Abstract
Fiber-reinforced polymer composites with excellent chemical and mechanical properties were extensively used in aerospace, automotive, marine, civil, and sports applications. Mechanical and chemical durability of the polymer composites depended upon the interphase bonding between the fiber/matrix interphases. Surface modifications of synthetic fiber surface have profound importance as they improve wettability, adhesion, and surface roughness. This chapter provides an overview on surface treatments adopted for the synthetic fibers such as glass, carbon, and aramid. The common surface modification processes such as silane, plasma, acid treatments, and nanofiber coatings have been employed in the synthetic fiber industry. The surface treatments of the synthetic fibers increase the intensity of reactive sites in the matrix/fiber interphase and aid in improving the bonding between the matrix and the fibers.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
V.R. Arun Prakash, A. Rajadurai, Inter laminar shear strength behavior of acid, base and silane treated E-glass fibre epoxy resin composites on drilling process. Defence Technol. 13(1), 40–46 (2017). https://doi.org/10.1016/j.dt.2016.11.004
M. Baghery Borooj, A. Mousavi Shoushtari, A. Haji, E. Nosratian Sabet, Optimization of plasma treatment variables for the improvement of carbon fibres/epoxy composite performance by response surface methodology. Compos. Sci. Technol. 128, 215–221 (2016a). https://doi.org/10.1016/j.compscitech.2016.03.020
M. Baghery Borooj, A. Mousavi Shoushtari, E. Nosratian Sabet, A. Haji, Influence of oxygen plasma treatment parameters on the properties of carbon fiber. J. Adhes. Sci. Technol. 30(21), 2372–2382 (2016b). https://doi.org/10.1080/01694243.2016.1182833
R.S. Chen, Y.H. Muhammad, S. Ahmad, Physical, mechanical and environmental stress cracking characteristics of epoxy/glass fiber composites: Effect of matrix/fiber modification and fiber loading. Polym. Test. 96, 107088 (2021). https://doi.org/10.1016/j.polymertesting.2021.107088
A.T. DiBenedetto, Tailoring of interfaces in glass fiber reinforced polymer composites: A review. Mater. Sci. Eng. A 302(1), 74–82 (2001). https://doi.org/10.1016/S0921-5093(00)01357-5
N. Dilsiz, G. Akovali, Effects of plasma surface modification on the mechanical properties of carbon fiber and carbon fiber/epoxy composite. Composite Interf. 3(5–6), 344–369 (1995). https://doi.org/10.1163/156855496X00056
M. Garg, S. Sharma, R. Mehta, Processing of functionalized and pristine carbon nanotube epoxy composites with Silane-treated glass fiber. Mater. Manuf. Process. 31(15), 2044–2056 (2016). https://doi.org/10.1080/10426914.2016.1176186
A. Garton, J.H. Daly, Characterization of the aramid: Epoxy and carbon: Epoxy interphases. Polym. Compos. 6(4), 195–200 (1985). https://doi.org/10.1002/pc.750060403
R.F. Gibson, Principles of Composite Material Mechanics (MacGraw-Hill, Inc, 1994). https://doi.org/10.2214/ajr.159.6.1442392
P.M. Gore, B. Kandasubramanian, Functionalized aramid fibers and composites for protective applications: A review. Ind. Eng. Chem. Res. 57(49), 16537–16563 (2018). https://doi.org/10.1021/acs.iecr.8b04903
C. Griswold, W.M. Cross, L. Kjerengtroen, J.J. Kellar, Interphase variation in silane-treated glass-fiber-reinforced epoxy composites. J. Adhes. Sci. Technol. 19(3–5), 279–290 (2005). https://doi.org/10.1163/1568561054352649
F. Guo, Z.Z. Zhang, W.M. Liu, F.H. Su, H.J. Zhang, Effect of plasma treatment of Kevlar fabric on the tribological behavior of Kevlar fabric/phenolic composites. Tribol. Int. 42(2), 243–249 (2009). https://doi.org/10.1016/j.triboint.2008.06.004
