Abstract
Waste electrical and electronic equipment (WEEE) or electronic waste (e-waste) is one of the fastest growing waste streams in the urban environment worldwide. The core component of printed circuit board (PCB) in e-waste contains a complex array of metals in rich quantity, some of which are toxic to the environment and all of which are valuable resources. Therefore, the recycling of e-waste is an important aspect not only from the point of waste treatment but also from the recovery of metals for economic growth. Conventional approaches for recovery of metals from e-waste, viz. pyrometallurgical and hydrometallurgical techniques, are rapid and efficient, but cause secondary pollution and economically unviable. Limitations of the conventional techniques have led to a shift towards biometallurgical technique involving microbiological leaching of metals from e-waste in eco-friendly manner. However, optimization of certain biotic and abiotic factors such as microbial species, pH, temperature, nutrients, and aeration rate affect the bioleaching process and can lead to profitable recovery of metals from e-waste. The present review provides a comprehensive assessment on the metallurgical techniques for recovery of metals from e-waste with special emphasis on bioleaching process and the associated factors.
Similar content being viewed by others
References
Adhapure NN, Dhakephalkar PK, Dhakephalkar AP, Tembhurkar VR, Rajgure AV, Deshmukh AM (2014) Use of large pieces of printed circuit boards for bioleaching to avoid ‘precipitate contamination problem’ and to simplify overall metal recovery. MethodsX 1:181–186
Akcil A, Yazici EY, Deveci H (2009) E-wastes: mines of future. Waste management Recycling and Environmental Technologies Magazine 10:65–73
Akcil A, Deveci H, Jain S, Khan A (2010) Mineral biotechnology of sulphides. In: Rai MK (ed) Geomicrobiology. Science Publishers, Enfield, pp 101–137
Anders BJ, Colin W (1995) Ferric sulphate oxidation using Thiobacillus ferrooxidans: a review. Process Biochem 30:225–236
APME (2000) Plastics: insight into consumption and recovery in Western Europe. Association of Plastics Manufacturers in Europe (APME), Brussels
Arshadi M, Mousavi SM (2015) Multi-objective optimization of heavy metals bioleaching from discarded mobile phone PCBs: simultaneous Cu and Ni recovery using Acidithiobacillus ferrooxidans. Sep Purif Technol 147:210–219
Atlas RM, Bartha R (1997) Microbial ecology: fundamentals and applications. Benjamin Cummings, USA
Aung KMM, Ting YP (2005) Bioleaching of spent fluid catalytic cracking catalysts using Asperlligus niger. J Biotechnol 116:159–170
Ayres RU (1997) Metal recycling: economic and environmental implications. Resour Conserv Recy 21:145–173
Barontini F, Cozzani V (2006) Formation of hydrogen bromide and organobrominated compounds in the thermal degradation of electronic boards. J Anal Appl Pyrolysis 77:41–55
Beolchini F, Fonti V, Dell’Anno A, Rocchetti L, Veglio F (2012) Assessment of biotechnological strategies for the valorization of metal bearing wastes. Waste Manag 32:949–956
Bosecker K (1997) Bioleaching: metal solubilisation by microorganisms. FEMS Microbiol Revi 20:591–604
Brandl H, Bosshard R, Wegmann M (2001) Computer-munching microbes: metal leaching from electronic scrap by bacteria and fungi. Hydrometallurgy 59:319–326
Brandl H, Lehmann S, Faramarzi MA, Martinelli D (2008) Biomobilization of silver, gold, and platinum from solid waste materials by HCN-forming microorganisms. Hydrometallurgy 94:14–17
