Abstract
Printed circuit board (PCB) is an essential part present in electronic waste (e-waste). Rich metallic content including base, precious, and toxic metals makes PCB a secondary metal reservoir. Recycling of PCB is necessary to conserve natural resources and to protect the environment. Bioleaching process is preferred over the conventional metallurgical techniques for metal recycling from e-waste due to its better efficiency and environmental compatibility. Metal bioleaching from e-waste employing heterotrophic microorganisms like fungi is the comparatively less explored area. In this context, bioleaching of selected metals such as Cu, Ni, and Zn from e-waste in the form of desktop PCB using pure and mixed cultures of Aspergillus species was attempted. Aspergillus niger was chosen for its organic acid production ability to presumably help in bioleaching of metals. As the metals are usually embedded in the polymer matrix in the PCB, Aspergillus tubingensis was selected for its polymer-degrading ability. The bioleaching experiments were performed using pulverized waste PCB (WPCB) in the particle size range of 0.038–1 mm for a period of 33 days at 1 g/L of pulp density. Results showed that the pure culture of Aspergillus niger was able to leach a maximum of 71% Cu, 32% Ni, and 79% Zn. Similarly, the corresponding maximum metal leaching efficiency employing a pure culture of Aspergillus tubingensis was 54% Cu, 41% Zn, and 14% Ni. Using mixed cultures of Aspergillus species, there was a marginal increase in metal bioleaching for Cu and Ni with extraction efficiency of 76 and 36%, respectively. Extraction efficiency of 63% for Zn was observed using the mixed culture. Results indicated the practical feasibility of fungal bioleaching using pure and mixed cultures of Aspergillus species for metal recycling from e-waste for prospective beneficiation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Amiri F, Mousavi SM, Yaghmaei S (2011) Enhancement of bioleaching of a spent Ni/Mo hydroprocessing catalyst by Penicillium simplicissimum. Sep Purif Technol 80(3):566–576
Aung KMM, Ting YP (2005) Bioleaching of spent fluid catalytic cracking catalyst using Aspergillus niger. J Biotechnol 116(2):159–170
Awasthi AK, Zlamparet GI, Zeng X, Li J (2017) Evaluating waste printed circuit boards recycling opportunities and challenges, a mini review. Waste Manag Res 35(4):346–356
Baldé CP, Forti V, Gray V, Kuehr R, Stegmann P (2017) The global e-waste monitor 2017: quantities, flows and resources. United Nations University, International Telecommunication Union, International Solid Waste Association
Beolchini F, Fonti V, Dell’Anno A, Rocchetti L, Vegliò F (2012) Assessment of biotechnological strategies for the valorization of metal bearing wastes. Waste Manag 32(5):949–956
Brandl H, Bosshard R, Wegmann M (2001) Computer-munching microbes: metal leaching from electronic scrap by bacteria and fungi. Hydrometallurgy 59(2–3):319–326
Cui J, Zhang L (2008) Metallurgical recovery of metals from electronic waste: a review. J Hazard Mater 158(2–3):228–256
Das A, Vidyadhar A, Mehrotra SP (2009) A novel flowsheet for the recovery of metal values from waste printed circuit boards. Resour Conserv Recycl 53(8):464–469
Faraji F, Golmohammadzadeh R, Rashchi F, Alimardani N (2018) Fungal bioleaching of WPCBs using Aspergillus niger: observation, optimization and kinetics. J Environ Manage 217:775–787
Horeh NB, Mousavi SM, Shojaosadati SA (2016) Bioleaching of valuable metals from spent lithium-ion mobile phone batteries using Aspergillus niger. J Power Sources 320:257–266
Iannicelli-Zubiani EM, Giani MI, Recanati F, Dotelli G, Puricelli S, Cristiani C (2017) Environmental impacts of a hydrometallurgical process for electronic waste treatment: a life cycle assessment case study. J Clean Prod 140:1204–1216
Ilyas S, Ruan C, Bhatti HN, Ghauri MA, Anwar MA (2010) Column bioleaching of metals from electronic scrap. Hydrometallurgy 101(3–4):135–140
Ilyas S, Chi RA, Lee JC (2013) Fungal bioleaching of metals from mine tailing. Miner Process Extr Met Rev 34(3):185–194
