Abstract
Microbial fuel cells (MFCs) are bioelectrochemical systems that directly convert chemical energy contained in organic matters like wastewaters into electrical energy by utilizing the metabolic (catalytic) activity of microorganisms (Kim et al. 1999; Bond and Lovley 2003). In the anode chamber of MFC, the substrates are oxidized by electroactive bacteria to produce carbon dioxide with electrons (e−) and protons (H+) (Logan and Regan 2006). The generated e− get transported to the cathode through the outside circuit, while H+ will transfer through the electrolyte and reach the cathode. Additionally, the electrons and protons mix with the oxygen molecule and reduced to a water molecule on the cathode. The oxygen reduction reaction (ORR) at the cathode is considered a rate limiting step due to its heterogenic nature. An efficient catalyst is, therefore, required to reduce the cathodic overpotential (Chandrasekhar 2019). The costly noble metal dust platinum was used during the early phase of research; however, recently different types of nonmetal materials were applied such as metal-based catalysts, carbon-based catalysts, carbon–metal hybrid catalysts, and metal–nitrogen–carbon advanced catalysts for efficient ORR (Clauwaert et al. 2008). The performances of MFCs having different ORR catalysts were compared in terms of power output. In certain cases, biocathode was utilized for ORR. The present chapter broadly discussed the varied cathode catalysts used for the oxidation–reduction reactions in MFCs. The chapter included the synthesis procedure of ORR catalyst, nature, stability, and electrochemical performance as cathode catalysts. This chapter is expected to deliver an understanding of the applications of cathode catalysts in MFCs to boost method efficiency furthermore as to build the method economically viable.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Aelterman, P., Versichele, M., Genettello, E., Verbeken, K., & Verstraete, W. (2009). Microbial fuel cells operated with iron-chelated air cathodes. Electrochimica Acta, 54, 5754–5760. https://doi.org/10.1016/j.electacta.2009.05.023
Anderson, A. B., Roques, J., Mukerjee, S., Murthi, V. S., Markovic, N. M., & Stamenkovic, V. (2005). Activation energies for oxygen reduction on platinum alloys: Theory and experiment. The Journal of Physical Chemistry. B, 109, 1198–1203. https://doi.org/10.1021/jp047468z
Birry, L., Mehta, P., Jaouen, F., Dodelet, J.-P., Guiot, S. R., & Tartakovsky, B. (2011). Application of iron-based cathode catalysts in a microbial fuel cell. Electrochimica Acta, 56, 1505–1511. https://doi.org/10.1016/j.electacta.2010.08.019
Bocchetta, P., Sánchez, C. R., Taurino, A., & Bozzini, B. (2016). Accurate assessment of the oxygen reduction electrocatalytic activity of Mn/polypyrrole nanocomposites based on rotating disk electrode measurements, complemented with multitechnique structural characterizations. Journal of Analytical Methods in Chemistry, 2016, 2030675. https://doi.org/10.1155/2016/2030675
Bond, D. R., & Lovley, D. R. (2003). Electricity production by geobacter sulfurreducens attached to electrodes. Applied and Environmental Microbiology, 69, 1548–1555. https://doi.org/10.1128/AEM.69.3.1548-1555.2003
Cao, C., Wei, L., Su, M., Wang, G., & Shen, J. (2016). Enhanced power generation using nano cobalt oxide anchored nitrogen-decorated reduced graphene oxide as a high-performance air-cathode electrocatalyst in biofuel cells. RSC Advances, 6, 52556–52563. https://doi.org/10.1039/C6RA11095A
Chandrasekhar, K. (2019). Chapter 3.5 - Effective and nonprecious cathode catalysts for oxygen reduction reaction in microbial fuel cells. In S. V. Mohan, S. Varjani, & A. Pandey (Eds.), Microbial electrochemical technology, biomass, biofuels and biochemicals (pp. 485–501). London: Elsevier. https://doi.org/10.1016/B978-0-444-64052-9.00019-4