Brierley JA, Brierley CL (2001) Present and future commercial applications of biohyudrometallurgy. Hydrometallurgy 59:233–239
Bryan CG, Watkina EL, McCreddena TJ, Wong ZR, Harrison STL, Kaksonen AH (2015) The use of pyrite as a source of lixiviant in the bioleaching of electronic waste. Hydrometallurgy 152:33–43
Burgstaller W, Schinner F (1993) Leaching of metals with fungi. J Biotechnol 27:91–116
Castro IM, Fietto JLR, Vieira RX, Tropia MJM, Campos LMM, Paniago EB, Brandao RL (2000) Bioleaching of zinc and nickel from silicate using Aspergillus niger culture. Hydrometallurgy 57:39–49
Chatterjee S (2012) Sustainable electronic waste management and recycling process. Am J Environ Eng 2(1):23–33
Chen A, Dietrich KN, Huo X, Ho SM (2011) Developmental neurotoxicants in e-waste: an emerging health concern. Environ Health Persp 119(4):431–433
Chiang H-L, Lin K-H (2014) Exhaust constituent emission factors of printed circuit board pyrolysis processes and its exhaust control. J Hazard Mater 264:545–551
Chien Y-C, Liang C-P, Shih P-H (2009) Emission of polycyclic aromatic hydrocarbons from the pyrolysis of liquid crystal wastes. J Hazard Mater 170:910–914
Chmielewski AG, Urbanski TS, Migdal W (1997) Separation technologies for metals recovery from industrial wastes. Hydrometallurgy 45(3):333–344
Choi MS, Cho KS, Kim DS, Kim DJ (2004) Microbial recovery of copper from printed circuit boards of waste computer by Acidithiobacillus ferrooxidans. J Environ Sci Health A A 39(11–12):2973–2982
Choubey PK, Panda R, Jha MK, Lee J-c, Pathak DD (2015) Recovery of copper and recycling of acid from the leach liquor of discarded printed circuit boards (PCBs). Sep Purif Technol 156:269–275
CMCA (2006) Electronic waste recovery study. CM Consulting Associates (CMCA) 3–32
Colmer AR, Hinkle ME (1947) The role of microorganisms in acid mine drainage: a preliminary report. Science 106:253–256
Cui J, Forssberg E (2003) Mechanical recycling of waste electric and electronic equipment: a review. J Hazard Mater 99(3):243–263
Cui J, Zhang L (2008) Metallurgical recovery of metals from electronic waste: a review. J Hazard Mater 158:228–256
Dalrymple I, Wright N, Kellner R (2007) An integrated approach to electronic waste (WEEE) recycling. Circuit World 33:52–58
Das A, Vidyadhar A, Mehrotra SP (2009) A novel flowsheet for the recovery of metal values from waste printed circuit boards. Resour Conserv Recy 53:464–469
Deng WJ, Zheng JS, Bi XH, Fu JM, Wong MH (2007) Distribution of PBDEs in air particles from an electronic waste recycling site compared with Guangzhou and Hong Kong, South China. Environ Int 33:1063–1069
Dunn J, Wendell E, Carda DD et al. (1991) Chlorination process for recovering gold values from gold alloys. US Patent, US5004500
Ebert J, Bahadir M (2003) Formation of PBDD/F from flame-retarded plastic materials under thermal stress. Environ Int 29:711–716
Fan RY, Xie F, Guan XL, Zhang QL, Luo ZR (2014) Selective adsorption and recovery of Au(III) from three kinds of acidic systems by persimmon residual based bio-sorbent: a method for gold recycling from e-wastes. Bioresour Technol 163:167–171
Faramarzi MA, Stagars M, Pensini E (2004) Metal solubilization from metal-containing solid materials by cyanogenic Chromobacterium violaceum. J Biotechnol 113(3):321–326
Fujimori T, Takigami H (2014) Pollution distribution of heavy metals in surface soil at an informal electronic-waste recycling site. Environ Geochem Health 36:159–168
Gadd GM (2004) Microbial influence on metal mobility and application for bioremediation. Geoderma 122:109–119