Jadhav U, Hocheng H (2015) Hydrometallurgical recovery of metals from large printed circuit board pieces. Sci Rep 5:14574
Kim MJ, Seo JY, Choi YS, Kim GH (2016) Bioleaching of spent Zn–Mn or Ni–Cd batteries by Aspergillus species. Waste Manag 51:168–173
Kolenčík M, Urík M, Čerňanský S, Molnárová M, Matúš P (2013) Leaching of zinc, cadmium, lead and copper from electronic scrap using organic acids and the Aspergillus niger strain. Fresenius Environ Bull 22(12a):3673–3679
Li J, Shrivastava P, Gao Z, Zhang HC (2004) Printed circuit board recycling: a state-of-the-art survey. IEEE Trans Electron Packag Manuf 27(1):33–42
Lundgren DG, Valcova-Valchanova M, Reed R (1986) Chemical reactions important in bioleaching and bioaccumulations. In: Ehrlich HL, Holmes DS (eds) Biotechnology for the mining, metal-refining, and fossil fuel processing industries. John Wiley & Sons, New York, pp 7–22
Magnuson JK, Lasure LL (2004) Organic acid production by filamentous fungi. Advances in fungal biotechnology for industry, agriculture, and medicine. Springer, Boston, MA, pp 307–340
Murugan RV, Bharat S, Deshpande AP, Varughese S, Haridoss P (2008) Milling and separation of the multi-component printed circuit board materials and the analysis of elutriation based on a single particle model. Powder Technol 183:169–176
Niu X, Li Y (2007) Treatment of waste printed wire boards in electronic waste for safe disposal. J Hazard Mater 145(3):410–416
Pant D, Joshi D, Upreti MK, Kotnala RK (2012) Chemical and biological extraction of metals present in E waste: a hybrid technology. Waste Manag 32(5):979–990
Priya A, Hait S (2017a) Qualitative and quantitative metals liberation assessment for characterization of various waste printed circuit boards for recycling. Environ Sci Pollut Res 24(35):27445–27456
Priya A, Hait S (2017b) Comparative assessment of metallurgical recovery of metals from electronic waste with special emphasis on bioleaching. Environ Sci Pollut Res 24(8):6989–7008
Priya A, Hait S (2018) Extraction of metals from high grade waste printed circuit board by conventional and hybrid bioleaching using Acidithiobacillus ferrooxidans. Hydrometallurgy 177:132–139
Santhiya D, Ting YP (2005) Bioleaching of spent refinery processing catalyst using Aspergillus niger with high-yield oxalic acid. J Biotechnol 116(2):171–184
Sauer M, Porro D, Mattanovich D, Branduardi P (2008) Microbial production of organic acids: expanding the markets. Trends Microbiol 26(2):100–108
Schinner F, Burgstaller W (1989) Extraction of zinc from industrial waste by a Penicillium sp. Appl Environ Microbiol 55(5):1153–1156
Singleton I (2001) Fungal remediation of soils contaminated with persistent organic. Fungi in bioremediation 23:79
USEPA (1995) Microwave assisted acid digestion of siliceous and organically based matrices USEPA method 3052, 3rd edn. United States Environmental Protection Agency, Washington, DC
Wu HY, Ting YP (2006) Metal extraction from municipal solid waste (MSW) incinerator fly ash—chemical leaching and fungal bioleaching. Enzyme Microb Technol 38(6):839–847
Xia M, Bao P, Liu A, Wang M, Shen L, Yu R, Qiu G (2018) Bioleaching of low-grade waste printed circuit boards by mixed fungal culture and its community structure analysis. Resour Conserv Recycl 136:267–275
Zhou Y, Qiu K (2010) A new technology for recycling materials from waste printed circuit boards. J Hazard Mater 175(1–3):823–828
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Trivedi, A., Hait, S. (2020). Bioleaching of Selected Metals from E-Waste Using Pure and Mixed Cultures of Aspergillus Species. In: Gupta, T., Singh, S., Rajput, P., Agarwal, A. (eds) Measurement, Analysis and Remediation of Environmental Pollutants. Energy, Environment, and Sustainability. Springer, Singapore. https://doi.org/10.1007/978-981-15-0540-9_13
Download citation
DOI: https://doi.org/10.1007/978-981-15-0540-9_13
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-0539-3
Online ISBN: 978-981-15-0540-9
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)