Clauwaert, P., Aelterman, P., Pham, T. H., Schamphelaire, L. D., Carballa, M., Rabaey, K., et al. (2008). Minimizing losses in bio-electrochemical systems: the road to applications. Applied Microbiology and Biotechnology, 79, 901–913. https://doi.org/10.1007/s00253-008-1522-2
Duteanu, N., Erable, B., Senthil Kumar, S. M., Ghangrekar, M. M., & Scott, K. (2010). Effect of chemically modified Vulcan XC-72R on the performance of air-breathing cathode in a single-chamber microbial fuel cell. Bioresource Technology, 101, 5250–5255. https://doi.org/10.1016/j.biortech.2010.01.120
Ge, B., Li, K., Fu, Z., Pu, L., & Zhang, X. (2015). The addition of ortho-hexagon nano spinel Co3O4 to improve the performance of activated carbon air cathode microbial fuel cell. Bioresource Technology, 195, 180–187. https://doi.org/10.1016/j.biortech.2015.06.054
Ge, B., Li, K., Fu, Z., Pu, L., Zhang, X., Liu, Z., et al. (2016). The performance of nano urchin-like NiCo2O4 modified activated carbon as air cathode for microbial fuel cell. Journal of Power Sources, 303, 325–332. https://doi.org/10.1016/j.jpowsour.2015.11.003
Gewirth, A. A., Varnell, J. A., & DiAscro, A. M. (2018). Nonprecious metal catalysts for oxygen reduction in heterogeneous aqueous systems. Chemical Reviews, 118, 2313–2339. https://doi.org/10.1021/acs.chemrev.7b00335
Ghasemi, M., Ismail, M., Kamarudin, S. K., Saeedfar, K., Daud, W. R. W., Hassan, S. H. A., et al. (2013). Carbon nanotube as an alternative cathode support and catalyst for microbial fuel cells. Applied Energy, 102, 1050–1056. https://doi.org/10.1016/j.apenergy.2012.06.003
Gurung, A., Kim, J., Jung, S., Jeon, B.-H., Yang, J. E., & Oh, S.-E. (2012). Effects of substrate concentrations on performance of serially connected microbial fuel cells (MFCs) operated in a continuous mode. Biotechnology Letters, 34, 1833–1839. https://doi.org/10.1007/s10529-012-0979-3
Harry, I. D., Saha, B., & Cumming, I. W. (2006). Effect of electrochemical oxidation of activated carbon fiber on competitive and noncompetitive sorption of trace toxic metal ions from aqueous solution. Journal of Colloid and Interface Science, 304, 9–20. https://doi.org/10.1016/j.jcis.2006.08.012
Huang, Q., Zhou, P., Yang, H., Zhu, L., & Wu, H. (2017). CoO nanosheets in situ grown on nitrogen-doped activated carbon as an effective cathodic electrocatalyst for oxygen reduction reaction in microbial fuel cells. Electrochimica Acta, 232, 339–347. https://doi.org/10.1016/j.electacta.2017.02.163
Jiang, Z.-J., & Jiang, Z. (2014). Reduction of the oxygen reduction reaction overpotential of nitrogen-doped graphene by designing it to a microspherical hollow shape. Journal of Materials Chemistry A, 2, 14071–14081. https://doi.org/10.1039/C4TA01706D
Jung, S. P., & Pandit, S. (2019). Chapter 3.1 - important factors influencing microbial fuel cell performance. In S. V. Mohan, S. Varjani, & A. Pandey (Eds.), Microbial electrochemical technology, biomass, biofuels and biochemicals (pp. 377–406). London: Elsevier. https://doi.org/10.1016/B978-0-444-64052-9.00015-7
Kakarla, R., Kuppam, C., Pandit, S., Kadier, A., & Velpuri, J. (2017). Algae—The potential future fuel: Challenges and prospects. In V. C. Kalia & P. Kumar (Eds.), Microbial applications (Bioremediation and bioenergy) (Vol. 1, pp. 239–251). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-319-52666-9_11
Khilari, S., Pandit, S., Das, D., & Pradhan, D. (2014). Manganese cobaltite/polypyrrole nanocomposite-based air-cathode for sustainable power generation in the single-chambered microbial fuel cells. Biosensors & Bioelectronics, 54, 534–540. https://doi.org/10.1016/j.bios.2013.11.044
