Skip to main content
SpringerLink
Log in

Analytical evaluation of defect generation for selective laser melting of metals

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Defects in selective laser melting parts are among major reasons that hinder the wider adoption of a laser powder bed–based manufacturing. Experiments and numerical modeling are often proceeded to gain a better understanding of defect generation. However, these approaches demand extensive computational and experimental resources until comprehensive understanding of a process-defect relationship can be developed. To address this challenge, the present study utilized an analytical approach to illustrate the relationship between processing parameters and common defects such as lack of fusion, keyholing, and balling effects. The primary aim was to serve as a quick and efficient tool to identify processing conditions leading to undesirable outcome. The analysis began by predicting melt pool dimensions, in which these dimensions were successively used for the defect determination. Ultimately, criteria for defect initiation were combined and presented in a single processing window, where available experimental data from various materials and processes were compared throughout the study to ensure the validity of the proposed approach.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Frazier WE (2014) Metal additive manufacturing: a review. J Mater Eng Perform 23:1917–1928

    Article  Google Scholar 

  2. Kundakcıoğlu E, Lazoglu I, Poyraz Ö, Yasa E, Cizicioğlu N (2018) Thermal and molten pool model in selective laser melting process of Inconel 625. Int J Adv Manuf Technol 95:3977–3984

    Article  Google Scholar 

  3. Song B, Dong S, Liao H, Coddet C (2012) Process parameter selection for selective laser melting of Ti6Al4V based on temperature distribution simulation and experimental sintering. Int J Adv Manuf Technol 61:967–974

    Article  Google Scholar 

  4. Bauereiß A, Scharowsky T, Körner C (2014) Defect generation and propagation mechanism during additive manufacturing by selective beam melting. J Mater Process Technol 214:2522–2528

    Article  Google Scholar 

  5. Rausch AM, Markl M, Körner C (2018) Predictive simulation of process windows for powder bed fusion additive manufacturing: influence of the powder size distribution. Comput Math Appl

  6. Panwisawas C, Perumal B, Ward RM, Turner N, Turner RP, Brooks JW, Basoalto HC (2017) Keyhole formation and thermal fluid flow-induced porosity during laser fusion welding in titanium alloys: experimental and modelling. Acta Mater 126:251–263

    Article  Google Scholar 

  7. Wu Y-C, San C-H, Chang C-H, Lin H-J, Marwan R, Baba S, Hwang W-S (2018) Numerical modeling of melt-pool behavior in selective laser melting with random powder distribution and experimental validation. J Mater Process Technol 254:72–78

    Article  Google Scholar 

  8. Cunningham R, Narra SP, Montgomery C, Beuth J, Rollett AD (2017) Synchrotron-based X-ray microtomography characterization of the effect of processing variables on porosity formation in laser power-bed additive manufacturing of Ti-6Al-4V. Jom 69:479–484

    Article  Google Scholar 

  9. Tabernero I, Lamikiz A, Martínez S, Ukar E, Figueras J (2011) Evaluation of the mechanical properties of Inconel 718 components built by laser cladding. Int J Mach Tools Manuf 51:465–470

    Article  Google Scholar 

  10. Sadowski M, Ladani L, Brindley W, Romano J (2016) Optimizing quality of additively manufactured Inconel 718 using powder bed laser melting process. Additive Manufacturing 11:60–70

    Article  Google Scholar 

  11. Casalino G, Campanelli SL, Contuzzi N, Ludovico AD (2015) Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel. Opt Laser Technol 65:151–158

    Article  Google Scholar 

  12. Promoppatum P, Onler R, Yao S-C (2017) Numerical and experimental investigations of micro and macro characteristics of direct metal laser sintered Ti-6Al-4V products. J Mater Process Technol 240:262–273

    Article  Google Scholar 

  13. Casalino G, Campanelli SL, Contuzzi N, Ludovico AD (2015) Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel. Opt Laser Technol 65:151–158

    Article  Google Scholar 

  14. Moussaoui K, Rubio W, Mousseigne M, Sultan T, Rezai F (2018) Effects of selective laser melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties. Mater Sci Eng A 735:182–190

    Article  Google Scholar 

  15. Read N, Wang W, Essa K, Attallah MM (2015) Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development. Mater Des (1980-2015) 65:417–424

    Article  Google Scholar 

  16. Uddin SZ, Espalin D, Mireles J, Morton P, Terrazas C, Collins S, Murr LE, Wicker R (2016) Laser powder bed fusion fabrication and characterization of crack-free aluminum alloy 6061 using in-process powder bed induction heating. In Proceedings of the Solid Free. Fabr. Symp. pp. 214–227

  17. Bertoli US, Wolfer AJ, Matthews MJ, Delplanque J-PR, Schoenung JM (2017) On the limitations of volumetric energy density as a design parameter for selective laser melting. Mater Des 113:331–340

    Article  Google Scholar 

  18. Tang M, Pistorius PC, Beuth JL (2017) Prediction of lack-of-fusion porosity for powder bed fusion. Addit Manuf 14:39–48

    Article  Google Scholar 

  19. Shipley H, McDonnell D, Culleton M, Lupoi R, O’Donnell G, Trimble D (2018) Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: a review. Int J Mach Tools Manuf 128:1–20

    Article  Google Scholar 

  20. Song B, Dong S, Zhang B, Liao H, Coddet C (2012) Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V. Mater Des 35:120–125

    Article  Google Scholar 

  21. Gong H, Rafi K, Gu H, Starr T, Stucker B (2014) Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes. Addit Manuf 1:87–98

    Article  Google Scholar 

  22. Hann DB, Iammi J, Folkes J (2011) A simple methodology for predicting laser-weld properties from material and laser parameters. J Phys D Appl Phys 44:445401

