Abstract
Paper-based microfluidics has been extensively used in recent times to perform automated multi-step reactions. One of the requirements to carry out sequential reactions is the ability to control the fluid flow accurately on paper substrates, comparable to what is achieved in conventional microfluidic devices. Flow control still remains a major roadblock in the translation of more complex paperfluidic devices from research labs into the commercial domain. In this chapter, we describe the advantages and limitations of the reported flow control strategies in paperfluidics. Modelling the flow on paper and its implication on the device design are also discussed. Finally, we summarize the challenges for commercialization of these flow-switching devices.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Akyazi T, Basabe-Desmonts L, Benito-Lopez F (2018) Review on microfluidic paper-based analytical devices towards commercialisation. Anal Chim Acta 1001:1–17. https://doi.org/10.1016/j.aca.2017.11.010
Apilux A, Ukita Y, Chikae M, Chailapakul O, Takamura Y (2013) Development of automated paper-based devices for sequential multistep sandwich enzyme-linked immunosorbent assays using inkjet printing. Lab Chip 13(1):126–135. https://doi.org/10.1039/C2LC40690J
Böhm A, Carstens F, Trieb C, Schabel S, Biesalski M (2014) Engineering microfluidic papers: effect of fiber source and paper sheet properties on capillary-driven fluid flow. Microfluid Nanofluid 16(5):789–799. https://doi.org/10.1007/s10404-013-1324-4
Buser JR, Byrnes SA, Anderson CE, Howell AJ, Kauffman PC, Bishop JD, Wheeler MH, Kumar S, Yager P (2019) Understanding partial saturation in paper microfluidics enables alternative device architectures. Anal Methods 11(3):336–345. https://doi.org/10.1039/C8AY01977K
Byrnes S, Thiessen G, Fu E (2013) Progress in the development of paper-based diagnostics for low-resource point-of-care settings. Bioanalysis 5(22):2821–2836. https://doi.org/10.4155/bio.13.243
Chen C, Zhao L, Zhang H, Shen X, Zhu Y, Chen H (2019) Novel wax valves to improve distance-based analyte detection in paper microfluidics. Anal Chem 91:5169–5175. https://doi.org/10.1021/acs.analchem.8b05764
Chen H, Cogswell J, Anagnostopoulos C, Faghri M (2012) A fluidic diode, valves, and a sequential-loading circuit fabricated on layered paper. Lab Chip 12(16):2909–2913. https://doi.org/10.1039/C2LC20970E
da Silva ET, Santhiago M, de Souza FR, Coltro WK, Kubota LT (2015) Triboelectric effect as a new strategy for sealing and controlling the flow in paper-based devices. Lab Chip 15(7):1651–1655. https://doi.org/10.1039/C5LC00022J
Dharmaraja S, Lafleur L, Byrnes S, Kauffman P, Buser J, Toley B, Fu E, Yager P, Lutz B (2013) Programming paper networks for point of care diagnostics. In: Microfluidics, BioMEMS, and medical microsystems XI, vol 8615, p 86150X. International Society for Optics and Photonics. https://doi.org/10.1117/12.2006138
Fratzl M, Chang BS, Oyola-Reynoso S, Blaire G, Delshadi S, Devillers T, Ward T III, Dempsey NM, Bloch JF, Thuo MM (2018) Magnetic two-way valves for paper-based capillary-driven microfluidic devices. ACS Omega 3(2):2049–2057. https://doi.org/10.1021/acsomega.7b01839
Fu E, Lutz B, Kauffman P, Yager P (2010a) Controlled reagent transport in disposable 2D paper networks. Lab Chip 10(7):918–920. https://doi.org/10.1039/B919614E
Fu E, Kauffman P, Lutz B, Yager P (2010b) Chemical signal amplification in two-dimensional paper networks. Sens Actuators, B Chem 149(1):325–328. https://doi.org/10.1016/j.snb.2010.06.024
