Abstract
Coffee is one of the mostly consumed beverages worldwide. Roasting of coffee is an important process causing many changes in the quality and sensory characteristics of coffee beans. The objective of this study was the determination of the effect of roasting on the physicochemical and sensory properties and comparison of six coffee varieties, namely Brazil Santos, Brazil Rio Minas, Mexico Finca Muxbal, Guatemala Shb Ep, Ethiopia Djimmah, and India Robusta. Coffee beans were subjected to heat treatment at air temperatures up to 270 °C for up to 20–27 min, depending on the coffee variety and the desirable roasting degree. During the whole process, various physicochemical properties (mass, volume, density, color) and sorption isotherms of coffee beans were measured. For sensory evaluation, arabian and espresso beverages were prepared. Color of coffee beans darkened with increasing time and temperature during roasting, while volume increased. Total mass loss was also observed. Sorption isotherms followed type III, except for the variety India Robusta and the raw samples that followed type II. Sensory characteristics were distinctly different for each of the studied varieties. In arabian coffee drinks the color of cream was darker compared to espresso drinks and presented less acid and sour taste. Concerning texture, the body was positively evaluated both in arabian and espresso drinks.
Graphical abstract
Similar content being viewed by others
References
Abalo R (2020) Coffee and caffeine consumption for human health. Coffee Caffeine Consum Hum Heal. https://doi.org/10.3390/books978-3-03928-629-4
Melese YY, Kolech SA (2021) Coffee (Coffea arabica L.): methods, objectives, and future strategies of breeding in Ethiopia—Review. Sustain. https://doi.org/10.3390/su131910814
Garcia-Freites S, Welfle A, Lea-Langton A, Gilbert P, Thornley P (2020) The potential of coffee stems gasification to provide bioenergy for coffee farms: a case study in the Colombian coffee sector. Biomass Conversion Biorefinery 10:1137–1152
ICO, I. C. O. (2021) Coffee year production by country. Data, May 2021:7–9
Caprioli G, Cortese M, Cristalli G, Maggi F, Odello L, Ricciutelli M, Sagratini G, Sirocchi V, Tomassoni G, Vittori S (2012) Optimization of espresso machine parameters through the analysis of coffee odorants by HS-SPME-GC/MS. Food Chem 135:1127–1133
Treto CP, Corrêa PC, Solís K (2014) Volumetric shrinkage and shape of Conilon coffee fruit (Coffea Canephora). J Agric Stud 2(1):73
Franca AS, Mendonça JCF, Oliveira SD (2005) Composition of green and roasted coffees of different cup qualities. LWT Food Sci Technol 38:709–715
Jokanović MR, Džinić NR, Cvetković BR, Grujić S, Odžaković B (2012) Changes of physical properties of coffee beans during roasting. Acta Periodica Technologica 43:21–31
Gloess AN, Vietri A, Wieland F, Smrke S, Schönbächler B, López JAS, Petrozzi S, Bongers S, Koziorowski T, Yeretzian C (2014) Evidence of different flavour formation dynamics by roasting coffee from different origins: on-line analysis with PTR-ToF-MS. Int J Mass Spectrom 365–366:324–337
Mussatto SI, Machado EMS, Martins S, Teixeira JA (2011) Production, composition, and application of coffee and its industrial residues. Food Bioprocess Technol 4:661–672
Fadai NT, Please CP, Van Gorder RA (2019) Modelling structural deformations in a roasting coffee bean. Int J Non Linear Mech 110:123–130
Münchow M, Alstrup J, Steen I, Giacalone D (2020) Roasting conditions and coffee flavor: a multi-study empirical investigation. Beverages 6:1–14
Chandrasekar V, Viswanathan R (1999) Physical and thermal properties of coffee. J Agric Eng Res 73:227–234
Nakilcioğlu-Taş E, Ötleş S (2019) Physical characterization of arabica ground coffee with different roasting degrees. An Acad Bras Cienc 91:1–15
Masi C, Dinnella C, Barnabà M, Navarini L, Monteleone E (2013) Sensory properties of under-roasted coffee beverages. J Food Sci. https://doi.org/10.1111/1750-3841.12211