Gehrke T, Telegdi J, Thierry D, Sand W (1998) Importance of extracellular polymeric substances from Thiobacillus ferrooxidans for bioleaching. Appl Environ Microbiol 64(7):2743–2747
Grossman E (2006) High tech trash: digital devices, hidden toxics, and human health. Island Press, Washington, DC, pp 336–352
Guo J, Guo J, Xu Z (2009) Recycling of non-metallic fractions from waste printed circuit boards: a review. J Hazard Mater 168:567–590
Ha VH, Lee J, Huynh TH, Jeong J, Pandey BD (2014) Optimizing the thiosulfate leaching of gold fromprinted circuit boards of discarded mobile phone. Hydrometallurgy 149:118–126
Hadi P, Xu M, Lin CSK, Hui C-W, McKaya G (2015) Waste printed circuit board recycling techniques and product utilization. J Hazard Mater 283:234–243
Hageluken C (2006) Recycling of electronic scrap at umicore’s integrated metals smelter and refinery. World of Metallurgy – ERZMETALL 59(3):152–161
Haxel GB, Hedrick JB, Orris GJ (2002) Rare earth elements—critical resources for high technology. US Geological Survey, Reston, VA
He WZ, Li GM, Ma XF, Wang H, Huang JW, Xu M, Huang CJ (2006) WEEE recovery strategies and the WEEE treatment status in China. J Hazard Mater 136:502–512
Hicks C, Dietmar R, Eugster M (2005) The recycling and disposal of electrical and electronic waste in China – legislative and market responses. Environ Impact Assess Rev 25:459–471
Hoffmann JE (1992) Recovering precious metals from electronic scrap. J Min Met Mat S 44:43–48
Hong Y, Valix M (2014) Bioleaching of electronic waste using acidophilic sulfur oxidising bacteria. J Clean Prod 65:465–472
Huang K, Jie Guo J, Xu Z (2009) Recycling of waste printed circuit boards: a review of current technologies and treatment status in China. J Hazard Mater 164:399–408
Iji M, Yokoyama S (1997) Recycling of printed wiring boards with mounted electronic components. Circuit World 23:10–15
Ilyas S, Anwar MA, Niazi SB, Afzal GM (2007) Bioleaching of metals from electronic scrap by moderately thermophilic acidophilic bacteria. Hydrometallurgy 88:180–188
Ilyas S, Ruan C, Bhatti HN, Ghauri MA, Anwar MA (2010) Column bioleaching of metals from electronic scrap. Hydrometallurgy 101:135–140
Ilyas S, Lee J-c, R-a C (2013) Bioleaching of metals from electronic scrap and its potential for commercial exploitation. Hydrometallurgy 131-132:138–143
Isildar A, van de Vossenberg J, Rene ER, van Hullebusch ED, Lens PNL (2016) Two-step bioleaching of copper and gold from discarded printed circuit boards (PCB). Waste Manag 57:149–157
Ivanus RC (2010) Bioleaching of metals from electronic scrap by pure and mixed culture of Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans. Metal Int 15:62–70
Ivanus RC, Ivanus D (2009) Metal leaching from electronic scrap by fungi. Metal Int 14:58–65
Jadhav U, Hocheng H (2014) Use of Aspergillus niger 34770 culture supernatant for tin metal removal. Corros Sci 82:248–254
Jha MK, Choubey PK, Jha AK, Kumari A, Lee J-c, Kumar V, Jeong J (2012) Leaching studies for tin recovery from waste e-scrap. Waste Manag 32:1919–1925
Jomova K, Jenisova Z, Feszterova M, Baros S, Liska J, Hudecova D, Rhodes CJ, Valko M (2011) Arsenic: toxicity, oxidative stress and human disease. J Appl Toxicol 31(2):95–107
Jujun R, Xingjiong Z, Yiming Q, Jian H (2014) A new strain for recovering precious metals from waste printed circuit boards. Waste Manag 34:901–907
Kahhat R, Williams E (2009) Product or waste? Importation and end-of-life processing of computers in Peru. Environ Sci Technol 43:6010–6016