Fu E, Ramsey SA, Kauffman P, Lutz B, Yager P (2011) Transport in two-dimensional paper networks. Microfluid Nanofluid 10(1):29–35. https://doi.org/10.1007/s10404-010-0643-y
Fu E, Downs C (2017) Progress in the development and integration of fluid flow control tools in paper microfluidics. Lab Chip 17(4):614–628. https://doi.org/10.1039/C6LC01451H
Gerbers R, Foellscher W, Chen H, Anagnostopoulos C, Faghri M (2014) A new paper-based platform technology for point-of-care diagnostics. Lab Chip 14(20):4042–4049. https://doi.org/10.1039/C4LC00786G
Giokas DL, Tsogas GZ, Vlessidis AG (2014) Programming fluid transport in paper-based microfluidic devices using razor-crafted open channels. Anal Chem 86(13):6202–6207. https://doi.org/10.1021/ac501273v
Glavan AC, Martinez RV, Maxwell EJ, Subramaniam AB, Nunes RM, Soh S, Whitesides GM (2013) Rapid fabrication of pressure-driven open-channel microfluidic devices in omniphobic RF paper. Lab Chip 13(15):2922–2930. https://doi.org/10.1039/C3LC50371B
Houghtaling J, Liang T, Thiessen G, Fu E (2013) Dissolvable bridges for manipulating fluid volumes in paper networks. Anal Chem 85(23):11201–11204. https://doi.org/10.1021/ac4022677
Jahanshahi-Anbuhi S, Chavan P, Sicard C, Leung V, Hossain SZ, Pelton R, Brennan JD, Filipe CD (2012) Creating fast flow channels in paper fluidic devices to control timing of sequential reactions. Lab Chip 12(23):5079–5085. https://doi.org/10.1039/C2LC41005B
Jahanshahi-Anbuhi S, Henry A, Leung V, Sicard C, Pennings K, Pelton R, Brennan JD, Filipe CD (2014) based microfluidics with an erodible polymeric bridge giving controlled release and timed flow shutoff. Lab Chip 14(1):229–236. https://doi.org/10.1039/C3LC50762A
Jang I, Song S (2015) Facile and precise flow control for a paper-based microfluidic device through varying paper permeability. Lab Chip 15(16):3405–3412. https://doi.org/10.1039/C5LC00465A
Kim TH, Hahn YK, Lee J, Van Noort D, Kim MS (2018) Solenoid driven pressure valve system: toward versatile fluidic control in paper microfluidics. Anal Chem 90(4):2534–2541. https://doi.org/10.1021/acs.analchem.7b03791
Kong T, Flanigan S, Weinstein M, Kalwa U, Legner C, Pandey S (2017) A fast, reconfigurable flow switch for paper microfluidics based on selective wetting of folded paper actuator strips. Lab Chip 17(21):3621–3633. https://doi.org/10.1039/C7LC00620A
Kumar AA, Hennek JW, Smith BS, Kumar S, Beattie P, Jain S, Rolland JP, Stossel TP, Chunda-Liyoka C, Whitesides GM (2015) From the bench to the field in low-cost diagnostics: two case studies. Angew Chem Int Ed 54(20):5836–5853. https://doi.org/10.1002/anie.201411741
Li X, Zwanenburg P, Liu X (2013) Magnetic timing valves for fluid control in paper-based microfluidics. Lab Chip 13(13):2609–2614. https://doi.org/10.1039/C3LC00006K
Li X, Ballerini DR, Shen W (2012) A perspective on paper-based microfluidics: Current status and future trends. Biomicrofluidics 6(1):12–14. https://doi.org/10.1063/1.3687398
Liu H, Li X, Crooks RM (2013) Paper-based SlipPAD for high-throughput chemical sensing. Anal Chem 85(9):4263–4267. https://doi.org/10.1021/ac4008623
Lutz BR, Trinh P, Ball C, Fu E, Yager P (2011) Two-dimensional paper networks: programmable fluidic disconnects for multi-step processes in shaped paper. Lab Chip 11(24):4274–4278. https://doi.org/10.1039/C1LC20758J
Lutz B, Liang T, Fu E, Ramachandran S, Kauffman P, Yager P (2013) Dissolvable fluidic time delays for programming multi-step assays in instrument-free paper diagnostics. Lab Chip 13(14):2840–2847. https://doi.org/10.1039/C3LC50178G
Martinez AW, Phillips ST, Butte MJ, Whitesides GM (2007) Patterned paper as a platform for inexpensive, low-volume, portable bioassays. Angew Chem Int Ed 46(8):1318–1320. https://doi.org/10.1002/anie.200603817
