Abstract
Resistance spot welding (RSW) is a popular welding process employed for joining sheet metals typically in automobile and aerospace industries. RSW is conventional but not obsolete as it addresses the desirable characteristics of energy efficiency, narrow heat-affected zone (HAZ), simplicity, and automation that make it the first choice of manufacturers. In recent days, there is a perpetual demand for spot welding owing to its suitability for joining components especially in biomedical applications. Austenitic stainless steel of grade AISI 316L, a biocompatible material with extraordinary features and global suitability, caters to several industrial dimensions. In this research paper, an attempt is made to experimentally investigate the quality of the weld prepared by resistance spot welding of austenitic stainless steel type 316L of equal thickness (2.0 + 2.0 mm). Experimental trials based on design of experiments (DOE) are conducted by varying the process parameters such as electrode tip diameter, welding current, and heating time and subsequently measure the nugget size and shape which governs the strength and bond integrity of the resistance spot welds. Subsequently, a coupled structural-thermo-electric analysis is performed to analyse the transient temperature field for predicting the nugget formation during RSW of 316L stainless sheet using a 2D axisymmetric finite element (FE) model. FE-based model of RSW process is developed using ANSYS Parametric Design Language (APDL) module available in FE package, ANSYS. Thermo-physical interactions like heat transfer through the Joule effect, the effect of latent heat of fusion, and the thermal and electrical contact conductance are considered while developing the FE-based model. A good coherence is achieved between numerical predictions of nugget shape and experimental spot-welded results. Finally, the welded specimens are subjected to destructive testing and metallurgical characterizations to evaluate its strength and quality.
Similar content being viewed by others
References
Lei ZZ, Kang HT, Liu YG (2011) Finite element analysis for transient thermal characteristics of resistance spot welding process with three sheets assemblies. Procedia Eng 16:622–631
Ma N, Murakawa H (2009) Numerical and experimental study on nugget formation in resistance spot welding for high strength steel sheets in automobile bodies. Trans JWRI 38(2):19–24
Hryniewicz T, Rokosz K, Filippi M (2009) Biomaterial studies on AISI 316L stainless steel after magnetoelectropolishing. Materials 2:129–145
Charde N (2013) An experimental investigation on spot weld growth on dissimilar joints of 304L austenitic stainless steel and medium carbon steel (part 1). Int J Adv Appl Sci 2(1):25–32
Eshraghi M, Tschopp MA, Zaeem MA, Felicelli SD (2013) A parametric study of resistance spot welding of a dual-phase steel using finite element analysis. In: Marquis F (ed) PRICM: 8 pacific Rim international congress on advanced materials and processing. Wiley, Hoboken
Zhang H, Hou Y, Zhang J, Qi X, Wang F (2015) A new method for nondestructive quality evaluation of the resistance spot welding based on the radar chart method and the decision tree classifier. Int J Adv Manuf Technol 78:841–851
Zhang Y, Luo Z, Li Y, Liu ZM, Huang ZY (2015) Microstructure characterization and tensile properties of Mg/Al dissimilar joints manufactured by thermo-compensated resistance spot welding with Zn interlayer. Mater Des 75:166–173
Raoelison R, Fuentes A, Pouvreau C, Rogeon P, Carre P, Dechalotte F (2014) Modeling and numerical simulation of the resistance spot welding of zinc coated steel sheets using rounded tip electrode: analysis of required conditions. Appl Math Model 38(9):2505–2521
Spitz M, Fleischanderl M, Sierlinger R, Reischauer M, Perndorfer F, Fafilek G (2015) Surface lubrication influence on electrode degradation during resistance spot welding of hot dip galvanized steel sheets. J Mater Process Technol 216:339–347
Kong JP, Han TK, Chin KG, Park BG, Kang CY (2014) Effect of boron content and welding current on the mechanical properties of electrical resistance spot welds in complex-phase steels. Mater Des 54:598–609
Kianersi D, Mostafaei A, Amadeh AA (2014) Resistance spot welding joints of AISI 316L austenitic stainless steel sheets: phase transformations, mechanical properties and microstructure characterizations. Mater Des 61:251–263
Saha DC, Cho Y, Park YD (2013) Metallographic and fracture characteristics of resistance spot welded TWIP steels. Sci Technol Weld Join 18(8):711–720
Tsai CL, Dai WL, Dickinson DW, Papritan JC (1991) Analysis and development of a real-time control methodology in resistance spot welding, welding research supplement 339s-351s
Ho CY, Chu TK (1977) Electrical resistivity and thermal conductivity of nine selected AISI stainless steels, Cindas Report 45, American Iron and Steel Institute
(2008)Thermophysical properties of materials for nuclear engineering: a tutorial and collection of data, International Atomic Energy Agency, Vienna
Rohsenow WM, Hartnett JR, Cho YI (1998) Handbook of heat transfer, 3rd edn. McGraw-hill, New York
Wu KC (1975) Resistance spot welding of high contact-resistance surfaces for weld bonding, Welding Research Supplement 436s – 442s
Zhao Y, Zhang Y, Lai X, Wang P (2013) Resistance spot welding of ultra-thin automotive steel. J Manuf Sci Eng 135:021012–1 – 10
Sun X, Dong P (2000) Analysis of aluminum resistance spot welding processes using coupled finite element procedures Welding Research Supplement. 215s – 221s
Deshmukh H, Burande DH, Shukla S, Kamble P (2014) Strength analysis of resistance spot weld and weld-bonded single lap joints. Int J Mech Ind Technol 2(1):170–179
(2010)Handbook for resistance spot welding Miller Electric Mfg. Co. Appleton
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jagadeesha T., Jothi, T.J.S. Studies on the influence of process parameters on the AISI 316L resistance spot-welded specimens. Int J Adv Manuf Technol 93, 73–88 (2017). https://doi.org/10.1007/s00170-015-7693-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7693-y