Khilari, S., Pandit, S., Ghangrekar, M., Das, D., & Pradhan, D. (2013). Graphene supported α-MnO2 nanotubes as a cathode catalyst for improved power generation and wastewater treatment in single-chambered microbial fuel cells. RSC Advances, 3, 7902–7911. https://doi.org/10.1039/C3RA22569K
Khilari, S., Pandit, S., Varanasi, J. L., Das, D., & Pradhan, D. (2015). Bifunctional manganese ferrite/polyaniline hybrid as electrode material for enhanced energy recovery in microbial fuel cell. ACS Applied Materials & Interfaces, 7, 20657–20666. https://doi.org/10.1021/acsami.5b05273
Khilari, S., & Pradhan, D. (2018). Role of cathode catalyst in microbial fuel cell. In D. Das (Ed.), Microbial fuel cell: A bioelectrochemical system that converts waste to watts (pp. 141–163). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-319-66793-5_8
Khotseng, L. (2018). Oxygen reduction reaction. In Electrocatalysts for fuel cells and hydrogen evolution - Theory to design. London: IntechOpen. https://doi.org/10.5772/intechopen.79098
Kim, B. H., Kim, H. J., Hyun, M. S., & Park, D. H. (1999). Direct electrode reaction of Fe(III)-reducing bacterium, Shewanella putrefaciens. Journal of Microbiology and Biotechnology, 9, 127–131.
Koo, B., Lee, S.-M., Oh, S.-E., Kim, E. J., Hwang, Y., Seo, D., et al. (2019). Addition of reduced graphene oxide to an activated-carbon cathode increases electrical power generation of a microbial fuel cell by enhancing cathodic performance. Electrochimica Acta, 297, 613–622. https://doi.org/10.1016/j.electacta.2018.12.024
Li, M., Zhou, S., & Xu, M. (2017). Graphene oxide supported magnesium oxide as an efficient cathode catalyst for power generation and wastewater treatment in single chamber microbial fuel cells. Chemical Engineering Journal, 328, 106–116. https://doi.org/10.1016/j.cej.2017.07.031
Liu, J., Yu, M., Wang, X., Wu, J., Wang, C., Zheng, L., et al. (2017). Investigation of high oxygen reduction reaction catalytic performance on Mn-based mullite SmMn2O5. Journal of Materials Chemistry A, 5, 20922–20931. https://doi.org/10.1039/C7TA02905E
Liu, Q., Chen, S., Zhou, Y., Zheng, S., Hou, H., & Zhao, F. (2014). Phosphorus-doped carbon derived from cellulose phosphate as efficient catalyst for air-cathode in microbial fuel cells. Journal of Power Sources, 261, 245–248. https://doi.org/10.1016/j.jpowsour.2014.03.060
Liu, Q., Zhou, Y., Chen, S., Wang, Z., Hou, H., & Zhao, F. (2015). Cellulose-derived nitrogen and phosphorus dual-doped carbon as high performance oxygen reduction catalyst in microbial fuel cell. Journal of Power Sources, 273, 1189–1193. https://doi.org/10.1016/j.jpowsour.2014.09.102
Liu, Y., Jin, X.-J., Tuo, A.-X., & Liu, H. (2016). Improved oxygen reduction reaction activity of three-dimensional porous N-doped graphene from a soft-template synthesis strategy in microbial fuel cells. RSC Advances, 6, 105211–105221. https://doi.org/10.1039/C6RA23971D
Logan, B. E., & Regan, J. M. (2006). Microbial fuel cells—challenges and applications. Environmental Science & Technology, 40, 5172–5180. https://doi.org/10.1021/es0627592
Lu, M., Guo, L., Kharkwal, S., Wu, H., Ng, H. Y., & Li, S. F. Y. (2013). Manganese–polypyrrole–carbon nanotube, a new oxygen reduction catalyst for air-cathode microbial fuel cells. Journal of Power Sources, 221, 381–386. https://doi.org/10.1016/j.jpowsour.2012.08.034
Mallika, A., & Easton, E. B. (2013). Oxygen reduction activity of binary PtMn/C, ternary PtMnX/C (X = Fe, Co, Ni, Cu, Mo and, Sn) and quaternary PtMnCuX/C (X = Fe, Co, Ni, and Sn) and PtMnMoX/C (X = Fe, Co, Ni, Cu and Sn) alloy catalysts. Journal of Power Sources, 236, 311–320.