J.G. Iglesias, J. González-Benito, A.J. Aznar, J. Bravo, J. Baselga, Effect of glass fiber surface treatments on mechanical strength of epoxy based composite materials. J. Colloid Interface Sci. 250(1), 251–260 (2002). https://doi.org/10.1006/jcis.2002.8332
Y.-W.M. Jang-Kyo Kim, Engineered Interfaces in Fiber Reinforced Composites (Elsevier Science Publishers B.V., 1998). https://doi.org/10.1016/b978-0-08-042695-2.x5000-3
W. Li, D. Xiang, L. Wang, E. Harkin-Jones, C. Zhao, B. Wang, Y. Li, Simultaneous enhancement of electrical conductivity and interlaminar fracture toughness of carbon fiber/epoxy composites using plasma-treated conductive thermoplastic film interleaves. RSC Adv. 8(47), 26910–26921 (2018). https://doi.org/10.1039/c8ra05366a
T.-M. Liu, J.H. Yuan-Suo Zheng, Surface modification of aramid fibers with new chemical method for improving interfacial bonding strength with epoxy resin. J. Appl. Polym. Sci. 118(5), 2541–2552 (2010). https://doi.org/10.1002/app.32478
K. Ma, P. Chen, B. Wang, X.X. Guiling Cui, A study of the effect of oxygen plasma treatment on the interfacial properties of carbon fiber/epoxy composites Keming. J. Appl. Polym. Sci. 116(5), 2658–2667 (2010). https://doi.org/10.1002/app
P K Mallick. (2007). Fiber- Reinforced Composites Materials, Manufacturing and Design. CRC Press Taylor & Francis Group (Third). https://doi.org/10.1016/j.engfracmech.2008.09.002
M.A. Montes-Morán, R.J. Young, Raman spectroscopy study of HM carbon fibres: Effect of plasma treatment on the interfacial properties of single fibre/epoxy composites. Part I: Fibre characterisation. Carbon 40(6), 845–855 (2002). https://doi.org/10.1016/S0008-6223(01)00212-3
J. Nasser, J. Lin, K. Steinke, H.A. Sodano, Enhanced interfacial strength of aramid fiber reinforced composites through adsorbed aramid nanofiber coatings. Compos. Sci. Technol. 174(February), 125–133 (2019). https://doi.org/10.1016/j.compscitech.2019.02.025
D. Olmos, R. Lo, The nature of the glass fibre surface and its effect in the water absorption of glass fibre/epoxy composites. The use of fluorescence to obtain information at the interface. Compos. Sci. Technol. 66, 2758–2768 (2006). https://doi.org/10.1016/j.compscitech.2006.03.004
N.H. Padmaraj, K.M. Vijaya, P. Dayananda, Experimental study on the tension-tension fatigue behaviour of glass/epoxy quasi-isotropic composites. J. King Saud Univ. Eng. Sci xxxx, 0–5 (2019). https://doi.org/10.1016/j.jksues.2019.04.007
N.H. Padmaraj, K.M. Vijaya, P. Dayananda, Experimental investigation on fatigue behaviour of glass/epoxy quasi-isotropic laminate composites under different ageing conditions. Int. J. Fatigue 143 (2021). https://doi.org/10.1016/j.ijfatigue.2020.105992
S. Palola, J. Vuorinen, J.W.M. Noordermeer, E. Sarlin, Development in additive methods in aramid fiber surface modification to increase fiber-matrix adhesion: A review. Coatings 10(6) (2020). https://doi.org/10.3390/COATINGS10060556
Y. Ren, C. Wang, Y. Qiu, Influence of aramid fiber moisture regain during atmospheric plasma treatment on aging of treatment effects on surface wettability and bonding strength to epoxy. Appl. Surf. Sci. 253(23), 9283–9289 (2007). https://doi.org/10.1016/j.apsusc.2007.05.054
S. Safi, A. Zadhoush, M. Ahmadi, S.P.R. Tehrani, Hybrid silane-treated glass fabric/epoxy composites: Tensile properties by micromechanical approach. Iranian Poly. J. (English Edition) 27(1), 1–11 (2018). https://doi.org/10.1007/s13726-017-0578-1
