Abstract
The principles of designing hydraulic cylinders are generally known, but metals are assumed to be typical design materials for cylinders, which results in the use of standard design solutions and typical manufacturing technologies. However, the use of special design materials, e.g. plastics or composites, may require a departure from traditional, generic methods, or at least an adaptation of them. The article presents the specificity of designing cylinders made of plastics, which have been determined as a result of research presented in the author's earlier publications. The specificity of the designing is presented in an orderly manner, by following the stages of the author’s algorithm for designing cylinders made of plastics. The specific challenges connected with this process are presented, which are different for the designing of plastic cylinders and metal cylinders. Some suggested solutions and examples of their practical application are also indicated. In the summary, possibilities offered by the use of plastics in hydraulic cylinders are considered.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Stryczek, J., Banaś, M., Krawczyk, J., Marciniak, L., Stryczek, P.: The fluid power elements and systems made of plastics. Procedia Eng. 176, 600–609 (2017)
Stryczek, J.: Plastics-a new trend in design hydraulic elements and systems. In: Stryczek, J., Warzyńska, U. (eds.) NSHP 2020. LNME, pp. 427–439. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-59509-8_40
Rodionov, L., et al.: Challenges in design process of gear micropump from plastics. Arch. Civ. Mech. Eng. 21, 1 (2021). art. 34
Gamez-Montero, P.J., et al.: Magnet-sleeve-sealed mini trochoidal-gear pomp prototype with polymer compozite gear. Energies 10(10), 1458 (2017)
Krawczyk, J., Stryczek, J.: Design and experimental research of plastic gerotor pump. In: Proceedings of Global Fluid Power Society Ph.D. Symposium, Samara (2018)
Stryczek, J., Stryczek, P.: Synthetic approach to the design, manufacturing and examination of gerotor and orbital hydraulic machines. Energies 14(3), 1–31 (2021). art. 624
Banaś, M., Antoniak, P., Marciniak, L., Stryczek, J.: Visualisation of flow phenomena in hydraulic throttle valves of plastic. In: Proceedings of the 14th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV), Lisbon (2018)
Lubecki, M., Stosiak, M., Skačkauskas, P., Karpenko, M., Deptuła, A., Urbanowicz, K.: Development of composite hydraulic actuators: a review. Actuators 11(12), 1–15 (2022). art. 365
Solazzi, L.: Design and experimental tests on hydraulic actuator made of composite material. Compos. Struct. 232, 111544 (2020)
Lubecki, M., Stosiak, M., Gazińska, M.: Numerical and experimental analysis of the base of a composite hydraulic cylinder made of PET. In: Stryczek, J., Warzyńska, U. (eds.) NSHP 2020. LNME, pp. 396–405. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-59509-8_36
Stryczek, P.: Challenges in the designing process of hydraulic cylinders made of plastics. In: Procedings of Global Fluid Power Society Ph.D. Symposium (GFPS), Naples, Italy (2022)
Schulze, T., Weber, J. , Banaś, M., Stryczek, P.: Plastic components for electro-hydrostatic drives. In:13th International Fluid Power Conference (13. IFK), Aachen, Germany (2022)
Skowrońska, J., Zaczyński, J., Kosucki, A., Stawiński, Ł: Modern materials and surface modification methods used in the manufacture of hydraulic actuators. In: Stryczek, J., Warzyńska, U. (eds.) NSHP 2020. LNME, pp. 427–439. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-59509-8_39
Pahl, G., Beitz, W.: Engineering Design. Springer, Heidelberg (1999)
Stryczek, S.: Hydrostatic drive. Wydawnictwo Naukowo-Techniczne, Warszawa (1984)
Marutov, W.A., Pawłowskij, S.A.: Hydraulic cylinders design and calculations. Wydawnictwo Naukowo-Techniczne, Warszawa (1968)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Stryczek, P. (2024). Specificity of Designing Hydraulic Cylinders Made of Plastics. In: Stryczek, J., Warzyńska, U. (eds) Advances in Hydraulic and Pneumatic Drives and Control 2023. NSHP 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-43002-2_20
Download citation
DOI: https://doi.org/10.1007/978-3-031-43002-2_20
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-43001-5
Online ISBN: 978-3-031-43002-2
eBook Packages: EngineeringEngineering (R0)