    Article  Google Scholar 

  23. King WE, Barth HD, Castillo VM, Gallegos GF, Gibbs JW, Hahn DE, Kamath C, Rubenchik AM (2014) Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing. J Mater Process Technol 214:2915–2925

    Article  Google Scholar 

  24. Li R, Liu J, Shi Y, Wang L, Jiang W (2012) Balling behavior of stainless steel and nickel powder during selective laser melting process. Int J Adv Manuf Technol 59:1025–1035

    Article  Google Scholar 

  25. Oyar P (2018) Laser sintering technology and balling phenomenon. Photomed Laser Surg 36:72–77

    Article  Google Scholar 

  26. Kanazawa M, Iwaki M, Minakuchi S, Nomura N (2014) Fabrication of titanium alloy frameworks for complete dentures by selective laser melting. J Prosthet Dent 112:1441–1447

    Article  Google Scholar 

  27. Yadroitsev I, Gusarov A, Yadroitsava I, Smurov I (2010) Single track formation in selective laser melting of metal powders. J Mater Process Technol 210:1624–1631

    Article  Google Scholar 

  28. Rosenthal D (1941) Mathematical theory of heat distribution during welding and cutting. Weld J 20:220–234

    Google Scholar 

  29. Bontha S, Klingbeil NW, Kobryn PA, Fraser HL (2009) Effects of process variables and size-scale on solidification microstructure in beam-based fabrication of bulky 3D structures. Mater Sci Eng A 513–514:311–318

    Article  Google Scholar 

  30. Promoppatum P, Yao S-C, Pistorius PC, Rollett AD (2017) A comprehensive comparison of the analytical and numerical prediction of the thermal history and solidification microstructure of Inconel 718 products made by laser powder-bed fusion. Engineering 3:685–694

    Article  Google Scholar 

  31. Beuth J, Klingbeil N (2001) The role of process variables in laser-based direct metal solid freeform fabrication. JOM 53:36–39

    Article  Google Scholar 

  32. Nguyen NT, Ohta A, Matsuoka K, Suzuki N, Maeda Y Analytical solutions for transient temperature of semi-infinite body subjected to 3-D moving heat sources, p 10

  33. Gladush GG, Smurov I (2011) Physics of laser materials processing: theory and experiment; Springer Science & Business Media, Vol. 146; ISBN 3-642-19831-7.

  34. Rubenchik AM, King WE, Wu SS (2018) Scaling laws for the additive manufacturing. J Mater Process Technol 257:234–243

    Article  Google Scholar 

  35. Promoppatum P, Yao S-C, Pistorius PC, Rollett AD, Coutts PJ, Lia F, Martukanitz R (2018) Numerical modeling and experimental validation of thermal history and microstructure for additive manufacturing of an Inconel 718 product. Progress in Additive Manufacturing:1–18. https://link.springer.com/journal/40964

  36. Li Y, Gu D (2014) Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder. Mater Des 63:856–867

    Article  Google Scholar 

  37. Kusuma C (2016) The effect of laser power and scan speed on melt pool characteristics of pure titanium and Ti-6Al-4V alloy for selective laser melting.

  38. Kusuma C, Ahmed SH, Mian A, Srinivasan R (2017) Effect of laser power and scan speed on melt pool characteristics of commercially pure titanium (CP-Ti). J Mater Eng Perform 26:3560–3568

    Article  Google Scholar 

  39. Cheng B, Lydon J, Cooper K, Cole V, Northrop P, Chou K (2018) Melt pool sensing and size analysis in laser powder-bed metal additive manufacturing. J Manuf Process 32:744–753

    Article  Google Scholar 

  40. Steuben JC, Birnbaum AJ, Michopoulos JG, Iliopoulos AP (2019) Enriched analytical solutions for additive manufacturing modeling and simulation. Addit Manuf 25:437–447

    Article  Google Scholar 

  41. Gong H, Rafi K, Starr T, Stucker B (2013) The effects of processing parameters on defect regularity in Ti-6Al-4V parts fabricated by selective laser melting and electron beam melting. In Proceedings of the 24th Annual International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference, Austin, TX, pp. 12–14.

  42. Choi J-P, Shin G-H, Yang S, Yang D-Y, Lee J-S, Brochu M, Yu J-H (2017) Densification and microstructural investigation of Inconel 718 parts fabricated by selective laser melting. Powder Technol 310:60–66

    Article  Google Scholar 

Download references

Acknowledgement

The authors wish to acknowledge the NextManufacturing Center at Carnegie Mellon University for fabricating samples as well as Dr. Alexander M. Rubenchik, Dr. Vitoon Uthaisangsuk, and Dr. Chettapong Janya-anurak for fruitful discussion. The research was supported by Research Strengthening Project of the Faculty of Engineering, King Mongkut’s University of Technology Thonburi.

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, Faculty of Engineering, King Mongkut’s University of Technology Thonburi, 126 Pracha Uthit Rd., Bang Mod, Thung Khru, Bangkok, 10140, Thailand

    Patcharapit Promoppatum

  2. Department of Mechanical Engineering, Carnegie Mellon University, 5000 Forbes Ave., Pittsburgh, PA, 15213, USA

    Shi-Chune Yao

Authors
  1. Patcharapit Promoppatum
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Shi-Chune Yao
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Shi-Chune Yao.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Promoppatum, P., Yao, SC. Analytical evaluation of defect generation for selective laser melting of metals. Int J Adv Manuf Technol 103, 1185–1198 (2019). https://doi.org/10.1007/s00170-019-03500-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-019-03500-z

Keywords

Search

Navigation