Skip to main content

Advertisement

Log in

Investigation on behavior of diesel engine performance, emission, and combustion characteristics using nano-additive in neat biodiesel

  • Original
  • Published:
Heat and Mass Transfer Aims and scope Submit manuscript

Abstract

This work investigates the combustion, performance and emission characteristics of neat palm stearin biodiesel (PSBD) fuelled diesel engine with silver oxide as a additive in various mass fractions (5 and 10 ppm) and various particle size (10 and 20 nm) particles and the results compared with conventional diesel. Experiments were conducted in a natural aspirated, single-cylinder diesel engine at a constant speed and compression ratio of 1500 rpm and 18:1 respectively. Silver oxide (AgO) nano particles were added with neat biodiesel using ultrasonicator. The experimental investigation on diesel engine reveals that the addition of silver oxide nano-additives to PSBD resulted in enhancement in ignition characteristics because of enhanced surface area to volume ratio. Further, the addition of AgO nano-additive to PSBD resulted in enhancement in brake thermal efficiency (BTE) with a reduction in brake specific fuel consumption (BSFC). The experimental results also show that the AgO nanoparticles at 20 nm particle size and 10 ppm concentartion promote an improved level of hydrocarbon (HC), carbon monoxide (CO), smoke emissions and nitrogen (NOx) emission than neat biodiesel. Further, The AgO nano-additive inclusion at different 10 ppm significantly reduces the peak pressure and increases the net Heat Release rate values and its corresponding CA. An inclusion of 20 nm nano-additive at 10 ppm concentartion in PSBD reduces the In Cylinder Pressure and increases the Net Heat Release Rate values by 2.2 and 4.7% respectively than PSBD.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others

References

  1. Yogish H, Chandrashekara K, Pramod Kumar MR (2012) Optimization of experimental conditions for composite biodiesel production from transesterification of mixed oils of Jatropha and Pongamia. Heat Mass Transf 48(11):1955–1960. https://doi.org/10.1007/s00231-012-1034-6

    Article  Google Scholar 

  2. Devarajan Y, Munuswamy DB, Nagappan B, Pandian AK (2018) Performance, combustion and emission analysis of mustard oil biodiesel and octanol blends in diesel engine. Heat Mass Transf 54(6):1803–1811. https://doi.org/10.1007/s00231-018-2274-x

    Article  Google Scholar 

  3. Radhakrishnan S, Munuswamy DB, Devarajan Y, Mahalingam A (2018) Performance, emission and combustion study on neat biodiesel and water blends fuelled research diesel engine. Heat Mass Transf. https://doi.org/10.1007/s00231-018-2509-x

  4. Karthickeyan V (2018) Experimental analysis on thermally coated diesel engine with neem oil methyl ester and its blends. Heat Mass Transf 54(7):1961–1974. https://doi.org/10.1007/s00231-018-2286-6

    Article  Google Scholar 

  5. Vairamuthu G, Sundarapandian S, Thangagiri B (2015) Use of calophyllum inophyllum biofuel blended with diesel in DI diesel engine modified with nozzle holes and its size. Heat Mass Transf 52(5):1005–1013. https://doi.org/10.1007/s00231-015-1623-2

    Article  Google Scholar 

  6. Senthil R, Silambarasan R, Pranesh G (2016) Antioxidant (A-tocopherol acetate) effect on oxidation stability and NOx emission reduction in methyl ester of Annona oil operated diesel engine. Heat Mass Transf 53(5):1797–1804. https://doi.org/10.1007/s00231-016-1939-6

    Article  Google Scholar 

  7. Senthil R, Silambarasan R, Pranesh G (2016) Exhaust emissions reduction from diesel engine using combined Annona–Eucalyptus oil blends and antioxidant additive. Heat Mass Transf 53(3):1105–1112. https://doi.org/10.1007/s00231-016-1882-6

    Article  Google Scholar 

  8. Chakraborty A, Roy S, Banerjee R (2018) Characterization of performance-emission indices of a diesel engine using ANFIS operating in dual-fuel mode with LPG. Heat Mass Transf 54(9):2725–2742. https://doi.org/10.1007/s00231-018-2312-8