Masoodi R, Pillai KM (2010) Darcy’s law-based model for wicking in paper-like swelling porous media. AIChE J 56(9):2257–2267. https://doi.org/10.1002/aic.12163
Mendez S, Fenton EM, Gallegos GR, Petsev DN, Sibbett SS, Stone HA, Zhang Y, López GP (2009) Imbibition in porous membranes of complex shape: quasi-stationary flow in thin rectangular segments. Langmuir 26(2):1380–1385. https://doi.org/10.1021/la902470b
Noh H, Phillips ST (2010a) Fluidic timers for time-dependent, point-of-care assays on paper. Anal Chem 82(19):8071–8078. https://doi.org/10.1021/ac1005537
Noh H, Phillips ST (2010b) Metering the capillary-driven flow of fluids in paper-based microfluidic devices. Anal Chem 82(10):4181–4187. https://doi.org/10.1021/ac100431y
Phillips EA, Shen R, Zhao S, Linnes JC (2016) Thermally actuated wax valves for paper-fluidic diagnostics. Lab Chip 16(21):4230–4236. https://doi.org/10.1039/C6LC00945J
Posthuma-Trumpie GA, Korf J, van Amerongen A (2009) Lateral flow (immuno) assay: its strengths, weaknesses, opportunities and threats. A literature survey. Anal Bioanal Chem 393(2):569–582. https://doi.org/10.1007/s00216-008-2287-2
Rath D, Sathishkumar N, Toley BJ (2018) Experimental measurement of parameters governing flow rates and partial saturation in paper-based microfluidic devices. Langmuir 34(30):8758–8766. https://doi.org/10.1021/acs.langmuir.8b01345
Renault C, Li X, Fosdick SE, Crooks RM (2013) Hollow-channel paper analytical devices. Anal Chem 85(16):7976–7979. https://doi.org/10.1021/ac401786h
Renault C, Anderson MJ, Crooks RM (2014) Electrochemistry in hollow-channel paper analytical devices. J Am Chem Soc 136(12):4616–4623. https://doi.org/10.1021/ja4118544
Rivas L, Medina-Sánchez M, de la Escosura-Muñiz A, Merkoçi A (2014) Improving sensitivity of gold nanoparticle-based lateral flow assays by using wax-printed pillars as delay barriers of microfluidics. Lab Chip 14(22):4406–4414. https://doi.org/10.1039/C4LC00972J
Shin JH, Park J, Kim SH, Park JK (2014) Programmed sample delivery on a pressurized paper. Biomicrofluidics 8(5):054121. https://doi.org/10.1063/1.4899773
Songok J, Toivakka M (2016) Enhancing capillary-driven flow for paper-based microfluidic channels. ACS Appl Mater Interfaces 8(44):30523–30530. https://doi.org/10.1021/acsami.6b08117
Toley BJ, McKenzie B, Liang T, Buser JR, Yager P, Fu E (2013) Tunable-delay shunts for paper microfluidic devices. Anal Chem 85(23):11545–11552. https://doi.org/10.1021/ac4030939
Toley BJ, Wang JA, Gupta M, Buser JR, Lafleur LK, Lutz BR, Fu E, Yager P (2015) A versatile valving toolkit for automating fluidic operations in paper microfluidic devices. Lab Chip 15(6):1432–1444. https://doi.org/10.1039/C4LC01155D
Weng CH, Chen MY, Shen CH, Yang RJ (2014) Colored wax-printed timers for two-dimensional and three-dimensional assays on paper-based devices. Biomicrofluidics 8(6):066502. https://doi.org/10.1063/1.4902246
Yetisen AK, Akram MS, Lowe CR (2013) Paper-based microfluidic point-of-care diagnostic devices. Lab Chip 13(12):2210–2251. https://doi.org/10.1039/C3LC50169H
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Jaitpal, S., Paul, D. (2019). Flow Control in Paper-Based Microfluidic Devices. In: Bhattacharya, S., Kumar, S., Agarwal, A. (eds) Paper Microfluidics. Advanced Functional Materials and Sensors. Springer, Singapore. https://doi.org/10.1007/978-981-15-0489-1_4
Download citation
DOI: https://doi.org/10.1007/978-981-15-0489-1_4
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-0488-4
Online ISBN: 978-981-15-0489-1
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)