Karavaiko GI, Rossi G, Agate AD, Groudev SN, Avakyan ZA (1988) Biogeotechnology of metals - a manual. Centre for International Projects, Moscow
Karwowska E, Andrzejewska-Morzuch D, Lebkowska M, Tabernacka A, Wojtkowska M, Telepko A, Konarzewska A (2014) Bioleaching of metals from printed circuit boards supported with surfactant-producing bacteria. J Hazard Mater 264:203–210
Krebs W, Brombacher C, Bosshard PP, Bachofen R, Brandl H (1997) Microbial recovery of metals from solids. FEMS Microbiol Rev 20:605–617
Krikke J (2008) Recycling e-waste: the sky is the limit. IT Professional 10(1):50–55
Le L, Tang J, Ryan D, Valix M (2006) Bioleaching nickel laterite ores using multi metal tolerant Aspergillus foetidus organism. Miner Eng 19:1259–1265
Lee J-c, Song HT, Yoo J-M (2007) Present status of the recycling of waste electrical and electronic equipment in Korea. Resour Conserv Recy 50:380–397
Li J, Shrivastava P, Gao Z, Zhang H-C (2004) Printed circuit board recycling: a state-of-the-art survey. IEEE Trans Electron Packag Manuf 27(1):33–42
Li J, Lu H, Guo J, Xu Z, Zhou Y (2007) Recycle technology for recovering resources and products from waste printed circuit boards. Environ Sci Technol 41:1995–2000
Liang G, Tang J, Liu W, Zhou Q (2013) Optimizing mixed culture of two acidophiles to improve copper recovery from printed circuit boards (PCBs). J Hazard Mater 250–251:238–245
Lim SR, Schoenung JM (2010) Human health and ecological toxicity potentials due to metal content in waste electronic devices with flat panel displays. J Hazard Mater 177:251–259
Lin C, Wu M, Yang C, Ger J, Tsai W, Deng J (2009) Acute severe chromium poisoning after dermal exposure to hexavalent chromium. J Chin Med Assoc 72(4):219–221
Lu R, Ma E, Xu Z (2012) Application of pyrolysis process to remove and recover liquid crystal and films from waste liquid crystal display glass. J Hazard Mater 243:311–318
Madrigal-Arias JE, Argumedo-Delira R, Alarcón A, Mendoza-López MR, García-Barradas O, Cruz-Sánchez JS, Ferrera-Cerrato R, Jiménez-Fernández M (2015) Bioleaching of gold, copper and nickel from waste cellular phone PCBs and computer goldfinger motherboards by two Aspergillus niger strains. Braz J Microbiol 46(3):707–713
Mishra D, Rhee YH (2014) Microbial leaching of metals from solid industrial wastes. J Microbiol 52(1):1–7
Morin D, Lips A, Pinches T (2006) BioMine – integrated project for the development of biotechnology for metal-bearing materials in Europe. Hydrometallurgy 83(4):69–76
Mrazikova A, Marcincakova R, Kadukova J, Velgosova O, Balintova M (2015) Influence of used bacterial culture on zinc and aluminium bioleaching from printed circuit boards. Nova Biotechnologica et Chimica 14(1):45–51
Nakajima K, Takeda O, Miki T, Matsubae K, Nakamura S, Nagasaka T (2010) Thermodynamic analysis of contamination by alloying elements in aluminium recycling. Environ Sci Technol 44:5594–5600
Natarajan KA, Deo N (2001) Role of bacterial interaction and bioreagents in iron ore flotation. Int J Miner Process 62:143–157
Ni M, Xiao H, Chi Y, Yan J, Buekens A, Jin Y, Lu S (2012) Combustion and inorganic bromine emission of waste printed circuit boards in a high temperature furnace. Waste Manag 32:568–574
Norgate TE, Jahanshahi S, Rankin WJ (2007) Assessing the environmental impact of metal production processes. J Clean Prod 15(8):838–848
Olson GJ, Brierley JA, Brierley CL (2003) Progress in bioleaching: applications of microbial processes by the minerals industries. Appl Microbiol Biotechnol 63(3):249–257