    Article  Google Scholar 

  9. Srinivasa Rao M, Anand RB (2016) Performance and emission characteristics improvement studies on a biodiesel fuelled DICI engine using water and AlO(OH) nano-additives. Appl Therm Eng [Internet] Elsevier BV 98:636–645. Available from: https://doi.org/10.1016/j.applthermaleng.2015.12.09

  10. Keskin A, Guru M, Altıparmak D (2007) Biodiesel production from tall oil with synthesized Mn and Ni based additives: effects of the additives on fuel consumption and emissions. Fuel 86(7–8):1139–1143. Available from: https://doi.org/10.1016/j.fuel.2006.10.021

  11. Shaafi T, Velraj R (2015) Influence of alumina nano-additives, ethanol and isopropanol blend as additive with diesel–soybean biodiesel blend fuel: combustion, engine performance and emissions. Renew Energy 80:655–663. Available from: https://doi.org/10.1016/j.renene.2015.02.042

  12. Seela CR, Ravisankar B, Raju BMVA (2017) A GRNN based frame work to test the influence of nano zinc additive biodiesel blends on CI engine performance and emissions. Egypt J Pet. Available from: https://doi.org/10.1016/j.ejpe.2017.09.006

  13. Devarajan Y, Munuswamy DB, Mahalingam A (2018) Influence of nano-additive on performance and emission characteristics of a diesel engine running on neat neem oil biodiesel. Environ Sci Pollut Res. https://doi.org/10.1007/s11356-018-2618-6

  14. Devarajan Y, Mahalingam A, Munuswamy DB, Arunkumar T (2018) Combustion, performance, and emission study of a research diesel engine fueled with palm oil biodiesel and its additive. Energy Fuel. https://doi.org/10.1021/acs.energyfuels.8b01125

  15. Yuvarajan D, Ramanan MV (2016) Effect of magnetite ferrofluid on the performance and emissions characteristics of diesel engine using methyl esters of mustard oil. Arab J Sci Eng 41(5):2023–2030. Available from: https://doi.org/10.1007/s13369-016-2060-3

  16. Shukla PC, Gupta T, Labhasetwar NK, Khobaragade R, Gupta NK, Agarwal AK (2017) Effectiveness of non-noble metal based diesel oxidation catalysts on particle number emissions from diesel and biodiesel exhaust. Sci Total Environ [Internet] Elsevier BV 574:1512–1520. Available from: https://doi.org/10.1016/j.scitotenv.2016.08.155

  17. Dhinesh B, Niruban Bharathi R, Isaac JoshuaRamesh Lalvani J, Parthasarathy M, Annamalai K (2017) An experimental analysis on the influence of fuel borne additives on the single cylinder diesel engine powered by Cymbopogon flexuosus biofuel. J Energy Inst 90(4):634–645. https://doi.org/10.1016/j.joei.2016.04.010

    Article  Google Scholar 

  18. Pandian AK, Ramakrishnan RBB, Devarajan Y (2017) Emission analysis on the effect of nano-additives on neat biodiesel in unmodified diesel engine. Environ Sci Pollut Res [Internet] Springer Nature 24(29):23273–23278. Available from: https://doi.org/10.1007/s11356-017-9973-6

  19. Yuvarajan D, Ravikumar J, Babu MD (2016) Simultaneous optimization of smoke and NOx emissions in a stationary diesel engine fuelled with diesel–oxygenate blends using the grey relational analysis in the Taguchi method. Anal Methods 8(32):6222–6230. Available from: https://doi.org/10.1039/c6ay01696k

  20. Venkata Ramanan M, Yuvarajan D (2016) Emission analysis on the influence of magnetite nanofluid on methyl ester in diesel engine. Atmospheric Pollution Research [Internet] Elsevier BV 7(3):477–481. Available from: https://doi.org/10.1016/j.apr.2015.12.001

