Abstract
Companies currently are immersed in a highly competitive world; therefore, they must adopt continuous process and product improvement techniques to remain in business and retain loyal customers. This paper presents the analysis of a medical device manufacturing company to determine what factors influence the length variation of plastic tubes in a cutting process. These tubes are part of intensive care sets; therefore, their length and diameter are critical features. Recently, products were rejected for not meeting the tube length specification, causing customer complaints regarding product quality. The Taguchi method was applied to find significant factors that determine the best configuration in the cutting process to approximate this quality characteristic to its desired target value. Important factors and their corresponding best levels were identified. After the proposed process adjustment was implemented, the process capability index (Cpk) increased from 0.90 to 1.58, which indicated a considerable reduction in customer complaints and corresponding costs.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Escanciano C, Iglesias F (2012) Quality management and integrated total quality in Spanish mining: results of an empirical study. DYNA 171:167–174
Sitnikov C (2012) Six sigma as a strategic tool for companies. Young Econ J Rev Tinerilor Econ 19:94–102
Vijaya SM (2013) Synergies of lean six sigma. IUP J Oper Manag 1:21–31
Gil-Gómez H, Oltra-Badenes R, Adarme-Jaimes W (2014) Service quality management based on the application of the ITIL standard. DYNA 186:51–56. http://dx.doi.org/10.15446/dyna.v81n186.37953
Antony J, Capon N (1998) Teaching experimental design techniques to industrial engineers. Int J Eng Educ 5:335–343. doi:10.1108/00438020110391873
Mathews PG (2005) Design of experiments with Minitab; ASQ Quality press. Milwaukee, USA
Antony J, Antony FJ (2001) Teaching the Taguchi method to industrial engineers. Work Study 4:141–149. doi:10.1108/00438020110391873
Peker M, Sen B, Kumru PY (2012) An efficient solving of the traveling salesman problem: the ant colony system having parameters optimized by the Taguchi method. Turkish J Electric Eng Comput Sci 1:2015–2036. doi:10.3906/elk-1109-44
Antony J, Perry D, Wang C, Kumar M (2006) An application of Taguchi method experimental design for new product design and development process. Assem Autom 1:18–24. doi:10.1108/01445150610645611
Agastra E, Pelosi G, Selleri S, Taddei R (2013) Taguchi’s method for multi-objective optimization problems. Int J RF Microwave Comput Aided Eng 3:357–366. doi:10.1002/mmce.20680
Roy RK (2001) Design of experiments using the Taguchi approach: 16 steps to product and process improvement. John Wiley & Sons Inc, New York, USA
Taguchi G, Jugulum R (2002) The Mahalanobis-Taguchi strategy: a pattern technology system. John Wiley & Sons, New York, USA
Gu F, Hall P, Miles NJ, Ding Q, Wu T (2014) Improvement of mechanical properties of recycled plastic blends via optimizing processing parameters using the Taguchi method and principal component analysis. Mater Des 62:189–198. doi:10.1016/j.matdes.2014.05.013
Inei-Shizukawa G, Velasco-Bedrán HA, Gutiérrez-López GF, Hernández-Sánchez H (2009) Statistical approach to optimization of ethanol fermentation by saccharomyces cerevisiae in the presence of Valfor® 100 Zeolite Naa. Revista de Ingeniería Química 3:265–270
Rico L, Noriega S, Garcia JL, Martinez EA, Ñeco R, Estrada FJ (2010) Effect of the side cutting–edge angle on the surface roughness for aluminum 1350 in the turning operation by Taguchi method. J Appl Res Technol 3:395–405
Taguchi G, Chowdhury S, Wu Y (2005) Taguchi’s quality engineering handbook. John Wiley & Sons, New Jersey, USA
Akbarzadeh A, Kouravand S, Imani B (2013) Robust design of a bimetallic micro thermal sensor using Taguchi method. J Optim Theory Appl 1:188–198. doi:10.1007/s10957-012-0171-x
Ramkumar R, Ragupathy A (2013) Optimization of cooling tower performance analysis using Taguchi method. Therm Sci 2:457–470. doi:10.2298/TSCI110528024R
Senthilkumar N, Ganapathy T, Tamizharasan T (2014) Optimization of machining and geometrical parameters in turning process using Taguchi method. Aust J Mech Eng 2:233–246
Deniz F (2013) Optimization of biosorption conditions for color removal by Taguchi DOE methodology. Environmental Progress and Sustainable Energy 32(4):1129–1133. doi:10.1002/ep.11740
KoonChun L, SooKing L, Pehchiong T (2015) Optimization of electrostatic separation process for maximizing biowaste recovery using Taguchi method and ANOVA. Polish Journal of Environmental Studies 3:1125–1131. doi: 10.15244/pjoes/30927
Chil-Chyuan K, Hsin-You L (2015) Dimensional accuracy optimization of the micro-plastic injection molding process using the Taguchi design method. Mater Sci Medziagotyra 2:244–248. doi:10.5755/j01.mm.21.2.5864
Sun Y, Zuo D, Zhu Y, Li J (2013) Using Taguchi method to optimize polishing parameters in ice fixed abrasive polishing. Mater Manuf Process 28:923–927. doi:10.1080/10426914.2013.792419
Montgomery DC (2009) Design and analysis of experiments, 7th edn. John Wiley & Sons, New Jersey, USA
Co HC (2008) Confirmation testing of the Taguchi methods by artificial neural-networks simulation. Int J Prod Res 17:4671–4685. doi:10.1080/00207540701213502
Chun-Liang L, Yi-Shun C, Yi-Hua L, Yeh-Hsiang H, Shu-Syuan H (2013) Optimization of a fuzzy-logic-control-based five-stage battery charger using a fuzzy-based Taguchi method. Energies 7:3528–3547. doi:10.3390/en6073528
Recioui A (2013) Application of hybrid Taguchi-genetic algorithm to the multiobjective design optimization of Yagi-Uda Atennas. Wirel Pers Commun 2:1403–1420. doi:10.1007/s11277-012-0882-1
Recioui A, Bentarzi H (2013) Capacity optimization of MIMO wireless communications systems using a hybrid genetic-Taguchi algorithm. Wirel Pers Commun 2:1003–1019. doi:10.1007/s11277-012-0857-2
Chao-Lieh Y, Kun-Tzu Y (2013) Multi-objective optimization of glass fiber cutting process by applying the fuzzy-based Taguchi method. Int J Reliab Qual Saf Eng 2:1–17. doi:10.1142/S0218539313500083
Canessa E, Bielenberg G, Allende H (2014) Robust design in multiobjective systems using Taguchi’s parameter design approach and a Pareto genetic algorithm. Revista Facultad de Ingeniería Universidad de Antioquia 72:73–86
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Limon-Romero, J., Tlapa, D., Baez-Lopez, Y. et al. Application of the Taguchi method to improve a medical device cutting process. Int J Adv Manuf Technol 87, 3569–3577 (2016). https://doi.org/10.1007/s00170-016-8623-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-8623-3