Abstract
This paper presents recent developments on implicit parameterization techniques (based on the software SFE CONCEPT) for shape optimization of vehicles in the context of modern modular car body design. Because of the implicit definition of the parameters complemented by the mapping and re-meshing techniques inherent to the software, a flexible and powerful optimization approach can be realized, where the connectivity is maintained, the accuracy of finite element computations assured and the efficiency improved via appropriate definition of design variables and optimization algorithms. This is first demonstrated on component and module level and finally confirmed by a full vehicle problem.
F2012-E03-058
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Muffatto M (1999) Introducing a platform strategy in product development. Int J Prod Econ 60–61:145–153
Ishii F, Yang TG (2003) Modularity: international industry benchmarking and research roadmap. In: Proceedings of DETC/ASME design engineering technical conference and computers and information in engineering conference, Chicago, 2–6 Sept 2003, DFM-48132
Renner I (2007) Supporting methods for function oriented modular toolkit development with focus on the automotive industry (in German), PhD thesis, Technische Universität München, Munich
Duddeck F (2008) Multidisciplinary optimization of car bodies. Struct Multidisc Optim 35(4):375–389
Zimmer H, Prabhuwaingankar M, Duddeck F (2009) Topology- and geometry-based structure optimization using implicit parametric models and LS-OPT. In: Proceedings 7th European LS-DYNA conference, Salzburg
Georgios K, Dimitrios S (2009) Multi-disciplinary design optimization exploiting the efficiency of ANSA-LSOPT-META coupling. In: Proceedings 7th European LS-DYNA conference, Salzburg
Dietrich T (2013) PhD thesis, Fachgebiet computational mechanics, Technische Universität München, Munich, to be submitted, 2013
Hou S, Li Q, Long S, Yang X, Li W (2007) Design optimization of regular hexagonal thin-walled columns with crashworthiness criteria. Finite Elem Anal Des 43:555–565
Avalle M, Chiandussi G, Belingardi G (2002) Design optimization by response surface methodology: application to crashworthiness design of vehicle structures. Struct Multidisc Optim 24:325–332
Chiandussi G, Fontana R, Urbinati F (1998) Design sensitivity analysis method for multidisciplinary shape optimization problems with linear and non-linear response. Eng Comput 15:391–417
Chiandussi G, Bugeda G, Onate E (2000) Shape variable definition with C0, C1 and C2 continuity functions. Comput Meth Appl Mech Eng 188(4):727–742
Chiandussi G, Avalle M (2002) Maximisation of the crushing performance of a tubular device by shape optimisation. Comput Struct 80:2425–2432
Farkas L, Canadas C, Donders S, van Langenhove T, Tzannetakis N (2009) Optimization study of a parametric vehicle bumper subsystem under multiple load cases using LMS Virtual. Lab and OPTIMUS. In: Proceedings 7th European LS-DYNA conference, Salzburg
Farkas L, Donders S, Schildermans D, Moens D, Vandepitte D (2010) Optimisation study of a vehicle bumper subsystem with fuzzy parameters. In: Proceedings ISMA: international conference on noise and vibration engineering, Leuven
Heiserer D, Zimmer H (2004) Shape optimization in the early phase of car body development (in German). In: Proceedings VDI Conf on numerical analysis and simulation for vehicle engineering, Würzburg
Hilmann J, Paas M, Hänschke A, Vietor T (2007) Automatic concept model generation for optimisation and robust design of passenger cars. Adv Eng Softw 38:795–801
Hilmann J (2009) On the development of a process chain for structural optimization in vehicle passive safety. PhD thesis, Technische Universität Berlin, Berlin
Hilmann J, Scalera S, Arlt A (2011) Correlation of simulation models using concept modeling. In: Proceedings European hyperworks technical conference
Meyer O, Krumenaker T, Bernhard R, Dreses C, Schelkle E, Hänschke A, Pohl T, Hillebrand A, Zimmer H (2010) Parametrischer Bauraum-synchronisierter Fahrzeugentwurf. In: Proceedings SIMVEC, Baden Baden
Duddeck F (2007) Survey on robust design and optimisation for crashworthiness. In: Duddeck F, Bletzinger K-U, Bucher C, Matthies H, Meyer M (eds) Proceedings EUROMECH colloquium 482 efficient methods for robust design and optimisation, Queen Mary University of London, London