  21. Wu Q, Xie X, Wang Y, Roskilly T (2017) Experimental investigations on diesel engine performance and emissions using biodiesel adding with carbon coated aluminum nano-additives. Energy Procedia 142:3603–3608. Available from: https://doi.org/10.1016/j.egypro.2017.12.251

  22. Debbarma S, Misra RD (2017) Effects of iron nano-additive fuel additive on the performance and exhaust emissions of a CI engine fuelled with diesel and biodiesel. Journal of Thermal Science and Engineering Applications. Available from: https://doi.org/10.1115/1.4038708

  23. Pourfallah M, Armin M (2018) An experimental and numerical study of the effects of reformer gas (H2 and CO) enrichment on the natural gas homogeneous charge compression ignition (HCCI) engine. Heat Mass Transf. https://doi.org/10.1007/s00231-018-2479-z

  24. Yogish H, Chandarshekara K, Pramod Kumar MR (2013) A study of performance and emission characteristics of computerized CI engine with composite biodiesel blends as fuel at various injection pressures. Heat Mass Transf 49(9):1345–1355. https://doi.org/10.1007/s00231-013-1181-4

    Article  Google Scholar 

  25. Vairamuthu G, Thangagiri B, Sundarapandian S (2017) Experimental and artificial neural network based prediction of performance and emission characteristics of DI diesel engine using Calophyllum inophyllum methyl ester at different nozzle opening pressure. Heat Mass Transf 54(1):99–113. https://doi.org/10.1007/s00231-017-2109-1

    Article  Google Scholar 

  26. Rathinam S, Justin Abraham Baby S (2018) Influence of water on exhaust emissions on unmodified diesel engine propelled with biodiesel. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects:1–7. https://doi.org/10.1080/15567036.2018.1503756

  27. Radhakrishnan S, Munuswamy DB, Mahalingam A (2018) Effect of nanoparticle on emission and performance characteristics of a diesel engine fueled with cashew nut shell biodiesel. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects:1–9. https://doi.org/10.1080/15567036.2018.1502848

  28. Senthilkumar G, Sajin JB, Arunkumar T (2018) Evaluation of emission, performance and combustion characteristics of dual fuelled research diesel engine. Environ Technol:1–8. https://doi.org/10.1080/09593330.2018.1509888

  29. Arul Gnana Dhas A, Nagappan B (2018) Analysis of emission reduction in ethyne–biodiesel-aspirated diesel engine. International Journal of Green Energy 15(7):436–440. https://doi.org/10.1080/15435075.2018.1473774

    Article  Google Scholar 

  30. Venkata Ramanan, M, Yuvarajan, D (2015) Emissions analysis of preheated methyl ester on CI engine. Appl Mech Mater 812:21–25. https://doi.org/10.4028/www.scientific.net/amm.812.21

  31. Yuvarajan D, Ramanan MV (2016) Investigation on effect of magnetite nanofluid on performance and emission patterns of methyl esters of bio diesel. J Environ Eng Landsc Manag 24(2):90–96. https://doi.org/10.3846/16486897.2016.1142447

  32. Yuvarajan D, Venkata Ramanan M (2016) Experimental analysis on neat mustard oil methyl ester subjected to ultrasonication and microwave irradiation in four stroke single cylinder diesel engine. J Mech Sci Technol 30(1):437–446. https://doi.org/10.1007/s12206-015-1248-x

  33. Venkata Ramanan M, Yuvarajan D (2015) Performance study of preheated mustard oil methyl ester on naturally aspirated CI engine. Appl Mech Mater 787:761–765. https://doi.org/10.4028/www.scientific.net/amm.787.761

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Yuvarajan Devarajan.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Devarajan, Y., Munuswamy, D.B. & Mahalingam, A. Investigation on behavior of diesel engine performance, emission, and combustion characteristics using nano-additive in neat biodiesel. Heat Mass Transfer 55, 1641–1650 (2019). https://doi.org/10.1007/s00231-018-02537-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00231-018-02537-2

Navigation