Illy A, Viani R (2005) Espresso coffee: the science of quality. Elsevier Academic Press
ICO (1991) Sensory evaluation of coffee
Fabbri A, Cevoli C, Alessandrini L, Romani S (2011) Numerical modeling of heat and mass transfer during coffee roasting process. J Food Eng 105:264–269
Bustos-Vanegas JD, Corrêa PC, Martins MA, Baptestini FM, Campos RC, de Oliveira GHH, Nunes EHM (2018) Developing predictive models for determining physical properties of coffee beans during the roasting process. Ind Crops Prod 112:839–845
Bicas J, Rodriguez-Amaya D (2021) Generation of process-derived flavors and off-flavors. In: Chemical changes during processing and storage of foods, pp 385–451. https://doi.org/10.1016/B978-0-12-817380-0.00009-9
Sualeh A, Endris S, Mohammed A (2014) Processing method, variety and roasting effect on cup quality of Arabica coffee (Coffea arabica L.). J Agric Food Sci 2:70–75
Bicho NC, Lidon FC, Ramalho JC, Leitão AE (2013) Quality assessment of Arabica and Robusta green and roasted coffees - a review. Emirates J Food Agric 25:945–950
Perren R, Geiger R, Escher F (2001) Mechanism of volume expansion in coffee beans during roasting. In: 19th international colloquium on the chemistry of coffee
Yeretzian C, Jordan A, Badoud R, Lindinger W (2002) From the green bean to the cup of coffee: investigating coffee roasting by on-line monitoring of volatiles. Eur Food Res Technol 214:92–104
Getaneh E, Fanta SW, Satheesh N (2020) Effect of broken coffee beans particle size, roasting temperature, and roasting time on quality of coffee beverage. J Food Qual. https://doi.org/10.1155/2020/8871577
Pittia P, Nicoli MC, Sacchetti G (2006) J.1745–4603.2007.00089.X.Pdf. 38:116–134
Wang N (2012) Physicochemical changes of coffee beans during roasting. University of Guelph
Iaccheri E, Laghi L, Cevoli C, Berardinelli A, Ragni L, Romani S, Rocculi P (2015) Different analytical approaches for the study of water features in green and roasted coffee beans. J Food Eng 146:28–35
Collazos-Escobar GA, Gutiérrez-Guzmán N, Váquiro-Herrera HA (2019) Modeling dynamic adsorption isotherms and thermodynamic properties of specialty ground roasted-coffee (Coffea arabica L.). Coffee Sci 14:93–103
Nilnont W, Thepa S, Janjai S, Kasayapanand N, Thamrongmas C, Bala BK (2012) Finite element simulation for coffee (Coffea arabica) drying. Food Bioprod Process 90:341–350
Ramesh MN (2003) Moisture transfer properties of cooked rice during drying. LWT Food Sci Technol 36:245–255
Manousidis C (2009) The manual of coffee. Psychalou
Perrier-Robert A (2002) Le café. Solar
Ohiokpehai O, Brumen G, Clifford M (1982) The chlorogenic acids content of some peculiar green coffee beans and the implications for beverage quality. In: 10th international colloquium on the chemistry of coffee, ASIC
Buffo RA, Cardelli-Freire C (2004) Coffee flavour: an overview. Flavour Fragr J 19:99–104
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors have no relevant financial or non-financial interests to disclose. The authors have no competing interests to declare that are relevant to the content of this article. All authors certify that they have no affiliations with or involvement in any organization or entity with any financial interest or non-financial interest in the subject matter or materials discussed in this manuscript. The authors have no financial or proprietary interests in any material discussed in this article.
Compliance with Ethics requirements
The research does not involve human participants and/or animals.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Tsiafitsa, A., Oikonomopoulou, V., Stramarkou, M. et al. Effect of heat treatment on physicochemical and sensory properties of selected coffee varieties. Eur Food Res Technol 248, 2009–2020 (2022). https://doi.org/10.1007/s00217-022-04025-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00217-022-04025-8