T.P. Sathishkumar, S. Satheeshkumar, J. Naveen, Glass fiber-reinforced polymer composites – A review. J. Reinf. Plast. Compos. 33(13), 1258–1275 (2014). https://doi.org/10.1177/0731684414530790
K. Sever, M. Sarikanat, Y. Seki, V. Cecen, I.H. Tavman, Effects of fiber surface treatments on mechanical properties of epoxy composites reinforced with glass fabric. J. Mater. Sci. 43(13), 4666–4672 (2008). https://doi.org/10.1007/s10853-008-2679-x
M. Sharma, S. Gao, E. Mäder, H. Sharma, L.Y. Wei, J. Bijwe, Carbon fiber surfaces and composite interphases. Compos. Sci. Technol. 102, 35–50 (2014). https://doi.org/10.1016/j.compscitech.2014.07.005
J. Shi, Y. Yamamoto, M. Mizuno, C. Zhu, Interfacial performance enhancement of carbon fiber/epoxy composites by a two-step surface treatment. J. Mech. Sci. Technol. 35(1), 91–97 (2021). https://doi.org/10.1007/s12206-020-1208-y
Y. Sun, Q. Liang, H. Chi, Y. Zhang, Y. Shi, D. Fang, F. Li, The application of gas plasma technologies in surface modification of aramid fiber. Fibers Polym. 15(1), 1–7 (2014). https://doi.org/10.1007/s12221-014-0001-x
L. Wang, Y. Shi, R. Sa, N. Ning, W. Wang, M. Tian, L. Zhang, Surface modification of aramid fibers by catechol/polyamine codeposition followed by silane grafting for enhanced interfacial adhesion to rubber matrix. Ind. Eng. Chem. Res. 55(49), 12547–12556 (2016). https://doi.org/10.1021/acs.iecr.6b03177
H. Wang, K. Jin, C. Wang, X. Guo, Z. Chen, J. Tao, Effect of fiber surface functionalization on shear behavior at carbon fiber/epoxy interface through molecular dynamics analysis. Compos. A: Appl. Sci. Manuf. 126(August), 105611 (2019). https://doi.org/10.1016/j.compositesa.2019.105611
H. Watanabe, M. Furukawa, T. Takata, M. Yamamoto, Surface improvement of aramid fibers by physical treatments. Macromol. Symp. 159(1), 131–141 (2000). https://doi.org/10.1002/1521-3900(200010)159:1%3C131::AID-MASY131%3E3.0.CO;2-J
L. Xing, L. Liu, Y. Huang, D. Jiang, B. Jiang, J. He, Enhanced interfacial properties of domestic aramid fiber-12 via high energy gamma ray irradiation. Compos. Part B 69, 50–57 (2015). https://doi.org/10.1016/j.compositesb.2014.09.027
F. Xu, W. Fan, Y. Zhang, Y. Gao, Z. Jia, Y. Qiu, D. Hui, Modification of tensile, wear and interfacial properties of Kevlar fibers under cryogenic treatment. Compos. Part B 116, 398–405 (2017). https://doi.org/10.1016/j.compositesb.2016.10.082
J. Zhao, Effect of surface treatment on the structure and properties of Para-aramid fibers by phosphoric acid. Fibers Polym. 14(1), 59–64 (2013). https://doi.org/10.1007/s12221-013-0059-x
N. Zheng, J. He, D. Zhao, Y. Huang, J. Gao, Y.W. Mai, Improvement of atomic oxygen erosion resistance of carbon fiber and carbon fiber/epoxy composite interface with a silane coupling agent. Mater. Des. 109, 171–178 (2016). https://doi.org/10.1016/j.matdes.2016.07.004
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Springer Nature Singapore Pte Ltd.
About this entry
Cite this entry
Padmaraj, N.H. (2022). Chemical Modification and Fabrication of Epoxy/Synthetic Fiber Composites. In: Mavinkere Rangappa, S., Parameswaranpillai, J., Siengchin, S., Thomas, S. (eds) Handbook of Epoxy/Fiber Composites . Springer, Singapore. https://doi.org/10.1007/978-981-19-3603-6_2
Download citation
DOI: https://doi.org/10.1007/978-981-19-3603-6_2
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-3602-9
Online ISBN: 978-981-19-3603-6
eBook Packages: Chemistry and Materials ScienceReference Module Physical and Materials ScienceReference Module Chemistry, Materials and Physics