Owens CV, Lambright C, Bobseine K (2007) Identification of estrogenic compounds emitted from the combustion of computer printed circuit boards in electronic waste. Environ Sci Technol 41:8506–8511
Padiyar N (2011) Nickel allergy-is it a cause of concern in everyday dental practice. Int J Contemp Dent 12(1):80–81
Pant D, Joshi D, Upreti MK, Kotnala RK (2012) Chemical and biological extraction of metals present in e-waste: a hybrid technology. Waste Manag 32:979–990
Plum LA, Rink L, Haase H (2010) The essential toxin: impact of zinc on human health. Int J Environ Res Public Health 7:1342–1365
Rath SS, Nayak P, Mukherjee PS, Chaudhury GR, Mishra BK (2012) Treatment of electronic waste to recover metal values using thermal plasma coupled with acid leaching- a response surface modelling approach. Waste Manag 32:575–583
Rawlings DE (2002) Metal mining using microbes. Ann Rev Microbiol 56:65–91
Reck BK, Graedel TE (2012) Challenges in metal recycling. Science 337:690–695
Robinson BH (2009) E-waste: an assessment of global production and environmental impacts. Sci Total Environ 408:183–191
Rochat D, Hageluken C, Keller M, Widmwe R (2007) Optimal recycling of printed wiring boards in India. Conference paper http://www.n.ethz.ch/%7Eschmia/download/cited_papers/optimal_recycling_for_PWBs.pdf. Accessed 15 July 2015
Saidan M, Brown B, Valix M (2012) Leaching of electronic waste using Biometabolised acids. Chin J Chem Eng 20(3):530–534
Sand W, Gehrke T, Jozsa PG, Schippers A (2001) (bio)chemistry of bacterial leaching—direct vs. indirect bioleaching. Hydrometallurgy 59:159–175
Scharnhorst W, Jolliet O, Hilty LM (2005) The end of life treatment of second generation mobile phone networks: strategies to reduce the environmental impact. Environ Impact Assess Rev 25:540–566
Shi S, Fang Z (2005) Bioleaching of marmatite flotation concentrates by adapted mixed mesoacidophilic cultures in an airlift reactor. Int J Miner Process 76:3–12
Silvas FPC, Correa MMJ, Caldas MPK, de Moraes VT, Espinosa DCR, Tenório JAS (2015) Printed circuit board recycling: physical processing and copper extraction by selective leaching. Waste Manag 46:503–510
Sum EYL (2005) The recovery of metals from electronic scrap. J Min Met Mat S 43:53–61
Tasaki T, Takasuga T, Sako M, Sakai S (2004) Substance flow analysis of brominated flame retardants and related compounds in waste TV sets in Japan. Waste Manag 24:571–580
Terakado O, Ohhashi R, Hirasawa M (2013) Bromine fixation by metal oxide in pyrolysis of printed circuit board containing brominated flame retardant. J Anal Appl Pyrolysis 103:216–221
Tsydenova O, Bengtsson M (2011) Chemical hazards associated with treatment of waste electrical and electronic equipment. Waste Manag 31(1):45–58
Tuncuk A, Akcil A, Yazici EY, Devici H (2012) Aqueous metal recovery techniques from e scrape: hydrometallurgy in recycling. Miner Eng 25:28–37
UNEP (2009) Recycling – from E-waste to resources. United Nations Environmental Programme (UNEP), Paris
UNU (2015) E-waste World Map: Update to quantitative data and legal texts – STEP. United Nations University (UNU). http://step-initiative.org/index.php/newsdetails/items/e-waste-world-map/. Accessed 11 Nov 2016
Valix M, Tang JY, Malik R (2001) Metal tolerance of fungi. Miner Eng 14(5):499–505
Veldbuizen H, Sippel B (1994) Mining discarded electronics. Ind Environ 17(3):7–14
Wang J, Bai J, Xu J, Liang B (2009) Bioleaching of metals from printed wire boards by Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans and their mixture. J Hazard Mater 172:1100–1105
Wang X, Lu X, Zhang S (2013) Study on the-waste liquid crystal display treatment: focus on the resource recovery. J Hazard Mater 244–245:342–347