Lu G, Yu T (2003) Energy absorption of structures and materials. Woodhead Publ Ltd, Cambridge
Kim H-S, Chen W, Wierzbicki T (2002) Weight and crash optimization of foam-filled three-dimensional S-frame. Comput Mech 28:417–424
Yin H, Wena G, Hou S, Chen K (2011) Crushing analysis and multiobjective crashworthiness optimization of honeycomb-filled single and bitubular polygonal tubes. Mater Des 32:4449–4460
Zarei H, Kröger M (2008) Optimum honeycomb filled crash absorber design. Mater Des 29:193–204
Zhang Z, Liu S, Tang Z (2009) Design optimization of cross-sectional configuration of rib-reinforced thin-walled beam. Thin-Walled Struct 47:868–878
Eby DJ, Averill RC, Goodman ED, Sidhua RS (2002) Shape optimization of crashworthy structures. Proceedings 7th international LS-DYNA users conference
Rayamajhi M, Duddeck F, Hunkeler S (2010) Shape optimisation of vehicle frontal structure using evolutionary algorithm. In: Duddeck F, Querin OM, Sienz J, Toropov VV, Shaheed MH (eds) Proceedings 8th ASMO UK/ISSMO conference on engineering design optimization, product and process improvement, Queen Mary University of London, London, July 2010
Rayamajhi M (2013) PhD thesis, Queen Mary University of London, UK, to be submitted 2013
Wu H, Xin Y (2009) Optimal design of the S-Rail for crashworthiness analysis IEEE. In: Proceedings international joint conference on computational sciences and optimization
Wang H, Müllerschön H, Mehrens T (2005) Shape optimization of a crashbox using hyperMorph and LS-OPT. In: Proceedings 4th German LS-DYNA forum, Bamberg
Cho Y-B, Bae C-H, Suh M-W, Sin H-C (2006) A vehicle front frame crash design optimization using hole-type and dent-type crush initiator. Thin-walled Struct 44:415–428
Redhe M, Nilsson L, Bergman F, Stander N (2005) Shape optimization of a vehicle Crash-box using LS-OPT. In: Proceedings 5th European LS-DYNA users conference, 5a-27
Averill RC (2004) Efficient shape optimization of crashworthy structures using a new substructuring method. 3rd LS-DYNA users forum, Bamberg
Chase N, Sidhu R, Averill RC (2012) A new method for efficient global optimization of large systems using sub-models: HEEDS COMPOSE demonstrated on a crash optimization problem. LS-DYNA user forum
Volz K (2011) Physikalisch begründete Ersatzmodelle für die Crashoptimierung von Karosseriestrukturen in frühen Projektphasen. PhD thesis, FG computational mechanics, Technische Universität München, Munich
Duddeck F, Volz K (2012) A new topology optimization approach for crashworthiness of passenger vehicles based on physically defined equivalent static loads. In: Proceedings ICRASH conference, Milano
Volkswagen (2010) Annual media conference
Suh ES, de Weck O, Yong Kim I, Chang D (2007) Flexible platform component design under uncertainty. J Intell Manuf 18:115–126
Hänschke A, Zhou S, Lee M, Hilmann J, Kaba E, Prabhuwaingankar M (2007) Parametric model knowledgebase for vehicle design to improve the early vehicle attribute assessments. In: Proceedings international automotive body congress (IABC), Berlin
Xu S (2007) Use of topology design exploration and parametric shape optimization process to development highly efficient and lightweight vehicle body structure. In: Proceedings international automotive body congress (IABC), Berlin
Volz K, Dirschmid F, Duddeck F (2006) Body-in-white crash optimization in the early phase of product development. In: Proceedings VDI conference on numerical analysis and simulation in vehicle engineering, Würzburg
Volz K, Frodl B, Zimmer H (2007) Optimizing topology and shape for crashworthiness in vehicle product development. In: Proceedings international automotive body congress (IABC), Berlin
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Duddeck, F., Zimmer, H. (2013). Modular Car Body Design and Optimization by an Implicit Parameterization Technique via SFE CONCEPT. In: Proceedings of the FISITA 2012 World Automotive Congress. Lecture Notes in Electrical Engineering, vol 195. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-33835-9_39
Download citation
DOI: https://doi.org/10.1007/978-3-642-33835-9_39
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-33834-2
Online ISBN: 978-3-642-33835-9
eBook Packages: EngineeringEngineering (R0)