Mikhaylova, A. A., Tusseeva, E. K., Mayorova, N. A., Rychagov, A. Y., Volfkovich, Y. M., Krestinin, A. V., et al. (2011). Single-walled carbon nanotubes and their composites with polyaniline. Structure, catalytic and capacitive properties as applied to fuel cells and supercapacitors. Electrochimica Acta, Electrochemistry of Electroactive Materials, 56, 3656–3665. https://doi.org/10.1016/j.electacta.2010.07.021
Nam, T., Son, S., Koo, B., Hoa Tran, H. V., Kim, J. R., Choi, Y., et al. (2017). Comparative evaluation of performance and electrochemistry of microbial fuel cells with different anode structures and materials. International Journal of Hydrogen Energy, 42, 27677–27684. https://doi.org/10.1016/j.ijhydene.2017.07.180
Noori, M. T., Mukherjee, C. K., & Ghangrekar, M. M. (2017). Enhancing performance of microbial fuel cell by using graphene supported V2O5-nanorod catalytic cathode. Electrochimica Acta, 228, 513–521. https://doi.org/10.1016/j.electacta.2017.01.016
Nørskov, J. K., Rossmeisl, J., Logadottir, A., Lindqvist, L., Kitchin, J. R., Bligaard, T., et al. (2004). Origin of the overpotential for oxygen reduction at a fuel-cell cathode. The Journal of Physical Chemistry. B, 108, 17886–17892. https://doi.org/10.1021/jp047349j
Pandit, S., Balachandar, G., & Das, D. (2014). Improved energy recovery from dark fermented cane molasses using microbial fuel cells. Frontiers of Chemical Science and Engineering, 8, 43–54. https://doi.org/10.1007/s11705-014-1403-4
Pandit, S., Chandrasekhar, K., Kakarla, R., Kadier, A., & Jeevitha, V. (2017). Basic principles of microbial fuel cell: Technical challenges and economic feasibility. In V. C. Kalia & P. Kumar (Eds.), Microbial applications (Bioremediation and bioenergy) (Vol. 1, pp. 165–188). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-319-52666-9_8
Pandit, S., & Das, D. (2018). Principles of microbial fuel cell for the power generation. In D. Das (Ed.), Microbial fuel cell: A bioelectrochemical system that converts waste to watts (pp. 21–41). Cham: Springer International Publishing. https://doi.org/10.1007/978-3-319-66793-5_2
Pandit, S., Sengupta, A., Kale, S., & Das, D. (2011). Performance of electron acceptors in catholyte of a two-chambered microbial fuel cell using anion exchange membrane. Bioresource Technology, 102, 2736–2744.
