1c01446
J.A. Smith, O.S. Game, J.E. Bishop, E.L.K. Spooner, R.C. Kilbride, C. Greenland, R. Jayaprakash, T.I. Alanazi, E.J. Cassella, A. Tejada, G. Chistiakova, M. Wong-Stringer, T.J. Routledge, A.J. Parnell, D.B. Hammond, D.G. Lidzey, Rapid scalable processing of tin oxide transport layers for perovskite solar cells. ACS Appl. Energy Mater. 3, 5552–5562 (2020). https://doi.org/10.1021/acsaem.0c00525
G. Liu, Y. Zhong, H. Mao, J. Yang, R. Dai, X. Hu, Z. Xing, W. Sheng, L. Tan, Y. Chen, Highly efficient and stable ZnO-based MA-free perovskite solar cells via overcoming interfacial mismatch and deprotonation reaction. Chem. Eng. J. 431, 134235 (2022). https://doi.org/10.1016/j.cej.2021.134235
S.Y. Park, K. Zhu, Advances in SnO2 for efficient and stable n–i–p perovskite solar cells. Adv. Mater. 34, 2110438 (2022). https://doi.org/10.1002/adma.202110438
P. Xu, H. He, J. Ding, P. Wang, H. Piao, J. Bao, W. Zhang, X. Wu, L. Xu, P. Lin, X. Yu, C. Cui, Simultaneous passivation of the SnO2/perovskite interface and perovskite absorber layer in perovskite solar cells using KF surface treatment. ACS Appl. Energy Mater. 4, 10921–10930 (2021). https://doi.org/10.1021/acsaem.1c01893
E. Jiang, Y. Ai, J. Yan, N. Li, L. Lin, Z. Wang, C. Shou, B. Yan, Y. Zeng, J. Sheng, J. Ye, Phosphate-passivated SnO2 electron transport layer for high-performance perovskite solar cells. ACS Appl. Mater. Interfaces 11, 36727–36734 (2019). https://doi.org/10.1021/acsami.9b11817
Q. Dong, C.H.Y. Ho, H. Yu, A. Salehi, F. So, Defect passivation by fullerene derivative in perovskite solar cells with aluminum-doped zinc oxide as electron transporting layer. Chem. Mater. 31, 6833–6840 (2019). https://doi.org/10.1021/acs.chemmater.9b01292
M. Venu Rajendran, S. Ganesan, V. Sudhakaran Menon, R.K. Raman, A. Alagumalai, A. Krishnamoorthy, Cesium iodide incorporation in tin oxide electron transport layer for defect passivation and efficiency enhancement in double cation absorber-based planar perovskite solar cells. Energy Technol. 9, 2100492 (2021). https://doi.org/10.1002/ente.202100492
S.-H. Wu, M.-Y. Lin, S.-H. Chang, W.-C. Tu, C.-W. Chu, Y.-C. Chang, Interfacial modification of sol-gel ZnO/AZO bilayer as highly efficient electron transport layer for perovskite solar cells. In: 2017 IEEE 44th Photovolt. Spec. Conf. PVSC, IEEE, Washington, DC, pp. 1051–1054 (2017). https://doi.org/10.1109/PVSC.2017.8366533
A.T. Gidey, E. Assayehegn, J.Y. Kim, Hydrophilic surface-driven crystalline grain growth of perovskites on metal oxides. ACS Appl. Energy Mater. 4, 6923–6932 (2021). https://doi.org/10.1021/acsaem.1c01020
S.K. Yadavalli, Z. Dai, M. Hu, Q. Dong, W. Li, Y. Zhou, R. Zia, N.P. Padture, Mechanisms of exceptional grain growth and stability in formamidinium lead triiodide thin films for perovskite solar cells. Acta Mater. 193, 10–18 (2020). https://doi.org/10.1016/j.actamat.2020.03.036
K. Mahmood, B.S. Swain, H.S. Jung, Controlling the surface nanostructure of ZnO and Al-doped ZnO thin films using electrostatic spraying for their application in 12% efficient perovskite solar cells. Nanoscale 6, 9127–9138 (2014). https://doi.org/10.1039/C4NR02065K
B. Gao, J. Meng, RbCs(MAFA)PbI3 perovskite solar cell with 22.81% efficiency using the precise ions cascade regulation. Appl. Surf. Sci. 530, 147240 (2020). https://doi.org/10.1016/j.apsusc.2020.147240
T. Das, N. Rana, P. Garg, A. Bera, A. Guchhait, Low-temperature and ambient processed all inorganic CsPbBr 3 perovskite solar cells: stability enhancement with AZO as an electron transport layer. J. Phys. Chem. C 127, 21504–21513 (2023). https://doi.org/10.1021/acs.jpcc.3c06560
J. Zhao, Y. Zhang, Q. Zhang, X. Zhao, B. Li, J. Zhang, Z. Zhu, J. Liu, Q. Liu, Efficient bifacial passivation enables printable mesoscopic perovskite solar cells with improved photovoltage and fill factor. Sol. RRL. 4, 2000288 (2020). https://doi.org/10.1002/solr.202000288
