Abstract
This paper deals with inspection of broken strands in steel wire ropes using magnetic flux leakage (MFL) detection method-based wire rope tester. In this paper, performance of different sensors is studied experimentally in order to select suitable sensor which can appropriately detect the leakage in magnetic flux due to the defect. The Hall voltage signal corresponding to the defect gives peak at the position of the defect. Maximum and minimum signal voltages from the base signal determines the peak-to-peak amplitude verifying the capability and sensitivity of the sensor. The result of this study shows that the analog Hall sensor-Sensor G with sensitivity −90 mV/mT and range 0–10 mT is suitable for detection of defects in a wire rope.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Tytko AA, Ridge IML (2003) The influence of rope tension on the LMA sensor output of magnetic NDT equipment for wire ropes. Nondest Test and Eval 19(4):153–163
Weischedel HR, Ramsey RP (1989) Electromagnetic testing, a reliable method for the inspection of wire ropes in service. NDT Int 22(3):155–161
Zawada K (1999) Magnetic NDT of steel wire ropes. J Nondestr Test Ultrason (Germany) 4(8)
Tian J, Zhou J, Wang H, Meng G (2015) Literature review of research on the technology of wire rope nondestructive inspection in China and Abroad. In: MATEC web of conferences, vol 22. EDP Sciences
A manual by Honeywell, Hall effects sensing and application by Honeywell, MICRO SWITCH Sensing and Control, USA
Wu B, Li G (2015) Design and simulation analysis of detection sensor of localized faults for wire rope
Cao Y, Zhang D, Wang C, Xu D (2006) More accurate localized wire rope testing based on Hall sensor array. Mater Eval 64(9):907–910
Singh WS, Rao BPC, Vaidyanathan S, Jayakumar T, Raj B (2007) Detection of leakage magnetic flux from near-side and far-side defects in carbon steel plates using a giant magneto-resistive sensor. Meas Sci Technol 19(1):015702
Zhang D, Zhao M, Zhou Z, Pan S (2013) Characterization of wire rope defects with gray level co-occurrence matrix of magnetic flux leakage images. J Nondestr Eval 32(1):37–43
Wei G, Jianxin C (2002) A transducer made up of fluxgate sensors for testing wire rope defects. IEEE Trans Instrum Meas 51(1):120–124
Baschirotto A, Dallago E, Malcovati P, Marchesi M, Venchi G, Rossini A (2006) Multilayer PCB planar fluxgate magnetic sensor. In: 2006 Ph.D. research in microelectronics and electronics. IEEE, pp 413–416
Jomdecha C, Prateepasen A (2009) Design of modified electromagnetic main-flux for steel wire rope inspection. NDT E Int 42(1):77–83
Tehranchi MM, Ranjbaran M, Eftekhari H (2011) Double core giant magneto-impedance sensors for the inspection of magnetic flux leakage from metal surface cracks. Sens Actuators A 170(1):55–61
Caruso MJ, Bratland T, Smith CH, Schneider R (1998) A new perspective on magnetic field sensing. Sensors 15:34–47
Tang SC, Duffy MC, Ripka P, Hurley WG (2004) Excitation circuit for fluxgate sensor using saturable inductor. Sens Actuators A 113(2):156–165
Sukhorukov VV (2013) MFL technology for diagnostics and prediction of object condition. In: The 12th international conference of the Slovenian society for NDT, pp 4–6
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Kaur, A. et al. (2018). Selection of a Hall Sensor for Usage in a Wire Rope Tester. In: Nandi, A., Sujatha, N., Menaka, R., Alex, J. (eds) Computational Signal Processing and Analysis. Lecture Notes in Electrical Engineering, vol 490. Springer, Singapore. https://doi.org/10.1007/978-981-10-8354-9_33
Download citation
DOI: https://doi.org/10.1007/978-981-10-8354-9_33
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-8353-2
Online ISBN: 978-981-10-8354-9
eBook Packages: EngineeringEngineering (R0)