Roy, S., & Pandit, S. (2019). 1.2 - Microbial electrochemical system: Principles and application. In S. V. Mohan, S. Varjani, & A. Pandey (Eds.), Microbial electrochemical technology, biomass, biofuels and biochemicals (pp. 19–48). London: Elsevier. https://doi.org/10.1016/B978-0-444-64052-9.00002-9
Rozendal, R. A., Hamelers, H. V. M., Rabaey, K., Keller, J., & Buisman, C. J. N. (2008). Towards practical implementation of bioelectrochemical wastewater treatment. Trends in Biotechnology, 26, 450–459. https://doi.org/10.1016/j.tibtech.2008.04.008
Santoro, C., Kodali, M., Kabir, S., Soavi, F., Serov, A., & Atanassov, P. (2017). Three-dimensional graphene nanosheets as cathode catalysts in standard and supercapacitive microbial fuel cell. Journal of Power Sources, 356, 371–380. https://doi.org/10.1016/j.jpowsour.2017.03.135
Santoro, C., Serov, A., Narvaez Villarrubia, C. W., Stariha, S., Babanova, S., Schuler, A. J., et al. (2015). Double-chamber microbial fuel cell with a non-platinum-group metal Fe-N-C cathode catalyst. ChemSusChem, 8, 828–834. https://doi.org/10.1002/cssc.201402570
Savizi, I. S. P., Kariminia, H.-R., & Bakhshian, S. (2012). Simultaneous decolorization and bioelectricity generation in a dual chamber microbial fuel cell using electropolymerized-enzymatic cathode. Environmental Science & Technology, 46, 6584–6593. https://doi.org/10.1021/es300367h
Scott, K., & Yu, E. H. (2015). Microbial electrochemical and fuel cells: Fundamentals and applications. Sawston: Woodhead Publishing.
Shao, M., Chang, Q., Dodelet, J.-P., & Chenitz, R. (2016). Recent advances in electrocatalysts for oxygen reduction reaction. Chemical Reviews, 116, 3594–3657. https://doi.org/10.1021/acs.chemrev.5b00462
Shih, Y.-H., Sagar, G. V., & Lin, S. D. (2008). Effect of electrode Pt loading on the oxygen reduction reaction evaluated by rotating disk electrode and its implication on the reaction kinetics. Journal of Physical Chemistry C, 112, 123–130. https://doi.org/10.1021/jp071807h
Song, C., & Zhang, J. (2008). Electrocatalytic oxygen reduction reaction. In J. Zhang (Ed.), PEM fuel cell electrocatalysts and catalyst layers: Fundamentals and applications (pp. 89–134). London: Springer. https://doi.org/10.1007/978-1-84800-936-3_2
Stephens, I. E. L., Bondarenko, A. S., Grønbjerg, U., Rossmeisl, J., & Chorkendorff, I. (2012). Understanding the electrocatalysis of oxygen reduction on platinum and its alloys. Energy & Environmental Science, 5, 6744–6762. https://doi.org/10.1039/C2EE03590A
Suryanto, B. H. R., & Zhao, C. (2016). Surface-oxidized carbon black as a catalyst for the water oxidation and alcohol oxidation reactions. Chemical Communications, 52, 6439–6442. https://doi.org/10.1039/C6CC01319H
Tang, Z., Wu, W., & Wang, K. (2018). Oxygen reduction reaction catalyzed by noble metal clusters. Catalysts, 8, 65. https://doi.org/10.3390/catal8020065
Wang, J. X., Uribe, F. A., Springer, T. E., Zhang, J., & Adzic, R. R. (2008). Intrinsic kinetic equation for oxygen reduction reaction in acidic media: The double Tafel slope and fuel cell applications. Faraday Discussions, 140, 347–362. https://doi.org/10.1039/B802218F
Watson, V. J., Nieto Delgado, C., & Logan, B. E. (2013). Influence of chemical and physical properties of activated carbon powders on oxygen reduction and microbial fuel cell performance. Environmental Science & Technology, 47, 6704–6710. https://doi.org/10.1021/es401722j
Wen, Q., Wang, S., Yan, J., Cong, L., Pan, Z., Ren, Y., et al. (2012). MnO2–graphene hybrid as an alternative cathodic catalyst to platinum in microbial fuel cells. Journal of Power Sources, 216, 187–191. https://doi.org/10.1016/j.jpowsour.2012.05.023