Widmer R, Oswald-Krapf H, Sinha-Khetriwal D, Schnellmann M, Boni H (2005) Global perspectives on E-waste. Environ Impact Asses Rev 25:436–458
Wilner J, Fornalczyk A (2013) Extraction of metals from electronic waste by bacterial leaching. Environ Prot Eng 39(1):197–208
World Bank (2015) http://data.worldbank.org/indicator/NY.GDP.PCAP.PP.CD?end=2014&start=1990. Accessed 18 November 2016
Xiang Y, Wu P, Zhu N, Zhang T, Liu W, Wu J, Li P (2010) Bioleaching of copper from waste printed circuit boards by bacterial consortium enriched from acid mine drainage. J Hazard Mater 184:812–818
Xie F, Cai T, Ma Y, Li H, Li C, Huang Z, Yuan G (2009) Recovery of Cu and Fe from printed circuit board waste sludge by ultrasound: evaluation of industrial application. J Clean Prod 17:1494–1498
Xin B, Zhang X, Xia Y, Wu F, Chen S, Li L (2009) Bioleaching mechanism of Co and Li from spent lithium-ion battery by the mixed culture of acidophilic sulfur-oxidizing and iron-oxidising bacteria. Bioresour Technol 100:6163–6169
Yamane LH, Moraes VT, Espinosa DCR, Tenorio JAS (2011) Recycling of WEEE: characterization of spent printed circuit boards from mobile phones and computers. E-waste Manag 31:2553–2558
Yang T, Xu Z, Wen JK, Yang LM (2009) Factors influencing bioleaching copper from waste printed circuit boards by Acidithiobacillus ferrooxidans. Hydrometallurgy 97:29–32
Yang H, Liu J, Yang J (2011) Leaching copper from shredded particles of waste printed circuit boards. Journal of Hazard Mater 187:393–400
Yang Y, Chen S, Li S, Chen M, Chen H, Liu B (2014) Bioleaching waste printed circuit boards by Acidithiobacillus ferrooxidans and its kinetics aspect. J Biotechnol 173:24–30
Yazici EY, Deveci H (2009) Recovery of metals from e-waste. Madencilik 48(3):3–18
Yuan CY, Zhang HC, McKenna G, Korzeniewski C, Li J (2007) Experimental studies on cryogenic recycling of printed circuit board. Int J Adv Manuf Tech 34:657–666
Zhan L, Xu ZM (2008) Application of vacuum metallurgy to separate pure metal from mixed metallic particles of crushed waste printed circuit board scraps. Environ Sci Technol 42:7676–7681
Zhang S, Forssberg E (1997) Mechanical separation oriented characterization of electronic scrap. Resour Conserv Recy 21(4):247–269
Zhao G, Zhou H, Wang D, Zha J, Xu Y, Rao K et al (2009) PBBs, PBDEs, and PCBs in foods collected from e-waste disassembly sites and daily intake by local residents. Sci Total Environ 407:2565–2575
Zhou Y, Qiu K (2010) A new technology for recycling materials from waste printed circuit boards. J Hazard Mater 175:823–828
Zhou HB, Zeng WM, Yang ZF, Xie YJ, Qiu GZ (2009) Bioleaching of chalcopyrite concentrate by a moderately thermophilic culture in a stirred tank reactor. Bioresour Technol 100:515–520
Zhu N, Xiang Y, Zhang T, Wu P, Danga Z, Li P, Wu J (2011) Bioleaching of metal concentrates of waste printed circuit boards by mixed culture of acidophilic bacteria. J Hazard Mater 192:614–619
Acknowledgement
Fellowship grant to Ms. Anshupriya from Department of Science and Technology, Government of India is sincerely acknowledged.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Responsible editor: Philippe Garrigues.
Rights and permissions
About this article
Cite this article
Priya, A., Hait, S. Comparative assessment of metallurgical recovery of metals from electronic waste with special emphasis on bioleaching. Environ Sci Pollut Res 24, 6989–7008 (2017). https://doi.org/10.1007/s11356-016-8313-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-016-8313-6