G. Yang, H. Lei, H. Tao, X. Zheng, J. Ma, Q. Liu, W. Ke, Z. Chen, L. Xiong, P. Qin, Z. Chen, M. Qin, X. Lu, Y. Yan, G. Fang, Reducing hysteresis and enhancing performance of perovskite solar cells using low-temperature processed Y-doped SnO2 nanosheets as electron selective layers. Small 13, 1601769 (2017). https://doi.org/10.1002/smll.201601769
Z. Yang, J. Dou, S. Kou, J. Dang, Y. Ji, G. Yang, W.-Q. Wu, D.-B. Kuang, M. Wang, Multifunctional phosphorus-containing Lewis acid and base passivation enabling efficient and moisture-stable perovskite solar cells. Adv. Funct. Mater. 30, 1910710 (2020). https://doi.org/10.1002/adfm.201910710
J. Liu, C. Gao, X. He, Q. Ye, L. Ouyang, D. Zhuang, C. Liao, J. Mei, W. Lau, Improved crystallization of perovskite films by optimized solvent annealing for high efficiency solar cell. ACS Appl. Mater. Interfaces 7, 24008–24015 (2015). https://doi.org/10.1021/acsami.5b06780
S. You, H. Wang, S. Bi, J. Zhou, L. Qin, X. Qiu, Z. Zhao, Y. Xu, Y. Zhang, X. Shi, H. Zhou, Z. Tang, A biopolymer heparin sodium interlayer anchoring TiO2 and MAPbI3 enhances trap passivation and device stability in perovskite solar cells. Adv. Mater. 30, 1706924 (2018). https://doi.org/10.1002/adma.201706924
H. Bi, B. Liu, D. He, L. Bai, W. Wang, Z. Zang, J. Chen, Interfacial defect passivation and stress release by multifunctional KPF6 modification for planar perovskite solar cells with enhanced efficiency and stability. Chem. Eng. J. 418, 129375 (2021). https://doi.org/10.1016/j.cej.2021.129375
E. Zimmermann, K.K. Wong, M. Müller, H. Hu, P. Ehrenreich, M. Kohlstädt, U. Würfel, S. Mastroianni, G. Mathiazhagan, A. Hinsch, T.P. Gujar, M. Thelakkat, T. Pfadler, L. Schmidt-Mende, Characterization of perovskite solar cells: towards a reliable measurement protocol. APL Mater. 4, 091901 (2016). https://doi.org/10.1063/1.4960759
V. Sarritzu, N. Sestu, D. Marongiu, X. Chang, S. Masi, A. Rizzo, S. Colella, F. Quochi, M. Saba, A. Mura, G. Bongiovanni, Optical determination of Shockley-Read-Hall and interface recombination currents in hybrid perovskites. Sci. Rep. 7, 44629 (2017). https://doi.org/10.1038/srep44629
N.K. Rana, T. Das, P. Garg, A. Bera, A. Guchhait, PTAA/Ag-based large area perovskite solar cells toward low-cost and ambient stability. J. Phys. Chem. C 127, 21954–21962 (2023). https://doi.org/10.1021/acs.jpcc.3c04037
M. Saliba, L. Etgar, Current density mismatch in perovskite solar cells. ACS Energy Lett. 5, 2886–2888 (2020). https://doi.org/10.1021/acsenergylett.0c01642
M. Saliba, T. Matsui, K. Domanski, J.-Y. Seo, A. Ummadisingu, S.M. Zakeeruddin, J.-P. Correa-Baena, W.R. Tress, A. Abate, A. Hagfeldt, M. Grätzel, Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance. Science 354, 206–209 (2016). https://doi.org/10.1126/science.aah5557
J. Chantana, Y. Kawano, T. Nishimura, A. Mavlonov, T. Minemoto, Impact of Urbach energy on open-circuit voltage deficit of thin-film solar cells. Sol. Energy Mater. Sol. Cells 210, 110502 (2020). https://doi.org/10.1016/j.solmat.2020.110502
S. Zeiske, C. Kaiser, P. Meredith, A. Armin, Sensitivity of sub-bandgap external quantum efficiency measurements of solar cells under electrical and light bias. ACS Photonics 7, 256–264 (2020). https://doi.org/10.1021/acsphotonics.9b01531
Y. Gong, R. Qiu, C. Niu, J. Fu, E. Jedlicka, R. Giridharagopal, Q. Zhu, Y. Zhou, W. Yan, S. Yu, J. Jiang, S. Wu, D.S. Ginger, W. Huang, H. Xin, Ag incorporation with controlled grain growth enables 12.5% efficient kesterite solar cell with open circuit voltage reached 64.2% Shockley-Queisser LIMIT. Adv. Funct. Mater. 31, 2101927 (2021). https://doi.org/10.1002/adfm.202101927
B. Subedi, C. Li, C. Chen, D. Liu, M.M. Junda, Z. Song, Y. Yan, N.J. Podraza, Urbach energy and open-circuit voltage deficit for mixed anion-cation perovskite solar cells. ACS Appl. Mater. Interfaces 14, 7796–7804 (2022). https://doi.org/10.1021/acsami.1c19122