Wroblowa, H. S., Chi-Pan, Y., & Razumney, G. (1976). Electroreduction of oxygen: A new mechanistic criterion. Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, 69, 195–201. https://doi.org/10.1016/S0022-0728(76)80250-1
Yan, Z., Wang, M., Liu, J., Liu, R., & Zhao, J. (2014). Glycerol-stabilized NaBH4 reduction at room-temperature for the synthesis of a carbon-supported PtxFe alloy with superior oxygen reduction activity for a microbial fuel cell. Electrochimica Acta, 141, 331–339. https://doi.org/10.1016/j.electacta.2014.06.137
Yuan, H., Hou, Y., Abu-Reesh, I. M., Chen, J., & He, Z. (2016). Oxygen reduction reaction catalysts used in microbial fuel cells for energy-efficient wastewater treatment: A review. Materials Horizons, 3, 382–401. https://doi.org/10.1039/C6MH00093B
Yuan, Y., Liu, T., Fu, P., Tang, J., & Zhou, S. (2015). Conversion of sewage sludge into high-performance bifunctional electrode materials for microbial energy harvesting. Journal of Materials Chemistry A, 3, 8475–8482. https://doi.org/10.1039/C5TA00458F
Yuan, Y., Zhou, S., & Zhuang, L. (2010). Polypyrrole/carbon black composite as a novel oxygen reduction catalyst for microbial fuel cells. Journal of Power Sources, 195, 3490–3493. https://doi.org/10.1016/j.jpowsour.2009.12.026
Zhang, F., Cheng, S., Pant, D., Bogaert, G. V., & Logan, B. E. (2009). Power generation using an activated carbon and metal mesh cathode in a microbial fuel cell. Electrochemistry Communications, 11, 2177–2179. https://doi.org/10.1016/j.elecom.2009.09.024
Zhang, X., Guo, K., Shen, D., Feng, H., Wang, M., Zhou, Y., et al. (2017). Carbon black as an alternative cathode material for electrical energy recovery and transfer in a microbial battery. Scientific Reports, 7, 6981. https://doi.org/10.1038/s41598-017-07174-z
Zhang, X., Li, K., Yan, P., Liu, Z., & Pu, L. (2015). N-type Cu2O doped activated carbon as catalyst for improving power generation of air cathode microbial fuel cells. Bioresource Technology, 187, 299–304. https://doi.org/10.1016/j.biortech.2015.03.131
Zhang, Y., Hu, Y., Li, S., Sun, J., & Hou, B. (2011). Manganese dioxide-coated carbon nanotubes as an improved cathodic catalyst for oxygen reduction in a microbial fuel cell. Journal of Power Sources, 196, 9284–9289. https://doi.org/10.1016/j.jpowsour.2011.07.069
Zhang, Y., Sun, J., Hu, Y., Li, S., & Xu, Q. (2012). Bio-cathode materials evaluation in microbial fuel cells: A comparison of graphite felt, carbon paper and stainless steel mesh materials. International Journal of Hydrogen Energy, 37, 16935–16942. https://doi.org/10.1016/j.ijhydene.2012.08.064
Zhao, Y., Watanabe, K., & Hashimoto, K. (2012). Self-supporting oxygen reduction electrocatalysts made from a nitrogen-rich network polymer. Journal of the American Chemical Society, 134, 19528–19531. https://doi.org/10.1021/ja3085934
Zhou, R., Zheng, Y., Jaroniec, M., & Qiao, S.-Z. (2016). Determination of the electron transfer number for the oxygen reduction reaction: From theory to experiment. ACS Catalysis, 6, 4720–4728. https://doi.org/10.1021/acscatal.6b01581
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Savla, N., Khilari, S., Pandit, S., Jung, S.P. (2020). Effective Cathode Catalysts for Oxygen Reduction Reactions in Microbial Fuel Cell. In: Kumar, P., Kuppam, C. (eds) Bioelectrochemical Systems. Springer, Singapore. https://doi.org/10.1007/978-981-15-6872-5_9
Download citation
DOI: https://doi.org/10.1007/978-981-15-6872-5_9
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-6871-8
Online ISBN: 978-981-15-6872-5
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)