J. Wang, J. Zhang, Y. Zhou, H. Liu, Q. Xue, X. Li, C.-C. Chueh, H.-L. Yip, Z. Zhu, A.K.Y. Jen, Highly efficient all-inorganic perovskite solar cells with suppressed non-radiative recombination by a Lewis base. Nat. Commun. 11, 177 (2020). https://doi.org/10.1038/s41467-019-13909-5
J. Shi, Y. Li, Y. Li, D. Li, Y. Luo, H. Wu, Q. Meng, From ultrafast to ultraslow: charge-carrier dynamics of perovskite solar cells. Joule. 2, 879–901 (2018). https://doi.org/10.1016/j.joule.2018.04.010
Q. Hu, W. Chen, W. Yang, Y. Li, Y. Zhou, B.W. Larson, J.C. Johnson, Y.-H. Lu, W. Zhong, J. Xu, L. Klivansky, C. Wang, M. Salmeron, A.B. Djurišić, F. Liu, Z. He, R. Zhu, T.P. Russell, Improving efficiency and stability of perovskite solar cells enabled by a near-infrared-absorbing moisture barrier. Joule. 4, 1575–1593 (2020). https://doi.org/10.1016/j.joule.2020.06.007
C. Zhu, X. Niu, Y. Fu, N. Li, C. Hu, Y. Chen, X. He, G. Na, P. Liu, H. Zai, Y. Ge, Y. Lu, X. Ke, Y. Bai, S. Yang, P. Chen, Y. Li, M. Sui, L. Zhang, H. Zhou, Q. Chen, Strain engineering in perovskite solar cells and its impacts on carrier dynamics. Nat. Commun. 10, 815 (2019). https://doi.org/10.1038/s41467-019-08507-4
H. Tan, F. Che, M. Wei, Y. Zhao, M.I. Saidaminov, P. Todorović, D. Broberg, G. Walters, F. Tan, T. Zhuang, B. Sun, Z. Liang, H. Yuan, E. Fron, J. Kim, Z. Yang, O. Voznyy, M. Asta, E.H. Sargent, Dipolar cations confer defect tolerance in wide-bandgap metal halide perovskites. Nat. Commun. 9, 3100 (2018). https://doi.org/10.1038/s41467-018-05531-8
K. Poorkazem, T.L. Kelly, Improving the stability and decreasing the trap state density of mixed-cation perovskite solar cells through compositional engineering. Sustain. Energy Fuels 2, 1332–1341 (2018). https://doi.org/10.1039/C8SE00127H
M.O. Reese, S.A. Gevorgyan, M. Jørgensen, E. Bundgaard, S.R. Kurtz, D.S. Ginley, D.C. Olson, M.T. Lloyd, P. Morvillo, E.A. Katz, A. Elschner, O. Haillant, T.R. Currier, V. Shrotriya, M. Hermenau, M. Riede, K. R. Kirov, G. Trimmel, T. Rath, O. Inganäs, F. Zhang, M. Andersson, K. Tvingstedt, M. Lira-Cantu, D. Laird, C. McGuiness, S. (Jimmy) Gowrisanker, M. Pannone, M. Xiao, J. Hauch, R. Steim, D.M. DeLongchamp, R. Rösch, H. Hoppe, N. Espinosa, A. Urbina, G. Yaman-Uzunoglu, J.-B. Bonekamp, A.J.J.M. van Breemen, C. Girotto, E. Voroshazi, F.C. Krebs, Consensus stability testing protocols for organic photovoltaic materials and devices. In: Spec. Issue 3rd Int. Summit OPV Stab. 95, 1253–1267 (2011). https://doi.org/10.1016/j.solmat.2011.01.036.
Acknowledgements
Naba K. Rana and Nikhil Chander would like to acknowledge financial support through the project DST/ETC/CASE/RES/2023/04 (C) awarded by the Department of Science and Technology (Technology Mission Division), Government of India under the Solar Challenge Award Scheme in collaboration with Prof. Vamsi K. Komarala (Department of Energy Science and Engineering, IIT Delhi). The authors would like to thank Dr. Sanjib Banerjee, Mr. Bhanendra Sahu, Dr. Satyajit Gupta, and Mr. Deepak Aloysius of the Department of Chemistry, IIT Bhilai, for providing access to FTIR, PL, and TRPL instruments facilities.
Author information
Authors and Affiliations
Contributions
NKR: writing—original draft, visualization, experimentation, validation, resources, investigation, formal analysis, and data curation. MRS: review and editing. DPS: review, editing, supervision, investigation. NC: review, editing, supervision, project administration, methodology, funding acquisition, conceptualization, formal analysis, and investigation.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that no competing financial interests or personal relationships could have appeared to influence the work reported in this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Rana, N.K., Samantaray, M.R., Singh, D.P. et al. Low-temperature processed planar perovskite solar cells based on bilayer electron transport layer stabilized using a surface defect passivation strategy. Appl. Phys. A 130, 82 (2024). https://doi.org/10.1007/s00339-023-07243-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s00339-023-07243-3